Re: [PATCH net v6 0/6] net: marvell: prestera: Add Switchdev driver for Prestera family ASIC device 98DX3255 (AC3x)

[Vadym Kochan <vadym.kochan@plvision.eu>]

Sorry, I mistakenly used "net" instead of "net-next" as label.

On Wed, Sep 02, 2020 at 06:04:36PM +0300, Vadym Kochan wrote:
> Marvell Prestera 98DX3255 integrates up to 24 ports of 1GbE with 8
> ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely
> wireless SMB deployment.
> 
> Prestera Switchdev is a firmware based driver that operates via PCI bus.  The
> current implementation supports only boards designed for the Marvell Switchdev
> solution and requires special firmware.
> 
> This driver implementation includes only L1, basic L2 support, and RX/TX.
> 
> The core Prestera switching logic is implemented in prestera_main.c, there is
> an intermediate hw layer between core logic and firmware. It is
> implemented in prestera_hw.c, the purpose of it is to encapsulate hw
> related logic, in future there is a plan to support more devices with
> different HW related configurations.
> 
> The following Switchdev features are supported:
> 
>     - VLAN-aware bridge offloading
>     - VLAN-unaware bridge offloading
>     - FDB offloading (learning, ageing)
>     - Switchport configuration
> 
> The original firmware image is uploaded to the linux-firmware repository.
> 
> PATCH v6:
>     1) Use rwlock to protect port list on create/delete stages. The list
>        is mostly readable by fw event handler or packets receiver, but
>        updated only on create/delete port which are performed on switch init/fini
>        stages.
> 
>     2) Remove not needed variable initialization in prestera_dsa.c:prestera_dsa_parse()
> 
>     3) Get rid of bounce buffer used by tx handler in prestera_rxtx.c,
>        the bounce buffer should be handled by dma_xxx API via swiotlb.
> 
>     4) Fix PRESTERA_SDMA_RX_DESC_PKT_LEN macro by using correct GENMASK(13, 0) in prestera_rxtx.c
> 
>     Patches updated:
>         [1] net: marvell: prestera: Add driver for Prestera family ASIC devices
> 
> PATCH v5:
>     0) add Co-developed tags for people who was involved in development.
> 
>     1) Make SPDX license as separate comment
> 
>     2) Change 'u8 *' -> 'void *', It allows to avoid not-needed u8* casting.
> 
>     3) Remove "," in terminated enum's.
> 
>     4) Use GENMASK(end, start) where it is applicable in.
> 
>     5) Remove not-needed 'u8 *' casting.
> 
>     6) Apply common error-check pattern
> 
>     7) Use ether_addr_copy instead of memcpy
> 
>     8) Use define for maximum MAC address range (255)
> 
>     9) Simplify prestera_port_state_set() in prestera_main.c by
>        using separate if-blocks for state setting:
>     
>         if (is_up) {
>         ...
>         } else {
>         ...
>         }
> 
>       which makes logic more understandable.
> 
>     10) Simplify sdma tx wait logic when checking/updating tx_ring->burst.
> 
>     11) Remove not-needed packed & aligned attributes
> 
>     12) Use USEC_PER_MSEC as multiplier when converting ms -> usec on calling
>         readl_poll_timeout.
> 
>     13) Simplified some error path handling by simple return error code in.
> 
>     14) Remove not-needed err assignment in.
> 
>     15) Use dev_err() in prestera_devlink_register(...).
> 
>     Patches updated:
>         [1] net: marvell: prestera: Add driver for Prestera family ASIC devices
> 	[2] net: marvell: prestera: Add PCI interface support
>         [3] net: marvell: prestera: Add basic devlink support
> 	[4] net: marvell: prestera: Add ethtool interface support
> 	[5] net: marvell: prestera: Add Switchdev driver implementation
> 
> PATCH v4:
>     1) Use prestera_ prefix in netdev_ops variable.
> 
>     2) Kconfig: use 'default PRESTERA' build type for CONFIG_PRESTERA_PCI to be
>        synced by default with prestera core module.
> 
>     3) Use memcpy_xxio helpers in prestera_pci.c for IO buffer copying.
> 
>     4) Generate fw image path via snprintf() instead of macroses.
> 
>     5) Use pcim_ helpers in prestera_pci.c which simplified the
>        probe/remove logic.
> 
>     6) Removed not needed initializations of variables which are used in
>        readl_poll_xxx() helpers.
> 
>     7) Fixed few grammar mistakes in patch[2] description.
> 
>     8) Export only prestera_ethtool_ops struct instead of each
>        ethtool handler.
> 
>     9) Add check for prestera_dev_check() in switchdev event handling to
>        make sure there is no wrong topology.
> 
>     Patches updated:
>         [1] net: marvell: prestera: Add driver for Prestera family ASIC devices
> 	[2] net: marvell: prestera: Add PCI interface support
> 	[4] net: marvell: prestera: Add ethtool interface support
> 	[5] net: marvell: prestera: Add Switchdev driver implementation
> 
> PATCH v3:
>     1) Simplify __be32 type casting in prestera_dsa.c
> 
>     2) Added per-patch changelog under "---" line.
> 
> PATCH v2:
>     1) Use devlink_port_type_clear()
> 
>     2) Add _MS prefix to timeout defines.
> 
>     3) Remove not-needed packed attribute from the firmware ipc structs,
>        also the firmware image needs to be uploaded too (will do it soon).
> 
>     4) Introduce prestera_hw_switch_fini(), to be mirrored with init and
