From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: netdev@vger.kernel.org
Cc: alexandre.belloni@bootlin.com, andrew@lunn.ch,
f.fainelli@gmail.com, vivien.didelot@gmail.com,
alexandru.marginean@nxp.com, claudiu.manoil@nxp.com,
xiaoliang.yang_1@nxp.com, hongbo.wang@nxp.com, kuba@kernel.org,
jiri@resnulli.us, idosch@idosch.org,
UNGLinuxDriver@microchip.com
Subject: [RFC PATCH 04/10] net: dsa: felix: reindent struct dsa_switch_ops
Date: Tue, 13 Oct 2020 16:48:43 +0300 [thread overview]
Message-ID: <20201013134849.395986-5-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20201013134849.395986-1-vladimir.oltean@nxp.com>
The devlink function pointer names are super long, and they would break
the alignment. So reindent the existing ops now by adding one tab.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/net/dsa/ocelot/felix.c | 78 +++++++++++++++++-----------------
1 file changed, 39 insertions(+), 39 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 29ccc3315863..184e3f79f579 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -768,45 +768,45 @@ static int felix_port_setup_tc(struct dsa_switch *ds, int port,
}
const struct dsa_switch_ops felix_switch_ops = {
- .get_tag_protocol = felix_get_tag_protocol,
- .setup = felix_setup,
- .teardown = felix_teardown,
- .set_ageing_time = felix_set_ageing_time,
- .get_strings = felix_get_strings,
- .get_ethtool_stats = felix_get_ethtool_stats,
- .get_sset_count = felix_get_sset_count,
- .get_ts_info = felix_get_ts_info,
- .phylink_validate = felix_phylink_validate,
- .phylink_mac_config = felix_phylink_mac_config,
- .phylink_mac_link_down = felix_phylink_mac_link_down,
- .phylink_mac_link_up = felix_phylink_mac_link_up,
- .port_enable = felix_port_enable,
- .port_disable = felix_port_disable,
- .port_fdb_dump = felix_fdb_dump,
- .port_fdb_add = felix_fdb_add,
- .port_fdb_del = felix_fdb_del,
- .port_mdb_prepare = felix_mdb_prepare,
- .port_mdb_add = felix_mdb_add,
- .port_mdb_del = felix_mdb_del,
- .port_bridge_join = felix_bridge_join,
- .port_bridge_leave = felix_bridge_leave,
- .port_stp_state_set = felix_bridge_stp_state_set,
- .port_vlan_prepare = felix_vlan_prepare,
- .port_vlan_filtering = felix_vlan_filtering,
- .port_vlan_add = felix_vlan_add,
- .port_vlan_del = felix_vlan_del,
- .port_hwtstamp_get = felix_hwtstamp_get,
- .port_hwtstamp_set = felix_hwtstamp_set,
- .port_rxtstamp = felix_rxtstamp,
- .port_txtstamp = felix_txtstamp,
- .port_change_mtu = felix_change_mtu,
- .port_max_mtu = felix_get_max_mtu,
- .port_policer_add = felix_port_policer_add,
- .port_policer_del = felix_port_policer_del,
- .cls_flower_add = felix_cls_flower_add,
- .cls_flower_del = felix_cls_flower_del,
- .cls_flower_stats = felix_cls_flower_stats,
- .port_setup_tc = felix_port_setup_tc,
+ .get_tag_protocol = felix_get_tag_protocol,
+ .setup = felix_setup,
+ .teardown = felix_teardown,
+ .set_ageing_time = felix_set_ageing_time,
+ .get_strings = felix_get_strings,
+ .get_ethtool_stats = felix_get_ethtool_stats,
+ .get_sset_count = felix_get_sset_count,
+ .get_ts_info = felix_get_ts_info,
+ .phylink_validate = felix_phylink_validate,
+ .phylink_mac_config = felix_phylink_mac_config,
+ .phylink_mac_link_down = felix_phylink_mac_link_down,
+ .phylink_mac_link_up = felix_phylink_mac_link_up,
+ .port_enable = felix_port_enable,
+ .port_disable = felix_port_disable,
+ .port_fdb_dump = felix_fdb_dump,
+ .port_fdb_add = felix_fdb_add,
+ .port_fdb_del = felix_fdb_del,
+ .port_mdb_prepare = felix_mdb_prepare,
+ .port_mdb_add = felix_mdb_add,
+ .port_mdb_del = felix_mdb_del,
+ .port_bridge_join = felix_bridge_join,
+ .port_bridge_leave = felix_bridge_leave,
+ .port_stp_state_set = felix_bridge_stp_state_set,
+ .port_vlan_prepare = felix_vlan_prepare,
+ .port_vlan_filtering = felix_vlan_filtering,
+ .port_vlan_add = felix_vlan_add,
+ .port_vlan_del = felix_vlan_del,
+ .port_hwtstamp_get = felix_hwtstamp_get,
+ .port_hwtstamp_set = felix_hwtstamp_set,
+ .port_rxtstamp = felix_rxtstamp,
+ .port_txtstamp = felix_txtstamp,
+ .port_change_mtu = felix_change_mtu,
+ .port_max_mtu = felix_get_max_mtu,
+ .port_policer_add = felix_port_policer_add,
+ .port_policer_del = felix_port_policer_del,
+ .cls_flower_add = felix_cls_flower_add,
+ .cls_flower_del = felix_cls_flower_del,
+ .cls_flower_stats = felix_cls_flower_stats,
+ .port_setup_tc = felix_port_setup_tc,
};
struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port)
--
2.25.1
next prev parent reply other threads:[~2020-10-13 13:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-13 13:48 [RFC PATCH 00/10] Configuring congestion watermarks on ocelot switch using devlink-sb Vladimir Oltean
2020-10-13 13:48 ` [RFC PATCH 01/10] net: mscc: ocelot: auto-detect packet buffer size and number of frame references Vladimir Oltean
2020-10-13 13:48 ` [RFC PATCH 02/10] net: mscc: ocelot: add ops for decoding watermark threshold and occupancy Vladimir Oltean
2020-10-13 13:48 ` [RFC PATCH 03/10] net: dsa: add ops for devlink-sb Vladimir Oltean
2020-10-13 13:48 ` Vladimir Oltean [this message]
2020-10-13 13:48 ` [RFC PATCH 05/10] net: dsa: felix: perform teardown in reverse order of setup Vladimir Oltean
2020-10-13 13:48 ` [RFC PATCH 06/10] net: mscc: ocelot: export NUM_TC constant from felix to common switch lib Vladimir Oltean
2020-10-13 13:48 ` [RFC PATCH 07/10] net: mscc: ocelot: delete unused ocelot_set_cpu_port prototype Vladimir Oltean
2020-10-13 13:48 ` [RFC PATCH 08/10] net: mscc: ocelot: register devlink ports Vladimir Oltean
2020-10-13 14:13 ` Jiri Pirko
2020-10-13 13:48 ` [RFC PATCH 09/10] net: mscc: ocelot: initialize watermarks to sane defaults Vladimir Oltean
2020-10-13 13:48 ` [RFC PATCH 10/10] net: mscc: ocelot: configure watermarks using devlink-sb Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201013134849.395986-5-vladimir.oltean@nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandru.marginean@nxp.com \
--cc=andrew@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=f.fainelli@gmail.com \
--cc=hongbo.wang@nxp.com \
--cc=idosch@idosch.org \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
--cc=xiaoliang.yang_1@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox