From: Jacob Keller <jacob.e.keller@intel.com>
To: netdev@vger.kernel.org
Cc: Jacob Keller <jacob.e.keller@intel.com>
Subject: [net-next v2 3/5] ice: add support for flash update overwrite mask
Date: Fri, 31 Jul 2020 17:21:57 -0700 [thread overview]
Message-ID: <20200801002159.3300425-4-jacob.e.keller@intel.com> (raw)
In-Reply-To: <20200801002159.3300425-1-jacob.e.keller@intel.com>
The ice driver has the ability to inform firmware of what sections of
flash to preserve when performing an update. Expose this support via the
recently added overwrite_mask support. Based on which sections are
specified, determine the equivalent preservation level and inform
firmware.
Reject combinations of sections that cannot be handled by the
preservation levels. Specifically, a request to overwrite identifiers
but not settings cannot be done, so it is rejected as not supported.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
Changes since v1
* add this patch containing the ice changes as a separate commit
Documentation/networking/devlink/ice.rst | 31 +++++++++++++++++++
drivers/net/ethernet/intel/ice/ice_devlink.c | 19 +++++++++++-
.../net/ethernet/intel/ice/ice_fw_update.c | 16 ++++++++--
.../net/ethernet/intel/ice/ice_fw_update.h | 2 +-
4 files changed, 64 insertions(+), 4 deletions(-)
diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst
index 237848d56f9b..8eb50ba41f1a 100644
--- a/Documentation/networking/devlink/ice.rst
+++ b/Documentation/networking/devlink/ice.rst
@@ -81,6 +81,37 @@ The ``ice`` driver reports the following versions
- 0xee16ced7
- The first 4 bytes of the hash of the netlist module contents.
+Flash Update
+============
+
+The ``ice`` driver implements support for flash update using the
+``devlink-flash`` interface. It supports updating the device flash using a
+combined flash image that contains the ``fw.mgmt``, ``fw.undi``, and
+``fw.netlist`` components.
+
+.. list-table:: List of supported overwrite modes
+ :widths: 5 95
+
+ * - Bits
+ - Behavior
+ * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS``
+ - Do not preserve settings stored in the flash components being
+ updated. This includes overwriting the port configuration that
+ determines the number of physical functions the device will
+ initialize with.
+ * - ``DEVLINK_FLASH_OVERWRITE_SETTINGS`` and ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS``
+ - Do not preserve either settings or identifiers. Overwrite everything
+ in the flash with the contents from the provided image, without
+ performing any preservation. This includes overwriting device
+ identifying fields such as the MAC address, VPD area, and device
+ serial number. It is expected that this combination be used with an
+ image customized for the specific device.
+
+The ice hardware does not support overwriting only identifiers while
+preserving settings, and thus ``DEVLINK_FLASH_OVERWRITE_IDENTIFIERS`` on its
+own will be rejected. If no overwrite mask is provided, the firmware will be
+instructed to preserve all settings and identifying fields when updating.
+
Regions
=======
diff --git a/drivers/net/ethernet/intel/ice/ice_devlink.c b/drivers/net/ethernet/intel/ice/ice_devlink.c
index c8255235f7c4..d2cb9144c63f 100644
--- a/drivers/net/ethernet/intel/ice/ice_devlink.c
+++ b/drivers/net/ethernet/intel/ice/ice_devlink.c
@@ -250,8 +250,24 @@ ice_devlink_flash_update(struct devlink *devlink,
struct device *dev = &pf->pdev->dev;
struct ice_hw *hw = &pf->hw;
const struct firmware *fw;
+ u8 preservation;
int err;
+ if (!params->overwrite_mask) {
+ /* preserve all settings and identifiers */
+ preservation = ICE_AQC_NVM_PRESERVE_ALL;
+ } else if (params->overwrite_mask == DEVLINK_FLASH_OVERWRITE_SETTINGS) {
+ /* overwrite settings, but preserve the vital device identifiers */
+ preservation = ICE_AQC_NVM_PRESERVE_SELECTED;
+ } else if (params->overwrite_mask == (DEVLINK_FLASH_OVERWRITE_SETTINGS |
+ DEVLINK_FLASH_OVERWRITE_IDENTIFIERS)) {
+ /* overwrite both settings and identifiers, preserve nothing */
+ preservation = ICE_AQC_NVM_NO_PRESERVATION;
+ } else {
+ NL_SET_ERR_MSG_MOD(extack, "Requested overwrite mask is not supported");
+ return -EOPNOTSUPP;
+ }
+
if (!hw->dev_caps.common_cap.nvm_unified_update) {
NL_SET_ERR_MSG_MOD(extack, "Current firmware does not support unified update");
return -EOPNOTSUPP;
@@ -270,7 +286,7 @@ ice_devlink_flash_update(struct devlink *devlink,
devlink_flash_update_begin_notify(devlink);
devlink_flash_update_status_notify(devlink, "Preparing to flash",
NULL, 0, 0);
- err = ice_flash_pldm_image(pf, fw, extack);
+ err = ice_flash_pldm_image(pf, fw, preservation, extack);
devlink_flash_update_end_notify(devlink);
release_firmware(fw);
@@ -279,6 +295,7 @@ ice_devlink_flash_update(struct devlink *devlink,
}
static const struct devlink_ops ice_devlink_ops = {
+ .supported_flash_update_params = DEVLINK_SUPPORT_FLASH_UPDATE_OVERWRITE_MASK,
.info_get = ice_devlink_info_get,
.flash_update = ice_devlink_flash_update,
};
diff --git a/drivers/net/ethernet/intel/ice/ice_fw_update.c b/drivers/net/ethernet/intel/ice/ice_fw_update.c
index deaefe00c9c0..c81273000d88 100644
--- a/drivers/net/ethernet/intel/ice/ice_fw_update.c
+++ b/drivers/net/ethernet/intel/ice/ice_fw_update.c
@@ -630,6 +630,7 @@ static const struct pldmfw_ops ice_fwu_ops = {
* ice_flash_pldm_image - Write a PLDM-formatted firmware image to the device
* @pf: private device driver structure
* @fw: firmware object pointing to the relevant firmware file
+ * @preservation: preservation level to request from firmware
* @extack: netlink extended ACK structure
*
* Parse the data for a given firmware file, verifying that it is a valid PLDM
@@ -643,7 +644,7 @@ static const struct pldmfw_ops ice_fwu_ops = {
* Returns: zero on success or a negative error code on failure.
