[PATCH v2 0/3] net: dsa: mv88e6xxx: serdes link without phy

[PATCH v2 0/3] net: dsa: mv88e6xxx: serdes link without phy

[Chris Packham]

This small series gets my hardware into a working state. The key points are to
make sure we don't force the link and that we ask the MAC for the link status.
I also have updated my dts to say `phy-mode = "1000base-x";` and `managed =
"in-band-status";`

I've included patch #3 in this series but I don't have anything to test it on.
It's just a guess based on the datasheets.

Chris Packham (3):
  net: dsa: mv88e6xxx: Don't force link when using in-band-status
  net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185
  net: dsa: mv88e6xxx: Support serdes ports on MV88E6123/6131

 drivers/net/dsa/mv88e6xxx/chip.c   |  26 +++++++-
 drivers/net/dsa/mv88e6xxx/serdes.c | 102 +++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/serdes.h |   9 +++
 3 files changed, 135 insertions(+), 2 deletions(-)

-- 
2.28.0

[PATCH v2 1/3] net: dsa: mv88e6xxx: Don't force link when using in-band-status

[Chris Packham]

When a port is configured with 'managed = "in-band-status"' don't force
the link up, the switch MAC will detect the link status correctly.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---

Changes in v2:
- Add review from Andrew

 drivers/net/dsa/mv88e6xxx/chip.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index f0dbc05e30a4..1ef392ee52c5 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -767,8 +767,11 @@ static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port,
 				goto error;
 		}
 
-		if (ops->port_set_link)
-			err = ops->port_set_link(chip, port, LINK_FORCED_UP);
+		if (ops->port_set_link) {
+			int link = mode == MLO_AN_INBAND ? LINK_UNFORCED : LINK_FORCED_UP;
+
+			err = ops->port_set_link(chip, port, link);
+		}
 	}
 error:
 	mv88e6xxx_reg_unlock(chip);
-- 
2.28.0

[PATCH v2 2/3] net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185

[Chris Packham]

Implement serdes_power, serdes_get_lane and serdes_pcs_get_state ops for
the MV88E6097/6095/6185 so that ports 8 & 9 can be supported as serdes
ports and directly connected to other network interfaces or to SFPs
without a PHY.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Changes in v2:
- expand support to cover 6095 and 6185
- move serdes related code to serdes.c

 drivers/net/dsa/mv88e6xxx/chip.c   |  9 +++++
 drivers/net/dsa/mv88e6xxx/serdes.c | 58 ++++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/serdes.h |  5 +++
 3 files changed, 72 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 1ef392ee52c5..62d4d7b5d9ac 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3496,6 +3496,9 @@ static const struct mv88e6xxx_ops mv88e6095_ops = {
 	.stats_get_strings = mv88e6095_stats_get_strings,
 	.stats_get_stats = mv88e6095_stats_get_stats,
 	.mgmt_rsvd2cpu = mv88e6185_g2_mgmt_rsvd2cpu,
+	.serdes_power = mv88e6185_serdes_power,
+	.serdes_get_lane = mv88e6185_serdes_get_lane,
+	.serdes_pcs_get_state = mv88e6185_serdes_pcs_get_state,
 	.ppu_enable = mv88e6185_g1_ppu_enable,
 	.ppu_disable = mv88e6185_g1_ppu_disable,
 	.reset = mv88e6185_g1_reset,
@@ -3534,6 +3537,9 @@ static const struct mv88e6xxx_ops mv88e6097_ops = {
 	.set_egress_port = mv88e6095_g1_set_egress_port,
 	.watchdog_ops = &mv88e6097_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
+	.serdes_power = mv88e6185_serdes_power,
+	.serdes_get_lane = mv88e6185_serdes_get_lane,
+	.serdes_pcs_get_state = mv88e6185_serdes_pcs_get_state,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6085_g1_rmu_disable,
@@ -3958,6 +3964,9 @@ static const struct mv88e6xxx_ops mv88e6185_ops = {
 	.set_egress_port = mv88e6095_g1_set_egress_port,
 	.watchdog_ops = &mv88e6097_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6185_g2_mgmt_rsvd2cpu,
+	.serdes_power = mv88e6185_serdes_power,
+	.serdes_get_lane = mv88e6185_serdes_get_lane,
+	.serdes_pcs_get_state = mv88e6185_serdes_pcs_get_state,
 	.set_cascade_port = mv88e6185_g1_set_cascade_port,
 	.ppu_enable = mv88e6185_g1_ppu_enable,
 	.ppu_disable = mv88e6185_g1_ppu_disable,
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 9c07b4f3d345..2d52c8ede943 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -428,6 +428,64 @@ u8 mv88e6341_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
 	return lane;
 }
 
