[PATCH AUTOSEL 4.14 03/17] drivers/net/wan/lapbether: Added needed_tailroom

[PATCH AUTOSEL 4.14 03/17] drivers/net/wan/lapbether: Added needed_tailroom

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 1ee39c1448c4e0d480c5b390e2db1987561fb5c2 ]

The underlying Ethernet device may request necessary tailroom to be
allocated by setting needed_tailroom. This driver should also set
needed_tailroom to request the tailroom needed by the underlying
Ethernet device to be allocated.

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index c94dfa70f2a33..6b2553e893aca 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -343,6 +343,7 @@ static int lapbeth_new_device(struct net_device *dev)
 	 */
 	ndev->needed_headroom = -1 + 3 + 2 + dev->hard_header_len
 					   + dev->needed_headroom;
+	ndev->needed_tailroom = dev->needed_tailroom;
 
 	lapbeth = netdev_priv(ndev);
 	lapbeth->axdev = ndev;
-- 
2.25.1

[PATCH AUTOSEL 4.14 04/17] NFC: st95hf: Fix memleak in st95hf_in_send_cmd

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit f97c04c316d8fea16dca449fdfbe101fbdfee6a2 ]

When down_killable() fails, skb_resp should be freed
just like when st95hf_spi_send() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/st95hf/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c
index 01acb6e533655..c4b6e29c07192 100644
--- a/drivers/nfc/st95hf/core.c
+++ b/drivers/nfc/st95hf/core.c
@@ -981,7 +981,7 @@ static int st95hf_in_send_cmd(struct nfc_digital_dev *ddev,
 	rc = down_killable(&stcontext->exchange_lock);
 	if (rc) {
 		WARN(1, "Semaphore is not found up in st95hf_in_send_cmd\n");
-		return rc;
+		goto free_skb_resp;
 	}
 
 	rc = st95hf_spi_send(&stcontext->spicontext, skb->data,
-- 
2.25.1

[PATCH AUTOSEL 4.14 05/17] firestream: Fix memleak in fs_open

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 15ac5cdafb9202424206dc5bd376437a358963f9 ]

When make_rate() fails, vcc should be freed just
like other error paths in fs_open().

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/firestream.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 0e449ee11ac7f..e7cffd0cc3616 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1013,6 +1013,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
 				error = make_rate (pcr, r, &tmc0, NULL);
 				if (error) {
 					kfree(tc);
+					kfree(vcc);
 					return error;
 				}
 			}
-- 
2.25.1

[PATCH AUTOSEL 4.14 07/17] drivers/net/wan/lapbether: Set network_header before transmitting

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 91244d108441013b7367b3b4dcc6869998676473 ]

Set the skb's network_header before it is passed to the underlying
Ethernet device for transmission.

This patch fixes the following issue:

When we use this driver with AF_PACKET sockets, there would be error
messages of:
   protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.

This is because skbs passed down to the Ethernet device for transmission
don't have their network_header properly set, and the dev_queue_xmit_nit
function in net/core/dev.c complains about this.

Reason of setting the network_header to this place (at the end of the
Ethernet header, and at the beginning of the Ethernet payload):

Because when this driver receives an skb from the Ethernet device, the
network_header is also set at this place.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 6b2553e893aca..15177a54b17d7 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -213,6 +213,8 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
 
 	skb->dev = dev = lapbeth->ethdev;
 
+	skb_reset_network_header(skb);
+
 	dev_hard_header(skb, dev, ETH_P_DEC, bcast_addr, NULL, 0);
 
 	dev_queue_xmit(skb);
-- 
2.25.1

[PATCH AUTOSEL 4.14 08/17] cfg80211: regulatory: reject invalid hints

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 47caf685a6854593348f216e0b489b71c10cbe03 ]

Reject invalid hints early in order to not cause a kernel
WARN later if they're restored to or similar.

Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee
Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index b95d1c2bdef7e..9eb9d34cef7b1 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2408,6 +2408,9 @@ int regulatory_hint_user(const char *alpha2,
 	if (WARN_ON(!alpha2))
 		return -EINVAL;
 
+	if (!is_world_regdom(alpha2) && !is_an_alpha2(alpha2))
+		return -EINVAL;
+
 	request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
 	if (!request)
 		return -ENOMEM;
-- 
2.25.1

[PATCH AUTOSEL 4.14 09/17] net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()

[Sasha Levin]

From: Himadri Pandya <himadrispandya@gmail.com>

[ Upstream commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc ]

The buffer size is 2 Bytes and we expect to receive the same amount of
data. But sometimes we receive less data and run into uninit-was-stored
issue upon read. Hence modify the error check on the return value to match
with the buffer size as a prevention.

Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/asix_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index e9fcf6ef716a8..9bf18127e63a1 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -309,7 +309,7 @@ int asix_read_phy_addr(struct usbnet *dev, int internal)
 
 	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
 
-	if (ret < 0) {
+	if (ret < 2) {
 		netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
 		goto out;
 	}
-- 
2.25.1

[PATCH AUTOSEL 4.14 12/17] drivers/net/wan/hdlc_cisco: Add hard_header_len

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 1a545ebe380bf4c1433e3c136e35a77764fda5ad ]

This driver didn't set hard_header_len. This patch sets hard_header_len
for it according to its header_ops->create function.

This driver's header_ops->create function (cisco_hard_header) creates
a header of (struct hdlc_header), so hard_header_len should be set to
sizeof(struct hdlc_header).

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/hdlc_cisco.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index a408abc25512a..7f99fb666f196 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -377,6 +377,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		memcpy(&state(hdlc)->settings, &new_settings, size);
 		spin_lock_init(&state(hdlc)->lock);
 		dev->header_ops = &cisco_header_ops;
+		dev->hard_header_len = sizeof(struct hdlc_header);
 		dev->type = ARPHRD_CISCO;
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_on(dev);
-- 
2.25.1

[PATCH AUTOSEL 4.14 15/17] net: usb: dm9601: Add USB ID of Keenetic Plus DSL

[Sasha Levin]

From: Kamil Lorenc <kamil@re-ws.pl>

[ Upstream commit a609d0259183a841621f252e067f40f8cc25d6f6 ]

Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface.

Signed-off-by: Kamil Lorenc <kamil@re-ws.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/dm9601.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index b91f92e4e5f22..915ac75b55fc7 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -625,6 +625,10 @@ static const struct usb_device_id products[] = {
 	 USB_DEVICE(0x0a46, 0x1269),	/* DM9621A USB to Fast Ethernet Adapter */
 	 .driver_info = (unsigned long)&dm9601_info,
 	},
+	{
+	 USB_DEVICE(0x0586, 0x3427),	/* ZyXEL Keenetic Plus DSL xDSL modem */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
 	{},			// END
 };
 
-- 
2.25.1