netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Vladimir Oltean <olteanv@gmail.com>
Cc: davem@davemloft.net, netdev@vger.kernel.org, yangbo.lu@nxp.com,
	xiaoliang.yang_1@nxp.com, UNGLinuxDriver@microchip.com,
	claudiu.manoil@nxp.com, andrew@lunn.ch, vivien.didelot@gmail.com,
	f.fainelli@gmail.com, kuba@kernel.org
Subject: Re: [PATCH v2 net 2/8] net: mscc: ocelot: add locking for the port TX timestamp ID
Date: Fri, 18 Sep 2020 17:27:25 +0200	[thread overview]
Message-ID: <20200918152725.GY9675@piout.net> (raw)
In-Reply-To: <20200918010730.2911234-3-olteanv@gmail.com>

On 18/09/2020 04:07:24+0300, Vladimir Oltean wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> 
> The ocelot_port->ts_id is used to:
> (a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ
>     with an skb.
> (b) populate the REW_OP from the injection header of the ongoing skb.
> Only then is ocelot_port->ts_id incremented.
> 
> This is a problem because, at least theoretically, another timestampable
> skb might use the same ocelot_port->ts_id before that is incremented.
> Normally all transmit calls are serialized by the netdev transmit
> spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also
> called by DSA, which has started declaring the NETIF_F_LLTX feature
> since commit 2b86cb829976 ("net: dsa: declare lockless TX feature for
> slave ports").  So the logic of using and incrementing the timestamp id
> should be atomic per port.
> 
> The solution is to use the global ocelot_port->ts_id only while
> protected by the associated ocelot_port->ts_id_lock. That's where we
> populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb
> is called for the actual skb, but for felix, it is called for the skb's
> clone. That is something which will also be changed in the future.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>

Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> Changes in v2:
> Added an extra explanation about NETIF_F_LLTX in commit message.
> 
>  drivers/net/ethernet/mscc/ocelot.c     |  8 +++++++-
>  drivers/net/ethernet/mscc/ocelot_net.c |  6 ++----
>  include/soc/mscc/ocelot.h              |  1 +
>  net/dsa/tag_ocelot.c                   | 11 +++++++----
>  4 files changed, 17 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> index 5abb7d2b0a9e..83eb7c325061 100644
> --- a/drivers/net/ethernet/mscc/ocelot.c
> +++ b/drivers/net/ethernet/mscc/ocelot.c
> @@ -421,10 +421,15 @@ int ocelot_port_add_txtstamp_skb(struct ocelot_port *ocelot_port,
>  
>  	if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP &&
>  	    ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
> +		spin_lock(&ocelot_port->ts_id_lock);
> +
>  		shinfo->tx_flags |= SKBTX_IN_PROGRESS;
>  		/* Store timestamp ID in cb[0] of sk_buff */
> -		skb->cb[0] = ocelot_port->ts_id % 4;
> +		skb->cb[0] = ocelot_port->ts_id;
> +		ocelot_port->ts_id = (ocelot_port->ts_id + 1) % 4;
>  		skb_queue_tail(&ocelot_port->tx_skbs, skb);
> +
> +		spin_unlock(&ocelot_port->ts_id_lock);
>  		return 0;
>  	}
>  	return -ENODATA;
> @@ -1300,6 +1305,7 @@ void ocelot_init_port(struct ocelot *ocelot, int port)
>  	struct ocelot_port *ocelot_port = ocelot->ports[port];
>  
>  	skb_queue_head_init(&ocelot_port->tx_skbs);
> +	spin_lock_init(&ocelot_port->ts_id_lock);
>  
>  	/* Basic L2 initialization */
>  
> diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c
> index cacabc23215a..8490e42e9e2d 100644
> --- a/drivers/net/ethernet/mscc/ocelot_net.c
> +++ b/drivers/net/ethernet/mscc/ocelot_net.c
> @@ -349,10 +349,8 @@ static int ocelot_port_xmit(struct sk_buff *skb, struct net_device *dev)
>  
>  	if (ocelot->ptp && shinfo->tx_flags & SKBTX_HW_TSTAMP) {
>  		info.rew_op = ocelot_port->ptp_cmd;
> -		if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
> -			info.rew_op |= (ocelot_port->ts_id  % 4) << 3;
> -			ocelot_port->ts_id++;
> -		}
> +		if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP)
> +			info.rew_op |= skb->cb[0] << 3;
>  	}
>  
>  	ocelot_gen_ifh(ifh, &info);
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index da369b12005f..4521dd602ddc 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -566,6 +566,7 @@ struct ocelot_port {
>  	u8				ptp_cmd;
>  	struct sk_buff_head		tx_skbs;
>  	u8				ts_id;
> +	spinlock_t			ts_id_lock;
>  
>  	phy_interface_t			phy_mode;
>  
> diff --git a/net/dsa/tag_ocelot.c b/net/dsa/tag_ocelot.c
> index 42f327c06dca..b4fc05cafaa6 100644
> --- a/net/dsa/tag_ocelot.c
> +++ b/net/dsa/tag_ocelot.c
> @@ -160,11 +160,14 @@ static struct sk_buff *ocelot_xmit(struct sk_buff *skb,
>  	packing(injection, &qos_class, 19,  17, OCELOT_TAG_LEN, PACK, 0);
>  
>  	if (ocelot->ptp && (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
> +		struct sk_buff *clone = DSA_SKB_CB(skb)->clone;
> +
>  		rew_op = ocelot_port->ptp_cmd;
> -		if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
> -			rew_op |= (ocelot_port->ts_id  % 4) << 3;
> -			ocelot_port->ts_id++;
> -		}
> +		/* Retrieve timestamp ID populated inside skb->cb[0] of the
> +		 * clone by ocelot_port_add_txtstamp_skb
> +		 */
> +		if (ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP)
> +			rew_op |= clone->cb[0] << 3;
>  
>  		packing(injection, &rew_op, 125, 117, OCELOT_TAG_LEN, PACK, 0);
>  	}
> -- 
> 2.25.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

  parent reply	other threads:[~2020-09-18 16:16 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-18  1:07 [PATCH v2 net 0/8] Bugfixes in Microsemi Ocelot switch driver Vladimir Oltean
2020-09-18  1:07 ` [PATCH v2 net 1/8] net: mscc: ocelot: fix race condition with TX timestamping Vladimir Oltean
2020-09-18 15:23   ` Alexandre Belloni
2020-09-18 15:24   ` Alexandre Belloni
2020-09-18 15:24   ` Alexandre Belloni
2020-09-18 15:24   ` Alexandre Belloni
2020-09-18 15:24   ` Alexandre Belloni
2020-09-18 15:25   ` Alexandre Belloni
2020-09-18 15:25   ` Alexandre Belloni
2020-09-18 15:26   ` Alexandre Belloni
2020-09-18 15:27     ` Alexandre Belloni
2020-09-18  1:07 ` [PATCH v2 net 2/8] net: mscc: ocelot: add locking for the port TX timestamp ID Vladimir Oltean
2020-09-18  2:37   ` Florian Fainelli
2020-09-18 15:27   ` Alexandre Belloni [this message]
2020-09-18  1:07 ` [PATCH v2 net 3/8] net: dsa: seville: fix buffer size of the queue system Vladimir Oltean
2020-09-18  2:37   ` Florian Fainelli
2020-09-18 15:27   ` Alexandre Belloni
2020-09-18  1:07 ` [PATCH v2 net 4/8] net: mscc: ocelot: check for errors on memory allocation of ports Vladimir Oltean
2020-09-18  2:35   ` Florian Fainelli
2020-09-18 15:27   ` Alexandre Belloni
2020-09-18  1:07 ` [PATCH v2 net 5/8] net: mscc: ocelot: error checking when calling ocelot_init() Vladimir Oltean
2020-09-18  2:35   ` Florian Fainelli
2020-09-18 15:28   ` Alexandre Belloni
2020-09-18  1:07 ` [PATCH v2 net 6/8] net: mscc: ocelot: refactor ports parsing code into a dedicated function Vladimir Oltean
2020-09-18  2:34   ` Florian Fainelli
2020-09-18 15:28   ` Alexandre Belloni
2020-09-18  1:07 ` [PATCH v2 net 7/8] net: mscc: ocelot: unregister net devices on unbind Vladimir Oltean
2020-09-18  2:34   ` Florian Fainelli
2020-09-18 15:28   ` Alexandre Belloni
2020-09-18  1:07 ` [PATCH v2 net 8/8] net: mscc: ocelot: deinitialize only initialized ports Vladimir Oltean
2020-09-18  2:36   ` Florian Fainelli
2020-09-18 15:29   ` Alexandre Belloni
2020-09-18 20:52 ` [PATCH v2 net 0/8] Bugfixes in Microsemi Ocelot switch driver David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200918152725.GY9675@piout.net \
    --to=alexandre.belloni@bootlin.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    --cc=xiaoliang.yang_1@nxp.com \
    --cc=yangbo.lu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).