From: Jakub Kicinski <kuba@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, andrew@lunn.ch,
johannes@sipsolutions.net, jiri@resnulli.us, mkubecek@suse.cz,
dsahern@kernel.org, pablo@netfilter.org,
Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next v2 06/10] genetlink: bring back per op policy
Date: Thu, 1 Oct 2020 15:59:29 -0700 [thread overview]
Message-ID: <20201001225933.1373426-7-kuba@kernel.org> (raw)
In-Reply-To: <20201001225933.1373426-1-kuba@kernel.org>
Add policy to the struct genl_ops structure, this time
with maxattr, so it can be used properly.
Propagate .policy and .maxattr from the family
in genl_get_cmd() if needed, this way the rest of the
code does not have to worry if the policy is per op
or global.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
---
include/net/genetlink.h | 4 ++++
net/netlink/genetlink.c | 18 +++++++++++++-----
2 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index 8ea1fc1ed1c7..cb35625d001e 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -137,6 +137,8 @@ struct genl_small_ops {
* @cmd: command identifier
* @internal_flags: flags used by the family
* @flags: flags
+ * @maxattr: maximum number of attributes supported
+ * @policy: netlink policy (takes precedence over family policy)
* @doit: standard command callback
* @start: start callback for dumps
* @dumpit: callback for dumpers
@@ -149,6 +151,8 @@ struct genl_ops {
int (*dumpit)(struct sk_buff *skb,
struct netlink_callback *cb);
int (*done)(struct netlink_callback *cb);
+ const struct nla_policy *policy;
+ unsigned int maxattr;
u8 cmd;
u8 internal_flags;
u8 flags;
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index 183f01e62ae9..2a3608cfb179 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -116,6 +116,11 @@ static void genl_op_from_full(const struct genl_family *family,
unsigned int i, struct genl_ops *op)
{
*op = family->ops[i];
+
+ if (!op->maxattr)
+ op->maxattr = family->maxattr;
+ if (!op->policy)
+ op->policy = family->policy;
}
static int genl_get_cmd_full(u8 cmd, const struct genl_family *family,
@@ -142,6 +147,9 @@ static void genl_op_from_small(const struct genl_family *family,
op->internal_flags = family->small_ops[i].internal_flags;
op->flags = family->small_ops[i].flags;
op->validate = family->small_ops[i].validate;
+
+ op->maxattr = family->maxattr;
+ op->policy = family->policy;
}
static int genl_get_cmd_small(u8 cmd, const struct genl_family *family,
@@ -529,16 +537,16 @@ genl_family_rcv_msg_attrs_parse(const struct genl_family *family,
struct nlattr **attrbuf;
int err;
- if (!family->maxattr)
+ if (!ops->maxattr)
return NULL;
- attrbuf = kmalloc_array(family->maxattr + 1,
+ attrbuf = kmalloc_array(ops->maxattr + 1,
sizeof(struct nlattr *), GFP_KERNEL);
if (!attrbuf)
return ERR_PTR(-ENOMEM);
- err = __nlmsg_parse(nlh, hdrlen, attrbuf, family->maxattr,
- family->policy, validate, extack);
+ err = __nlmsg_parse(nlh, hdrlen, attrbuf, ops->maxattr, ops->policy,
+ validate, extack);
if (err) {
kfree(attrbuf);
return ERR_PTR(err);
@@ -845,7 +853,7 @@ static int ctrl_fill_info(const struct genl_family *family, u32 portid, u32 seq,
op_flags |= GENL_CMD_CAP_DUMP;
if (op.doit)
op_flags |= GENL_CMD_CAP_DO;
- if (family->policy)
+ if (op.policy)
op_flags |= GENL_CMD_CAP_HASPOL;
nest = nla_nest_start_noflag(skb, i + 1);
--
2.26.2
next prev parent reply other threads:[~2020-10-01 22:59 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 22:59 [PATCH net-next v2 00/10] genetlink: support per-command policy dump Jakub Kicinski
2020-10-01 22:59 ` [PATCH net-next v2 01/10] genetlink: reorg struct genl_family Jakub Kicinski
2020-10-01 22:59 ` [PATCH net-next v2 02/10] genetlink: add small version of ops Jakub Kicinski
2020-10-01 22:59 ` [PATCH net-next v2 03/10] genetlink: move to smaller ops wherever possible Jakub Kicinski
2020-10-01 22:59 ` [PATCH net-next v2 04/10] genetlink: add a structure for dump state Jakub Kicinski
2020-10-01 22:59 ` [PATCH net-next v2 05/10] genetlink: use .start callback for dumppolicy Jakub Kicinski
2020-10-01 22:59 ` Jakub Kicinski [this message]
2020-10-01 22:59 ` [PATCH net-next v2 07/10] taskstats: move specifying netlink policy back to ops Jakub Kicinski
2020-10-01 22:59 ` [PATCH net-next v2 08/10] genetlink: use parsed attrs in dumppolicy Jakub Kicinski
2020-10-02 6:30 ` Johannes Berg
2020-10-01 22:59 ` [PATCH net-next v2 09/10] genetlink: switch control commands to per-op policies Jakub Kicinski
2020-10-02 6:33 ` Johannes Berg
2020-10-01 22:59 ` [PATCH net-next v2 10/10] genetlink: allow dumping command-specific policy Jakub Kicinski
2020-10-02 6:34 ` Johannes Berg
2020-10-02 0:36 ` [PATCH net-next v2 00/10] genetlink: support per-command policy dump Jakub Kicinski
2020-10-02 6:29 ` Johannes Berg
2020-10-02 14:40 ` Jakub Kicinski
2020-10-02 14:42 ` Johannes Berg
2020-10-02 14:55 ` Jakub Kicinski
2020-10-02 14:58 ` Johannes Berg
2020-10-02 15:03 ` Jakub Kicinski
2020-10-02 15:04 ` Johannes Berg
2020-10-02 15:09 ` Jakub Kicinski
2020-10-02 15:13 ` Johannes Berg
2020-10-02 15:25 ` Jakub Kicinski
2020-10-02 15:28 ` Johannes Berg
2020-10-02 16:55 ` Michal Kubecek
2020-10-02 20:07 ` David Miller
2020-10-02 20:27 ` Johannes Berg
2020-10-02 20:50 ` Jakub Kicinski
2020-10-02 20:59 ` Johannes Berg
2020-10-02 21:00 ` Johannes Berg
2020-10-02 21:17 ` Jakub Kicinski
2020-10-02 21:22 ` Jakub Kicinski
2020-10-02 21:52 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001225933.1373426-7-kuba@kernel.org \
--to=kuba@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=jiri@resnulli.us \
--cc=johannes@sipsolutions.net \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
--cc=pablo@netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).