Re: [PATCH] net: phy: Prevent reporting advertised modes when autoneg is off

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

On Wed, Oct 14, 2020 at 02:56:50PM +0200, Łukasz Stelmach wrote:
> Do not report advertised link modes when autonegotiation is turned
> off. mii_ethtool_get_link_ksettings() exhibits the same behaviour.

Please explain why this is a desirable change.

Referring to some other piece of code isn't a particularly good reason
especially when that piece of code is likely derived from fairly old
code (presumably mii_ethtool_get_link_ksettings()'s behaviour is
designed to be compatible with mii_ethtool_gset()).

In any case, the mii.c code does fill in the advertising mask even when
autoneg is disabled, because, rightly or wrongly, the advertising mask
contains more than just the link modes, it includes the interface(s)
as well. Your change means phylib no longer reports the interface modes
which is at odds with the mii.c code.

> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
> ---
>  drivers/net/phy/phy.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 35525a671400..3cadf224fdb2 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -315,7 +315,8 @@ void phy_ethtool_ksettings_get(struct phy_device *phydev,
>  			       struct ethtool_link_ksettings *cmd)
>  {
>  	linkmode_copy(cmd->link_modes.supported, phydev->supported);
> -	linkmode_copy(cmd->link_modes.advertising, phydev->advertising);
> +	if (phydev->autoneg)
> +		linkmode_copy(cmd->link_modes.advertising, phydev->advertising);
>  	linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising);
>  
>  	cmd->base.speed = phydev->speed;
> -- 
> 2.26.2
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!