netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: saeed@kernel.org
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, Saeed Mahameed <saeedm@nvidia.com>,
	YueHaibing <yuehaibing@huawei.com>,
	Tariq Toukan <tariqt@nvidia.com>
Subject: [net V2 14/15] net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
Date: Mon, 21 Sep 2020 17:31:00 -0700	[thread overview]
Message-ID: <20200922003101.529117-15-saeed@kernel.org> (raw)
In-Reply-To: <20200922003101.529117-1-saeed@kernel.org>

From: Saeed Mahameed <saeedm@nvidia.com>

The spinlock only needed when accessing the channel's icosq, grab the lock
after the buf allocation in resync_post_get_progress_params() to avoid
kzalloc(GFP_KERNEL) in atomic context.

Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support")
Reported-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
---
 .../mellanox/mlx5/core/en_accel/ktls_rx.c     | 25 ++++++++-----------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c
index e85411bd1fed..6bbfcf18107d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c
@@ -234,7 +234,7 @@ mlx5e_get_ktls_rx_priv_ctx(struct tls_context *tls_ctx)
 
 /* Re-sync */
 /* Runs in work context */
-static struct mlx5_wqe_ctrl_seg *
+static int
 resync_post_get_progress_params(struct mlx5e_icosq *sq,
 				struct mlx5e_ktls_offload_context_rx *priv_rx)
 {
@@ -264,7 +264,11 @@ resync_post_get_progress_params(struct mlx5e_icosq *sq,
 	buf->priv_rx = priv_rx;
 
 	BUILD_BUG_ON(MLX5E_KTLS_GET_PROGRESS_WQEBBS != 1);
+
+	spin_lock(&sq->channel->async_icosq_lock);
+
 	if (unlikely(!mlx5e_wqc_has_room_for(&sq->wq, sq->cc, sq->pc, 1))) {
+		spin_unlock(&sq->channel->async_icosq_lock);
 		err = -ENOSPC;
 		goto err_dma_unmap;
 	}
@@ -294,8 +298,10 @@ resync_post_get_progress_params(struct mlx5e_icosq *sq,
 	};
 	icosq_fill_wi(sq, pi, &wi);
 	sq->pc++;
+	mlx5e_notify_hw(&sq->wq, sq->pc, sq->uar_map, cseg);
+	spin_unlock(&sq->channel->async_icosq_lock);
 
-	return cseg;
+	return 0;
 
 err_dma_unmap:
 	dma_unmap_single(pdev, buf->dma_addr, PROGRESS_PARAMS_PADDED_SIZE, DMA_FROM_DEVICE);
@@ -303,7 +309,7 @@ resync_post_get_progress_params(struct mlx5e_icosq *sq,
 	kfree(buf);
 err_out:
 	priv_rx->stats->tls_resync_req_skip++;
-	return ERR_PTR(err);
+	return err;
 }
 
 /* Function is called with elevated refcount.
@@ -313,10 +319,8 @@ static void resync_handle_work(struct work_struct *work)
 {
 	struct mlx5e_ktls_offload_context_rx *priv_rx;
 	struct mlx5e_ktls_rx_resync_ctx *resync;
-	struct mlx5_wqe_ctrl_seg *cseg;
 	struct mlx5e_channel *c;
 	struct mlx5e_icosq *sq;
-	struct mlx5_wq_cyc *wq;
 
 	resync = container_of(work, struct mlx5e_ktls_rx_resync_ctx, work);
 	priv_rx = container_of(resync, struct mlx5e_ktls_offload_context_rx, resync);
@@ -328,18 +332,9 @@ static void resync_handle_work(struct work_struct *work)
 
 	c = resync->priv->channels.c[priv_rx->rxq];
 	sq = &c->async_icosq;
-	wq = &sq->wq;
 
-	spin_lock(&c->async_icosq_lock);
-
-	cseg = resync_post_get_progress_params(sq, priv_rx);
-	if (IS_ERR(cseg)) {
+	if (resync_post_get_progress_params(sq, priv_rx))
 		refcount_dec(&resync->refcnt);
-		goto unlock;
-	}
-	mlx5e_notify_hw(wq, sq->pc, sq->uar_map, cseg);
-unlock:
-	spin_unlock(&c->async_icosq_lock);
 }
 
 static void resync_init(struct mlx5e_ktls_rx_resync_ctx *resync,
-- 
2.26.2


  parent reply	other threads:[~2020-09-22  0:31 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-22  0:30 [pull request][net V2 00/15] mlx5 fixes-2020-09-18 saeed
2020-09-22  0:30 ` [net V2 01/15] net/mlx5: Fix FTE cleanup saeed
2020-09-22  0:30 ` [net V2 02/15] net/mlx5e: Use RCU to protect rq->xdp_prog saeed
2020-09-22  0:30 ` [net V2 03/15] net/mlx5e: Use synchronize_rcu to sync with NAPI saeed
2020-09-22  0:30 ` [net V2 04/15] net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready saeed
2020-09-22  0:30 ` [net V2 05/15] net/mlx5e: CT: Fix freeing ct_label mapping saeed
2020-09-22  0:30 ` [net V2 06/15] net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported saeed
2020-09-22  0:30 ` [net V2 07/15] net/mlx5e: Fix endianness when calculating pedit mask first bit saeed
2020-09-22  0:30 ` [net V2 08/15] net/mlx5e: Fix multicast counter not up-to-date in "ip -s" saeed
2020-09-22  0:30 ` [net V2 09/15] net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats() saeed
2020-09-22  0:30 ` [net V2 10/15] net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported saeed
2020-09-22  0:30 ` [net V2 11/15] net/mlx5e: kTLS, Fix napi sync and possible use-after-free saeed
2020-09-22  0:30 ` [net V2 12/15] net/mlx5e: kTLS, Add missing dma_unmap in RX resync saeed
2020-09-22  0:30 ` [net V2 13/15] net/mlx5e: kTLS, Fix leak on resync error flow saeed
2020-09-22  0:31 ` saeed [this message]
2020-09-22  0:31 ` [net V2 15/15] net/mlx5e: mlx5e_fec_in_caps() returns a boolean saeed
2020-09-22  0:36 ` [pull request][net V2 00/15] mlx5 fixes-2020-09-18 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200922003101.529117-15-saeed@kernel.org \
    --to=saeed@kernel.org \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=saeedm@nvidia.com \
    --cc=tariqt@nvidia.com \
    --cc=yuehaibing@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).