Netdev List
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net-next] net: dsa: b53: Report VLAN table occupancy via devlink
Date: Tue,  8 Sep 2020 21:32:34 -0700	[thread overview]
Message-ID: <20200909043235.4080900-1-f.fainelli@gmail.com> (raw)

We already maintain an array of VLANs used by the switch so we can
simply iterate over it to report the occupancy via devlink.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 59 ++++++++++++++++++++++++++++++--
 drivers/net/dsa/b53/b53_priv.h   |  1 +
 drivers/net/dsa/bcm_sf2.c        |  8 ++++-
 3 files changed, 65 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 26fcff85d881..a1527665e817 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -977,6 +977,53 @@ int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
 }
 EXPORT_SYMBOL(b53_get_sset_count);
 
+enum b53_devlink_resource_id {
+	B53_DEVLINK_PARMA_ID_VLAN_TABLE,
+};
+
+static u64 b53_devlink_vlan_table_get(void *priv)
+{
+	struct b53_device *dev = priv;
+	unsigned int i, count = 0;
+	struct b53_vlan *vl;
+
+	for (i = 0; i < dev->num_vlans; i++) {
+		vl = &dev->vlans[i];
+		if (vl->members)
+			count++;
+	}
+
+	return count;
+}
+
+int b53_setup_devlink_resources(struct dsa_switch *ds)
+{
+	struct devlink_resource_size_params size_params;
+	struct b53_device *dev = ds->priv;
+	int err;
+
+	devlink_resource_size_params_init(&size_params, dev->num_vlans,
+					  dev->num_vlans,
+					  1, DEVLINK_RESOURCE_UNIT_ENTRY);
+
+	err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
+					    B53_DEVLINK_PARMA_ID_VLAN_TABLE,
+					    DEVLINK_RESOURCE_ID_PARENT_TOP,
+					    &size_params);
+	if (err)
+		goto out;
+
+	dsa_devlink_resource_occ_get_register(ds,
+					      B53_DEVLINK_PARMA_ID_VLAN_TABLE,
+					      b53_devlink_vlan_table_get, dev);
+
+	return 0;
+out:
+	dsa_devlink_resources_unregister(ds);
+	return err;
+}
+EXPORT_SYMBOL(b53_setup_devlink_resources);
+
 static int b53_setup(struct dsa_switch *ds)
 {
 	struct b53_device *dev = ds->priv;
@@ -992,8 +1039,10 @@ static int b53_setup(struct dsa_switch *ds)
 	b53_reset_mib(dev);
 
 	ret = b53_apply_config(dev);
-	if (ret)
+	if (ret) {
 		dev_err(ds->dev, "failed to apply configuration\n");
+		return ret;
+	}
 
 	/* Configure IMP/CPU port, disable all other ports. Enabled
 	 * ports will be configured with .port_enable
@@ -1012,7 +1061,12 @@ static int b53_setup(struct dsa_switch *ds)
 	 */
 	ds->vlan_filtering_is_global = true;
 
-	return ret;
+	return b53_setup_devlink_resources(ds);
+}
+
+static void b53_teardown(struct dsa_switch *ds)
+{
+	dsa_devlink_resources_unregister(ds);
 }
 
 static void b53_force_link(struct b53_device *dev, int port, int link)
@@ -2141,6 +2195,7 @@ static int b53_get_max_mtu(struct dsa_switch *ds, int port)
 static const struct dsa_switch_ops b53_switch_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= b53_setup,
+	.teardown		= b53_teardown,
 	.get_strings		= b53_get_strings,
 	.get_ethtool_stats	= b53_get_ethtool_stats,
 	.get_sset_count		= b53_get_sset_count,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index e942c60e4365..c55c0a9f1b47 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -328,6 +328,7 @@ void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state);
 void b53_br_fast_age(struct dsa_switch *ds, int port);
 int b53_br_egress_floods(struct dsa_switch *ds, int port,
 			 bool unicast, bool multicast);
+int b53_setup_devlink_resources(struct dsa_switch *ds);
 void b53_port_event(struct dsa_switch *ds, int port);
 void b53_phylink_validate(struct dsa_switch *ds, int port,
 			  unsigned long *supported,
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 3263e8a0ae67..723820603107 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -936,7 +936,12 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 	b53_configure_vlan(ds);
 	bcm_sf2_enable_acb(ds);
 
-	return 0;
+	return b53_setup_devlink_resources(ds);
+}
+
+static void bcm_sf2_sw_teardown(struct dsa_switch *ds)
+{
+	dsa_devlink_resources_unregister(ds);
 }
 
 /* The SWITCH_CORE register space is managed by b53 but operates on a page +
@@ -1073,6 +1078,7 @@ static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds, int port,
 static const struct dsa_switch_ops bcm_sf2_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= bcm_sf2_sw_setup,
+	.teardown		= bcm_sf2_sw_teardown,
 	.get_strings		= bcm_sf2_sw_get_strings,
 	.get_ethtool_stats	= bcm_sf2_sw_get_ethtool_stats,
 	.get_sset_count		= bcm_sf2_sw_get_sset_count,
-- 
2.25.1


             reply	other threads:[~2020-09-09  4:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-09  4:32 Florian Fainelli [this message]
2020-09-09 15:54 ` [PATCH net-next] net: dsa: b53: Report VLAN table occupancy via devlink Jakub Kicinski
2020-09-09 16:03 ` Vladimir Oltean
2020-09-09 17:53   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200909043235.4080900-1-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox