From: Jacob Keller <jacob.e.keller@intel.com>
To: netdev@vger.kernel.org
Cc: Jacob Keller <jacob.e.keller@intel.com>
Subject: [iproute2-next v4 2/2] devlink: support setting the overwrite mask
Date: Wed, 9 Sep 2020 15:28:42 -0700 [thread overview]
Message-ID: <20200909222842.33952-3-jacob.e.keller@intel.com> (raw)
In-Reply-To: <20200909222842.33952-1-jacob.e.keller@intel.com>
Add support for specifying the overwrite sections to allow in the flash
update command. This is done by adding a new "overwrite" option which
can take either "settings" or "identifiers" passing the overwrite mode
multiple times will combine the fields using bitwise-OR.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
devlink/devlink.c | 48 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 46 insertions(+), 2 deletions(-)
diff --git a/devlink/devlink.c b/devlink/devlink.c
index 007677a5c564..cafac9ca7acd 100644
--- a/devlink/devlink.c
+++ b/devlink/devlink.c
@@ -302,6 +302,7 @@ static void ifname_map_free(struct ifname_map *ifname_map)
#define DL_OPT_TRAP_POLICER_BURST BIT(36)
#define DL_OPT_HEALTH_REPORTER_AUTO_DUMP BIT(37)
#define DL_OPT_PORT_FUNCTION_HW_ADDR BIT(38)
+#define DL_OPT_FLASH_OVERWRITE BIT(39)
struct dl_opts {
uint64_t present; /* flags of present items */
@@ -349,6 +350,7 @@ struct dl_opts {
uint64_t trap_policer_burst;
char port_function_hw_addr[MAX_ADDR_LEN];
uint32_t port_function_hw_addr_len;
+ uint32_t overwrite_mask;
};
struct dl {
@@ -1285,6 +1287,19 @@ eswitch_encap_mode_get(const char *typestr,
return 0;
}
+static int flash_overwrite_section_get(const char *sectionstr, uint32_t *mask)
+{
+ if (strcmp(sectionstr, "settings") == 0) {
+ *mask |= DEVLINK_FLASH_OVERWRITE_SETTINGS;
+ } else if (strcmp(sectionstr, "identifiers") == 0) {
+ *mask |= DEVLINK_FLASH_OVERWRITE_IDENTIFIERS;
+ } else {
+ pr_err("Unknown overwrite section \"%s\"\n", sectionstr);
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int param_cmode_get(const char *cmodestr,
enum devlink_param_cmode *cmode)
{
@@ -1627,6 +1642,21 @@ static int dl_argv_parse(struct dl *dl, uint64_t o_required,
if (err)
return err;
o_found |= DL_OPT_FLASH_COMPONENT;
+
+ } else if (dl_argv_match(dl, "overwrite") &&
+ (o_all & DL_OPT_FLASH_OVERWRITE)) {
+ const char *sectionstr;
+
+ dl_arg_inc(dl);
+ err = dl_argv_str(dl, §ionstr);
+ if(err)
+ return err;
+ err = flash_overwrite_section_get(sectionstr,
+ &opts->overwrite_mask);
+ if (err)
+ return err;
+ o_found |= DL_OPT_FLASH_OVERWRITE;
+
} else if (dl_argv_match(dl, "reporter") &&
(o_all & DL_OPT_HEALTH_REPORTER_NAME)) {
dl_arg_inc(dl);
@@ -1767,6 +1797,18 @@ dl_function_attr_put(struct nlmsghdr *nlh, const struct dl_opts *opts)
mnl_attr_nest_end(nlh, nest);
}
+static void
+dl_flash_update_overwrite_put(struct nlmsghdr *nlh, const struct dl_opts *opts)
+{
+ struct nla_bitfield32 overwrite_mask;
+
+ overwrite_mask.selector = DEVLINK_SUPPORTED_FLASH_OVERWRITE_SECTIONS;
+ overwrite_mask.value = opts->overwrite_mask;
+
+ mnl_attr_put(nlh, DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK,
+ sizeof(overwrite_mask), &overwrite_mask);
+}
+
static void dl_opts_put(struct nlmsghdr *nlh, struct dl *dl)
{
struct dl_opts *opts = &dl->opts;
@@ -1854,6 +1896,8 @@ static void dl_opts_put(struct nlmsghdr *nlh, struct dl *dl)
if (opts->present & DL_OPT_FLASH_COMPONENT)
mnl_attr_put_strz(nlh, DEVLINK_ATTR_FLASH_UPDATE_COMPONENT,
opts->flash_component);
+ if (opts->present & DL_OPT_FLASH_OVERWRITE)
+ dl_flash_update_overwrite_put(nlh, opts);
if (opts->present & DL_OPT_HEALTH_REPORTER_NAME)
mnl_attr_put_strz(nlh, DEVLINK_ATTR_HEALTH_REPORTER_NAME,
opts->reporter_name);
@@ -1954,7 +1998,7 @@ static void cmd_dev_help(void)
pr_err(" devlink dev param show [DEV name PARAMETER]\n");
pr_err(" devlink dev reload DEV [ netns { PID | NAME | ID } ]\n");
pr_err(" devlink dev info [ DEV ]\n");
- pr_err(" devlink dev flash DEV file PATH [ component NAME ]\n");
+ pr_err(" devlink dev flash DEV file PATH [ component NAME ] [ overwrite SECTION ]\n");
}
static bool cmp_arr_last_handle(struct dl *dl, const char *bus_name,
@@ -3219,7 +3263,7 @@ static int cmd_dev_flash(struct dl *dl)
NLM_F_REQUEST | NLM_F_ACK);
err = dl_argv_parse_put(nlh, dl, DL_OPT_HANDLE | DL_OPT_FLASH_FILE_NAME,
- DL_OPT_FLASH_COMPONENT);
+ DL_OPT_FLASH_COMPONENT | DL_OPT_FLASH_OVERWRITE);
if (err)
return err;
--
2.28.0.218.ge27853923b9d.dirty
next prev parent reply other threads:[~2020-09-09 22:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-09 22:28 [iproute2-next v4 0/2] devlink: add flash update overwrite mask Jacob Keller
2020-09-09 22:28 ` [iproute2-next v4 1/2] Update devlink header for overwrite mask attribute Jacob Keller
2020-09-09 22:28 ` Jacob Keller [this message]
2020-09-29 15:33 ` [iproute2-next v4 0/2] devlink: add flash update overwrite mask David Ahern
2020-09-29 18:00 ` Jacob Keller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200909222842.33952-3-jacob.e.keller@intel.com \
--to=jacob.e.keller@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).