From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Vladimir Oltean <olteanv@gmail.com>
Cc: davem@davemloft.net, netdev@vger.kernel.org, yangbo.lu@nxp.com,
xiaoliang.yang_1@nxp.com, UNGLinuxDriver@microchip.com,
claudiu.manoil@nxp.com, andrew@lunn.ch, vivien.didelot@gmail.com,
f.fainelli@gmail.com, kuba@kernel.org
Subject: Re: [PATCH net 2/7] net: mscc: ocelot: add locking for the port TX timestamp ID
Date: Wed, 16 Sep 2020 13:12:04 +0200 [thread overview]
Message-ID: <20200916111204.GJ9675@piout.net> (raw)
In-Reply-To: <20200915182229.69529-3-olteanv@gmail.com>
On 15/09/2020 21:22:24+0300, Vladimir Oltean wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
>
> The ocelot_port->ts_id is used to:
> - populate skb->cb[0] for matching the TX timestamp in the PTP IRQ with
> an skb.
> - populate the REW_OP from the injection header of the ongoing skb.
> Only then is ocelot_port->ts_id incremented.
>
> This is a problem because, at least theoretically, another timestampable
> skb might use the same ocelot_port->ts_id before that is incremented. So
> the logic of using and incrementing the timestamp id should be atomic
> per port.
>
> The solution is to use the global ocelot_port->ts_id only while
> protected by the associated ocelot_port->ts_id_lock. That's where we
> populate skb->cb[0]. Note that for ocelot,
> ocelot_port_add_txtstamp_skb() is called for the actual skb, but for
> felix, it is called for the skb's clone. That is something which will
> also be changed.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
> drivers/net/ethernet/mscc/ocelot.c | 13 ++++++++++++-
> drivers/net/ethernet/mscc/ocelot_net.c | 6 ++----
> include/soc/mscc/ocelot.h | 1 +
> net/dsa/tag_ocelot.c | 11 +++++++----
> 4 files changed, 22 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> index 5abb7d2b0a9e..8caf3afd464d 100644
> --- a/drivers/net/ethernet/mscc/ocelot.c
> +++ b/drivers/net/ethernet/mscc/ocelot.c
> @@ -421,10 +421,15 @@ int ocelot_port_add_txtstamp_skb(struct ocelot_port *ocelot_port,
>
> if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP &&
> ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
> + spin_lock(&ocelot_port->ts_id_lock);
> +
> shinfo->tx_flags |= SKBTX_IN_PROGRESS;
> /* Store timestamp ID in cb[0] of sk_buff */
> - skb->cb[0] = ocelot_port->ts_id % 4;
> + skb->cb[0] = ocelot_port->ts_id;
> + ocelot_port->ts_id = (ocelot_port->ts_id + 1) % 4;
> skb_queue_tail(&ocelot_port->tx_skbs, skb);
> +
> + spin_unlock(&ocelot_port->ts_id_lock);
> return 0;
> }
> return -ENODATA;
> @@ -1443,6 +1448,12 @@ int ocelot_init(struct ocelot *ocelot)
> if (!ocelot->stats_queue)
> return -ENOMEM;
>
> + for (port = 0; port < ocelot->num_phys_ports; port++) {
> + struct ocelot_port *ocelot_port = ocelot->ports[port];
> +
At this point, ocelot_port is NULL because ocelot_init is called before
the port structures are allocated in mscc_ocelot_probe
> + spin_lock_init(&ocelot_port->ts_id_lock);
> + }
> +
> INIT_LIST_HEAD(&ocelot->multicast);
> ocelot_mact_init(ocelot);
> ocelot_vlan_init(ocelot);
> diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c
> index cacabc23215a..8490e42e9e2d 100644
> --- a/drivers/net/ethernet/mscc/ocelot_net.c
> +++ b/drivers/net/ethernet/mscc/ocelot_net.c
> @@ -349,10 +349,8 @@ static int ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev)
>
> if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP) {
> info.rew_op = ocelot_port->ptp_cmd;
> - if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
> - info.rew_op |= (ocelot_port->ts_id % 4) << 3;
> - ocelot_port->ts_id++;
> - }
> + if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP)
> + info.rew_op |= skb->cb[0] << 3;
> }
>
> ocelot_gen_ifh(ifh, &info);
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index da369b12005f..4521dd602ddc 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -566,6 +566,7 @@ struct ocelot_port {
> u8 ptp_cmd;
> struct sk_buff_head tx_skbs;
> u8 ts_id;
> + spinlock_t ts_id_lock;
>
> phy_interface_t phy_mode;
>
> diff --git a/net/dsa/tag_ocelot.c b/net/dsa/tag_ocelot.c
> index 42f327c06dca..b4fc05cafaa6 100644
> --- a/net/dsa/tag_ocelot.c
> +++ b/net/dsa/tag_ocelot.c
> @@ -160,11 +160,14 @@ static struct sk_buff *ocelot_xmit(struct sk_buff *skb,
> packing(injection, &qos_class, 19, 17, OCELOT_TAG_LEN, PACK, 0);
>
> if (ocelot->ptp && (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
> + struct sk_buff *clone = DSA_SKB_CB(skb)->clone;
> +
> rew_op = ocelot_port->ptp_cmd;
> - if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
> - rew_op |= (ocelot_port->ts_id % 4) << 3;
> - ocelot_port->ts_id++;
> - }
> + /* Retrieve timestamp ID populated inside skb->cb[0] of the
> + * clone by ocelot_port_add_txtstamp_skb
> + */
> + if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP)
> + rew_op |= clone->cb[0] << 3;
>
> packing(injection, &rew_op, 125, 117, OCELOT_TAG_LEN, PACK, 0);
> }
> --
> 2.25.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2020-09-16 19:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-15 18:22 [PATCH net 0/7] Bugfixes in Microsemi Ocelot switch driver Vladimir Oltean
2020-09-15 18:22 ` [PATCH net 1/7] net: mscc: ocelot: fix race condition with TX timestamping Vladimir Oltean
2020-09-15 18:22 ` [PATCH net 2/7] net: mscc: ocelot: add locking for the port TX timestamp ID Vladimir Oltean
2020-09-16 11:12 ` Alexandre Belloni [this message]
2020-09-16 12:25 ` Vladimir Oltean
2020-09-17 0:19 ` David Miller
2020-09-17 23:43 ` Vladimir Oltean
2020-09-17 23:57 ` David Miller
2020-09-15 18:22 ` [PATCH net 3/7] net: dsa: seville: fix buffer size of the queue system Vladimir Oltean
2020-09-15 18:22 ` [PATCH net 4/7] net: mscc: ocelot: check for errors on memory allocation of ports Vladimir Oltean
2020-09-17 0:21 ` David Miller
2020-09-15 18:22 ` [PATCH net 5/7] net: mscc: ocelot: error checking when calling ocelot_init() Vladimir Oltean
2020-09-17 0:24 ` David Miller
2020-09-15 18:22 ` [PATCH net 6/7] net: mscc: ocelot: refactor ports parsing code into a dedicated function Vladimir Oltean
2020-09-15 18:22 ` [PATCH net 7/7] net: mscc: ocelot: unregister net devices on unbind Vladimir Oltean
2020-09-15 21:19 ` [PATCH net 0/7] Bugfixes in Microsemi Ocelot switch driver Horatiu Vultur
2020-09-16 9:56 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200916111204.GJ9675@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
--cc=xiaoliang.yang_1@nxp.com \
--cc=yangbo.lu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).