*/
int ice_flash_pldm_image(struct ice_pf *pf, const struct firmware *fw,
- struct netlink_ext_ack *extack)
+ u8 preservation, struct netlink_ext_ack *extack)
{
struct device *dev = ice_pf_to_dev(pf);
struct ice_hw *hw = &pf->hw;
@@ -651,13 +652,24 @@ int ice_flash_pldm_image(struct ice_pf *pf, const struct firmware *fw,
enum ice_status status;
int err;
+ switch (preservation) {
+ case ICE_AQC_NVM_PRESERVE_ALL:
+ case ICE_AQC_NVM_PRESERVE_SELECTED:
+ case ICE_AQC_NVM_NO_PRESERVATION:
+ case ICE_AQC_NVM_FACTORY_DEFAULT:
+ break;
+ default:
+ WARN(1, "Unexpected preservation level request %u", preservation);
+ return -EINVAL;
+ }
+
memset(&priv, 0, sizeof(priv));
priv.context.ops = &ice_fwu_ops;
priv.context.dev = dev;
priv.extack = extack;
priv.pf = pf;
- priv.activate_flags = ICE_AQC_NVM_PRESERVE_ALL;
+ priv.activate_flags = preservation;
status = ice_acquire_nvm(hw, ICE_RES_WRITE);
if (status) {
diff --git a/drivers/net/ethernet/intel/ice/ice_fw_update.h b/drivers/net/ethernet/intel/ice/ice_fw_update.h
index 79472cc618b4..c6390f6851ff 100644
--- a/drivers/net/ethernet/intel/ice/ice_fw_update.h
+++ b/drivers/net/ethernet/intel/ice/ice_fw_update.h
@@ -5,7 +5,7 @@
#define _ICE_FW_UPDATE_H_
int ice_flash_pldm_image(struct ice_pf *pf, const struct firmware *fw,
- struct netlink_ext_ack *extack);
+ u8 preservation, struct netlink_ext_ack *extack);
int ice_check_for_pending_update(struct ice_pf *pf, const char *component,
struct netlink_ext_ack *extack);
--
2.28.0.163.g6104cc2f0b60
next prev parent reply other threads:[~2020-08-01 0:22 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-01 0:21 [net-next v2 0/5] devlink flash update overwrite mask Jacob Keller
2020-08-01 0:21 ` [net-next v2 1/5] devlink: convert flash_update to use params structure Jacob Keller
2020-08-03 15:46 ` Jiri Pirko
2020-08-01 0:21 ` [net-next v2 2/5] devlink: introduce flash update overwrite mask Jacob Keller
2020-08-03 15:38 ` Jiri Pirko
2020-08-03 16:53 ` Jacob Keller
2020-08-03 23:08 ` Jacob Keller
2020-08-01 0:21 ` Jacob Keller [this message]
2020-08-01 0:21 ` [iproute2-next v2 4/5] Update devlink header for overwrite mask attribute Jacob Keller
2020-08-01 0:21 ` [iproute2-next v2 5/5] devlink: support setting the overwrite mask Jacob Keller
2020-08-03 15:53 ` David Ahern
2020-08-03 16:20 ` Jiri Pirko
2020-08-03 16:56 ` Jacob Keller
2020-08-03 21:20 ` David Ahern
2020-08-03 22:44 ` Jacob Keller
2020-08-03 23:30 ` Jacob Keller
2020-08-03 23:54 ` David Ahern
2020-08-04 18:31 ` Jacob Keller
2020-08-03 15:28 ` [net-next v2 0/5] devlink flash update " Jiri Pirko
2020-08-03 16:51 ` Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200801002159.3300425-4-jacob.e.keller@intel.com \
--to=jacob.e.keller@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).