From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Sasha Levin <sashal@kernel.org>,
linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 32/52] can: flexcan: flexcan_chip_stop(): add error handling and propagate error value
Date: Sun, 18 Oct 2020 15:25:09 -0400 [thread overview]
Message-ID: <20201018192530.4055730-32-sashal@kernel.org> (raw)
In-Reply-To: <20201018192530.4055730-1-sashal@kernel.org>
From: Joakim Zhang <qiangqing.zhang@nxp.com>
[ Upstream commit 9ad02c7f4f279504bdd38ab706fdc97d5f2b2a9c ]
This patch implements error handling and propagates the error value of
flexcan_chip_stop(). This function will be called from flexcan_suspend()
in an upcoming patch in some SoCs which support LPSR mode.
Add a new function flexcan_chip_stop_disable_on_error() that tries to
disable the chip even in case of errors.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
[mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200922144429.2613631-11-mkl@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/flexcan.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 84dd79041285a..94468a883f369 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1055,18 +1055,23 @@ static int flexcan_chip_start(struct net_device *dev)
return err;
}
-/* flexcan_chip_stop
+/* __flexcan_chip_stop
*
- * this functions is entered with clocks enabled
+ * this function is entered with clocks enabled
*/
-static void flexcan_chip_stop(struct net_device *dev)
+static int __flexcan_chip_stop(struct net_device *dev, bool disable_on_error)
{
struct flexcan_priv *priv = netdev_priv(dev);
struct flexcan_regs __iomem *regs = priv->regs;
+ int err;
/* freeze + disable module */
- flexcan_chip_freeze(priv);
- flexcan_chip_disable(priv);
+ err = flexcan_chip_freeze(priv);
+ if (err && !disable_on_error)
+ return err;
+ err = flexcan_chip_disable(priv);
+ if (err && !disable_on_error)
+ goto out_chip_unfreeze;
/* Disable all interrupts */
flexcan_write(0, ®s->imask2);
@@ -1076,6 +1081,23 @@ static void flexcan_chip_stop(struct net_device *dev)
flexcan_transceiver_disable(priv);
priv->can.state = CAN_STATE_STOPPED;
+
+ return 0;
+
+ out_chip_unfreeze:
+ flexcan_chip_unfreeze(priv);
+
+ return err;
+}
+
+static inline int flexcan_chip_stop_disable_on_error(struct net_device *dev)
+{
+ return __flexcan_chip_stop(dev, true);
+}
+
+static inline int flexcan_chip_stop(struct net_device *dev)
+{
+ return __flexcan_chip_stop(dev, false);
}
static int flexcan_open(struct net_device *dev)
@@ -1129,7 +1151,7 @@ static int flexcan_close(struct net_device *dev)
netif_stop_queue(dev);
can_rx_offload_disable(&priv->offload);
- flexcan_chip_stop(dev);
+ flexcan_chip_stop_disable_on_error(dev);
free_irq(dev->irq, dev);
clk_disable_unprepare(priv->clk_per);
--
2.25.1
next prev parent reply other threads:[~2020-10-18 19:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20201018192530.4055730-1-sashal@kernel.org>
2020-10-18 19:24 ` [PATCH AUTOSEL 4.14 20/52] ipv6/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2) Sasha Levin
2020-10-18 19:24 ` [PATCH AUTOSEL 4.14 22/52] mac80211: handle lack of sband->bitrates in rates Sasha Levin
2020-10-18 19:25 ` Sasha Levin [this message]
2020-10-18 19:25 ` [PATCH AUTOSEL 4.14 33/52] ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs() Sasha Levin
2020-10-18 19:25 ` [PATCH AUTOSEL 4.14 38/52] Bluetooth: Only mark socket zapped after unlocking Sasha Levin
2020-10-18 19:25 ` [PATCH AUTOSEL 4.14 40/52] brcmsmac: fix memory leak in wlc_phy_attach_lcnphy Sasha Levin
2020-10-18 19:25 ` [PATCH AUTOSEL 4.14 41/52] rtl8xxxu: prevent potential memory leak Sasha Levin
2020-10-18 19:25 ` [PATCH AUTOSEL 4.14 46/52] ipvs: Fix uninit-value in do_ip_vs_set_ctl() Sasha Levin
2020-10-18 19:25 ` [PATCH AUTOSEL 4.14 48/52] mwifiex: don't call del_timer_sync() on uninitialized timer Sasha Levin
2020-10-18 19:25 ` [PATCH AUTOSEL 4.14 49/52] brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach Sasha Levin
2020-10-18 19:25 ` [PATCH AUTOSEL 4.14 52/52] ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201018192530.4055730-32-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=qiangqing.zhang@nxp.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).