>        do simple validation if the event handlers are unregistered.
> 
>     5) Use kfree_rcu() for event handler unregistering.
> 
>     6) Get rid of rcu-list usage when dealing with ports, not needed for
>        now.
> 
>     7) Little spelling corrections in the error/info messages.
> 
>     8) Make pci probe & remove logic mirrored.
> 
>     9) Get rid of ETH_FCS_LEN in headroom setting, not needed.
> 
> PATCH:
>     1) Fixed W=1 warnings
> 
>     2) Renamed PCI driver name to be more generic "Prestera DX" because
>        there will be more devices supported.
> 
>     3) Changed firmware image dir path: marvell/ -> mrvl/prestera/
>        to be aligned with location in linux-firmware.git (if such
>        will be accepted).
> 
> RFC v3:
>     1) Fix prestera prefix in prestera_rxtx.c
> 
>     2) Protect concurrent access from multiple ports on multiple CPU system
>        on tx path by spinlock in prestera_rxtx.c
> 
>     3) Try to get base mac address from device-tree, otherwise use a random generated one.
> 
>     4) Move ethtool interface support into separate prestera_ethtool.c file.
> 
>     5) Add basic devlink support and get rid of physical port naming ops.
> 
>     6) Add STP support in Switchdev driver.
> 
>     7) Removed MODULE_AUTHOR
> 
>     8) Renamed prestera.c -> prestera_main.c, and kernel module to
>        prestera.ko
> 
> RFC v2:
>     1) Use "pestera_" prefix in struct's and functions instead of mvsw_pr_
> 
>     2) Original series split into additional patches for Switchdev ethtool support.
> 
>     3) Use major and minor firmware version numbers in the firmware image filename.
> 
>     4) Removed not needed prints.
> 
>     5) Use iopoll API for waiting on register's value in prestera_pci.c
> 
>     6) Use standart approach for describing PCI ID matching section instead of using
>        custom wrappers in prestera_pci.c
> 
>     7) Add RX/TX support in prestera_rxtx.c.
> 
>     8) Rewritten prestera_switchdev.c with following changes:
>        - handle netdev events from prestera.c
> 
>        - use struct prestera_bridge for bridge objects, and get rid of
>          struct prestera_bridge_device which may confuse.
> 
>        - use refcount_t
> 
>     9) Get rid of macro usage for sending fw requests in prestera_hw.c
> 
>     10) Add base_mac setting as module parameter. base_mac is required for
>         generation default port's mac.
> 
> Vadym Kochan (6):
>   net: marvell: prestera: Add driver for Prestera family ASIC devices
>   net: marvell: prestera: Add PCI interface support
>   net: marvell: prestera: Add basic devlink support
>   net: marvell: prestera: Add ethtool interface support
>   net: marvell: prestera: Add Switchdev driver implementation
>   dt-bindings: marvell,prestera: Add description for device-tree
>     bindings
> 
>  .../bindings/net/marvell,prestera.txt         |   34 +
>  drivers/net/ethernet/marvell/Kconfig          |    1 +
>  drivers/net/ethernet/marvell/Makefile         |    1 +
>  drivers/net/ethernet/marvell/prestera/Kconfig |   25 +
>  .../net/ethernet/marvell/prestera/Makefile    |    7 +
>  .../net/ethernet/marvell/prestera/prestera.h  |  209 +++
>  .../marvell/prestera/prestera_devlink.c       |  114 ++
>  .../marvell/prestera/prestera_devlink.h       |   26 +
>  .../ethernet/marvell/prestera/prestera_dsa.c  |  106 ++
>  .../ethernet/marvell/prestera/prestera_dsa.h  |   37 +
>  .../marvell/prestera/prestera_ethtool.c       |  759 ++++++++++
>  .../marvell/prestera/prestera_ethtool.h       |   14 +
>  .../ethernet/marvell/prestera/prestera_hw.c   | 1227 ++++++++++++++++
>  .../ethernet/marvell/prestera/prestera_hw.h   |  185 +++
>  .../ethernet/marvell/prestera/prestera_main.c |  665 +++++++++
>  .../ethernet/marvell/prestera/prestera_pci.c  |  778 ++++++++++
>  .../ethernet/marvell/prestera/prestera_rxtx.c |  834 +++++++++++
>  .../ethernet/marvell/prestera/prestera_rxtx.h |   21 +
>  .../marvell/prestera/prestera_switchdev.c     | 1289 +++++++++++++++++
>  .../marvell/prestera/prestera_switchdev.h     |   16 +
>  20 files changed, 6348 insertions(+)
>  create mode 100644 drivers/net/ethernet/marvell/prestera/Kconfig
>  create mode 100644 drivers/net/ethernet/marvell/prestera/Makefile
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera.h
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_devlink.c
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_devlink.h
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_dsa.c
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_dsa.h
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_ethtool.c
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_ethtool.h
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_hw.c
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_hw.h
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_main.c
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_pci.c
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_rxtx.c
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_rxtx.h
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_switchdev.c
>  create mode 100644 drivers/net/ethernet/marvell/prestera/prestera_switchdev.h
> 
> -- 
> 2.17.1
>