netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Lobakin <alobakin@marvell.com>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Alexander Lobakin <alobakin@marvell.com>,
	Igor Russkikh <irusskikh@marvell.com>,
	Michal Kalderon <michal.kalderon@marvell.com>,
	"Ariel Elior" <aelior@marvell.com>,
	Denis Bolotin <denis.bolotin@marvell.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Andrew Lunn <andrew@lunn.ch>, <GR-everest-linux-l2@marvell.com>,
	<QLogic-Storage-Upstream@marvell.com>, <netdev@vger.kernel.org>,
	<linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 net-next 06/16] qed: use transceiver data to fill link partner's advertising speeds
Date: Mon, 20 Jul 2020 21:08:05 +0300	[thread overview]
Message-ID: <20200720180815.107-7-alobakin@marvell.com> (raw)
In-Reply-To: <20200720180815.107-1-alobakin@marvell.com>

Currently qed driver does not take into consideration transceiver's
capabilities when generating link partner's speed advertisement. This
leads to e.g. incorrect ethtool link info on 10GbaseT modules.
Use transceiver info not only for advertisement and support arrays, but
also for link partner's abilities to fix it.

Misc: fix a couple of comments nearby.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 49 +++++++++++++---------
 1 file changed, 29 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 172a107f9299..2be9ed39c450 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1879,6 +1879,27 @@ static void qed_fill_link_capability(struct qed_hwfn *hwfn,
 	}
 }
 
+static void qed_lp_caps_to_speed_mask(u32 caps, u32 *speed_mask)
+{
+	*speed_mask = 0;
+
+	if (caps &
+	    (QED_LINK_PARTNER_SPEED_1G_FD | QED_LINK_PARTNER_SPEED_1G_HD))
+		*speed_mask |= NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_1G;
+	if (caps & QED_LINK_PARTNER_SPEED_10G)
+		*speed_mask |= NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_10G;
+	if (caps & QED_LINK_PARTNER_SPEED_20G)
+		*speed_mask |= NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_20G;
+	if (caps & QED_LINK_PARTNER_SPEED_25G)
+		*speed_mask |= NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_25G;
+	if (caps & QED_LINK_PARTNER_SPEED_40G)
+		*speed_mask |= NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_40G;
+	if (caps & QED_LINK_PARTNER_SPEED_50G)
+		*speed_mask |= NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_50G;
+	if (caps & QED_LINK_PARTNER_SPEED_100G)
+		*speed_mask |= NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_BB_100G;
+}
+
 static void qed_fill_link(struct qed_hwfn *hwfn,
 			  struct qed_ptt *ptt,
 			  struct qed_link_output *if_link)
@@ -1886,7 +1907,7 @@ static void qed_fill_link(struct qed_hwfn *hwfn,
 	struct qed_mcp_link_capabilities link_caps;
 	struct qed_mcp_link_params params;
 	struct qed_mcp_link_state link;
-	u32 media_type;
+	u32 media_type, speed_mask;
 
 	memset(if_link, 0, sizeof(*if_link));
 
@@ -1917,13 +1938,18 @@ static void qed_fill_link(struct qed_hwfn *hwfn,
 	else
 		phylink_clear(if_link->advertised_caps, Autoneg);
 
-	/* Fill link advertised capability*/
+	/* Fill link advertised capability */
 	qed_fill_link_capability(hwfn, ptt, params.speed.advertised_speeds,
 				 if_link->advertised_caps);
-	/* Fill link supported capability*/
+
+	/* Fill link supported capability */
 	qed_fill_link_capability(hwfn, ptt, link_caps.speed_capabilities,
 				 if_link->supported_caps);
 
+	/* Fill partner advertised capability */
+	qed_lp_caps_to_speed_mask(link.partner_adv_speed, &speed_mask);
+	qed_fill_link_capability(hwfn, ptt, speed_mask, if_link->lp_caps);
+
 	if (link.link_up)
 		if_link->speed = link.speed;
 
@@ -1941,23 +1967,6 @@ static void qed_fill_link(struct qed_hwfn *hwfn,
 	if (params.pause.forced_tx)
 		if_link->pause_config |= QED_LINK_PAUSE_TX_ENABLE;
 
-	/* Link partner capabilities */
-
-	if (link.partner_adv_speed & QED_LINK_PARTNER_SPEED_1G_FD)
-		phylink_set(if_link->lp_caps, 1000baseT_Full);
-	if (link.partner_adv_speed & QED_LINK_PARTNER_SPEED_10G)
-		phylink_set(if_link->lp_caps, 10000baseKR_Full);
-	if (link.partner_adv_speed & QED_LINK_PARTNER_SPEED_20G)
-		phylink_set(if_link->lp_caps, 20000baseKR2_Full);
-	if (link.partner_adv_speed & QED_LINK_PARTNER_SPEED_25G)
-		phylink_set(if_link->lp_caps, 25000baseKR_Full);
-	if (link.partner_adv_speed & QED_LINK_PARTNER_SPEED_40G)
-		phylink_set(if_link->lp_caps, 40000baseLR4_Full);
-	if (link.partner_adv_speed & QED_LINK_PARTNER_SPEED_50G)
-		phylink_set(if_link->lp_caps, 50000baseKR2_Full);
-	if (link.partner_adv_speed & QED_LINK_PARTNER_SPEED_100G)
-		phylink_set(if_link->lp_caps, 100000baseKR4_Full);
-
 	if (link.an_complete)
 		phylink_set(if_link->lp_caps, Autoneg);
 	if (link.partner_adv_pause)
-- 
2.25.1


  parent reply	other threads:[~2020-07-20 18:09 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-20 18:07 [PATCH v3 net-next 00/16] qed, qede: add support for new operating modes Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 01/16] linkmode: introduce linkmode_intersects() Alexander Lobakin
2020-07-20 18:31   ` Andrew Lunn
2020-07-20 18:08 ` [PATCH v3 net-next 02/16] qed, qede, qedf: convert link mode from u32 to ETHTOOL_LINK_MODE Alexander Lobakin
2020-07-20 18:34   ` Andrew Lunn
2020-07-20 18:08 ` [PATCH v3 net-next 03/16] qede: populate supported link modes maps on module init Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 04/16] qed: reformat public_port::transceiver_data a bit Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 05/16] qed: add support for multi-rate transceivers Alexander Lobakin
2020-07-20 18:08 ` Alexander Lobakin [this message]
2020-07-20 18:08 ` [PATCH v3 net-next 07/16] qed: reformat several structures a bit Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 08/16] qed: add support for Forward Error Correction Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 09/16] qede: format qede{,_vf}_ethtool_ops Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 10/16] qede: introduce support for FEC control Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 11/16] qed: reformat several structures a bit Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 12/16] qed: remove unused qed_hw_info::port_mode and QED_PORT_MODE Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 13/16] qed: add support for new port modes Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 14/16] qed: add missing loopback modes Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 15/16] qed: populate supported link modes maps on module init Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 16/16] qed: add support for the extended speed and FEC modes Alexander Lobakin
2020-07-21  0:14 ` [PATCH v3 net-next 00/16] qed, qede: add support for new operating modes Jakub Kicinski
2020-07-21  1:00 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200720180815.107-7-alobakin@marvell.com \
    --to=alobakin@marvell.com \
    --cc=GR-everest-linux-l2@marvell.com \
    --cc=QLogic-Storage-Upstream@marvell.com \
    --cc=aelior@marvell.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=denis.bolotin@marvell.com \
    --cc=irusskikh@marvell.com \
    --cc=jejb@linux.ibm.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=michal.kalderon@marvell.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).