From: saeed@kernel.org
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, Maor Gottlieb <maorg@nvidia.com>,
Eran Ben Elisha <eranbe@nvidia.com>,
Saeed Mahameed <saeedm@nvidia.com>
Subject: [net 07/15] net/mlx5: Fix request_irqs error flow
Date: Wed, 30 Sep 2020 19:05:08 -0700 [thread overview]
Message-ID: <20201001020516.41217-8-saeed@kernel.org> (raw)
In-Reply-To: <20201001020516.41217-1-saeed@kernel.org>
From: Maor Gottlieb <maorg@nvidia.com>
Fix error flow handling in request_irqs which try to free irq
that we failed to request.
It fixes the below trace.
WARNING: CPU: 1 PID: 7587 at kernel/irq/manage.c:1684 free_irq+0x4d/0x60
CPU: 1 PID: 7587 Comm: bash Tainted: G W OE 4.15.15-1.el7MELLANOXsmp-x86_64 #1
Hardware name: Advantech SKY-6200/SKY-6200, BIOS F2.00 08/06/2020
RIP: 0010:free_irq+0x4d/0x60
RSP: 0018:ffffc9000ef47af0 EFLAGS: 00010282
RAX: ffff88001476ae00 RBX: 0000000000000655 RCX: 0000000000000000
RDX: ffff88001476ae00 RSI: ffffc9000ef47ab8 RDI: ffff8800398bb478
RBP: ffff88001476a838 R08: ffff88001476ae00 R09: 000000000000156d
R10: 0000000000000000 R11: 0000000000000004 R12: ffff88001476a838
R13: 0000000000000006 R14: ffff88001476a888 R15: 00000000ffffffe4
FS: 00007efeadd32740(0000) GS:ffff88047fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc9cc010008 CR3: 00000001a2380004 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
mlx5_irq_table_create+0x38d/0x400 [mlx5_core]
? atomic_notifier_chain_register+0x50/0x60
mlx5_load_one+0x7ee/0x1130 [mlx5_core]
init_one+0x4c9/0x650 [mlx5_core]
pci_device_probe+0xb8/0x120
driver_probe_device+0x2a1/0x470
? driver_allows_async_probing+0x30/0x30
bus_for_each_drv+0x54/0x80
__device_attach+0xa3/0x100
pci_bus_add_device+0x4a/0x90
pci_iov_add_virtfn+0x2dc/0x2f0
pci_enable_sriov+0x32e/0x420
mlx5_core_sriov_configure+0x61/0x1b0 [mlx5_core]
? kstrtoll+0x22/0x70
num_vf_store+0x4b/0x70 [mlx5_core]
kernfs_fop_write+0x102/0x180
__vfs_write+0x26/0x140
? rcu_all_qs+0x5/0x80
? _cond_resched+0x15/0x30
? __sb_start_write+0x41/0x80
vfs_write+0xad/0x1a0
SyS_write+0x42/0x90
do_syscall_64+0x60/0x110
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: 24163189da48 ("net/mlx5: Separate IRQ request/free from EQ life cycle")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
index 373981a659c7..ef26a0a6f890 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
@@ -115,7 +115,7 @@ static int request_irqs(struct mlx5_core_dev *dev, int nvec)
return 0;
err_request_irq:
- for (; i >= 0; i--) {
+ for (--i; i >= 0; i--) {
struct mlx5_irq *irq = mlx5_irq_get(dev, i);
int irqn = pci_irq_vector(dev->pdev, i);
--
2.26.2
next prev parent reply other threads:[~2020-10-01 2:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 2:05 [pull request][net 00/15] mlx5 fixes 2020-09-30 saeed
2020-10-01 2:05 ` [net 01/15] net/mlx5: Don't allow health work when device is uninitialized saeed
2020-10-01 19:21 ` David Miller
2020-10-01 19:41 ` Saeed Mahameed
2020-10-01 2:05 ` [net 02/15] net/mlx5: Fix a race when moving command interface to polling mode saeed
2020-10-01 2:05 ` [net 03/15] net/mlx5: Avoid possible free of command entry while timeout comp handler saeed
2020-10-01 2:05 ` [net 04/15] net/mlx5: poll cmd EQ in case of command timeout saeed
2020-10-01 2:05 ` [net 05/15] net/mlx5: Add retry mechanism to the command entry index allocation saeed
2020-10-01 2:05 ` [net 06/15] net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible saeed
2020-10-01 2:05 ` saeed [this message]
2020-10-01 2:05 ` [net 08/15] net/mlx5e: Fix error path for RQ alloc saeed
2020-10-01 2:05 ` [net 09/15] net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU saeed
2020-10-01 2:05 ` [net 10/15] net/mlx5e: CT, Fix coverity issue saeed
2020-10-01 2:05 ` [net 11/15] net/mlx5e: Fix driver's declaration to support GRE offload saeed
2020-10-01 2:05 ` [net 12/15] net/mlx5e: Fix return status when setting unsupported FEC mode saeed
2020-10-01 2:05 ` [net 13/15] net/mlx5e: Fix VLAN cleanup flow saeed
2020-10-01 2:05 ` [net 14/15] net/mlx5e: Fix VLAN create flow saeed
2020-10-01 2:05 ` [net 15/15] net/mlx5e: Fix race condition on nhe->n pointer in neigh update saeed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001020516.41217-8-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=eranbe@nvidia.com \
--cc=kuba@kernel.org \
--cc=maorg@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=saeedm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).