+int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
+			   bool up)
+{
+	/* The serdes power can't be controlled on this switch chip but we need
+	 * to supply this function to avoid returning -EOPNOTSUPP in
+	 * mv88e6xxx_serdes_power_up/mv88e6xxx_serdes_power_down
+	 */
+	return 0;
+}
+
+u8 mv88e6185_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
+{
+	switch (chip->ports[port].cmode) {
+	case MV88E6185_PORT_STS_CMODE_SERDES:
+	case MV88E6185_PORT_STS_CMODE_1000BASE_X:
+		return 0xff; /* Unused */
+	default:
+		return 0;
+	}
+}
+
+int mv88e6185_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
+				   u8 lane, struct phylink_link_state *state)
+{
+	int err;
+	u16 status;
+
+	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &status);
+	if (err)
+		return err;
+
+	state->link = !!(status & MV88E6XXX_PORT_STS_LINK);
+
+	if (state->link) {
+		state->duplex = status & MV88E6XXX_PORT_STS_DUPLEX ? DUPLEX_FULL : DUPLEX_HALF;
+
+		switch (status &  MV88E6XXX_PORT_STS_SPEED_MASK) {
+		case MV88E6XXX_PORT_STS_SPEED_1000:
+			state->speed = SPEED_1000;
+			break;
+		case MV88E6XXX_PORT_STS_SPEED_100:
+			state->speed = SPEED_100;
+			break;
+		case MV88E6XXX_PORT_STS_SPEED_10:
+			state->speed = SPEED_10;
+			break;
+		default:
+			dev_err(chip->dev, "invalid PHY speed\n");
+			return -EINVAL;
+		}
+	} else {
+		state->duplex = DUPLEX_UNKNOWN;
+		state->speed = SPEED_UNKNOWN;
+	}
+
+	return 0;
+}
+
 u8 mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
 {
 	u8 cmode = chip->ports[port].cmode;
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index 14315f26228a..c24ec4122c9e 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -73,6 +73,7 @@
 #define MV88E6390_PG_CONTROL		0xf010
 #define MV88E6390_PG_CONTROL_ENABLE_PC		BIT(0)
 
+u8 mv88e6185_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
 u8 mv88e6341_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
 u8 mv88e6352_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
 u8 mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
@@ -85,6 +86,8 @@ int mv88e6390_serdes_pcs_config(struct mv88e6xxx_chip *chip, int port,
 				u8 lane, unsigned int mode,
 				phy_interface_t interface,
 				const unsigned long *advertise);
+int mv88e6185_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
+				   u8 lane, struct phylink_link_state *state);
 int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
 				   u8 lane, struct phylink_link_state *state);
 int mv88e6390_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
@@ -101,6 +104,8 @@ unsigned int mv88e6352_serdes_irq_mapping(struct mv88e6xxx_chip *chip,
 					  int port);
 unsigned int mv88e6390_serdes_irq_mapping(struct mv88e6xxx_chip *chip,
 					  int port);
+int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
+			   bool up);
 int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
 			   bool on);
 int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
-- 
2.28.0

Re: [PATCH v2 2/3] net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185

[Andrew Lunn]

On Mon, Oct 19, 2020 at 03:43:54PM +1300, Chris Packham wrote:
> Implement serdes_power, serdes_get_lane and serdes_pcs_get_state ops for
> the MV88E6097/6095/6185 so that ports 8 & 9 can be supported as serdes
> ports and directly connected to other network interfaces or to SFPs
> without a PHY.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Just a nit pick below.

> +int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
> +			   bool up)
> +{
> +	/* The serdes power can't be controlled on this switch chip but we need
> +	 * to supply this function to avoid returning -EOPNOTSUPP in
> +	 * mv88e6xxx_serdes_power_up/mv88e6xxx_serdes_power_down
> +	 */
> +	return 0;
> +}
> +
> +u8 mv88e6185_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
> +{
> +	switch (chip->ports[port].cmode) {
> +	case MV88E6185_PORT_STS_CMODE_SERDES:
> +	case MV88E6185_PORT_STS_CMODE_1000BASE_X:
> +		return 0xff; /* Unused */
> +	default:
> +		return 0;
> +	}
> +}

mv88e6185_serdes_power() has a nice comment about why it exists and
just returns 0. It would be nice to have something similar here, that
there are no SERDES lane registers, but something other than 0 has to
be returned to indicate there is in fact a SERDES for the given port.

   Andrew

[PATCH v2 3/3] net: dsa: mv88e6xxx: Support serdes ports on MV88E6123/6131

[Chris Packham]

Implement serdes_power, serdes_get_lane and serdes_pcs_get_state ops for
the MV88E6123 so that the ports without a built-in PHY supported as
serdes ports and directly connected to other network interfaces or to
SFPs. Also implement serdes_get_regs_len and serdes_get_regs to aid
future debugging.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

This is untested (apart from compilation) it assumes the SERDES "phy"
address corresponds to the port number but I'm not confident that is a
valid assumption.

Changes in v2:
- new

 drivers/net/dsa/mv88e6xxx/chip.c   | 10 +++++++
 drivers/net/dsa/mv88e6xxx/serdes.c | 44 ++++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/serdes.h |  4 +++
 3 files changed, 58 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 62d4d7b5d9ac..5344fc84b03e 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3574,6 +3574,11 @@ static const struct mv88e6xxx_ops mv88e6123_ops = {
 	.set_egress_port = mv88e6095_g1_set_egress_port,
 	.watchdog_ops = &mv88e6097_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
+	.serdes_power = mv88e6123_serdes_power,
+	.serdes_get_lane = mv88e6185_serdes_get_lane,
+	.serdes_pcs_get_state = mv88e6185_serdes_pcs_get_state,
+	.serdes_get_regs_len = mv88e6123_serdes_get_regs_len,
+	.serdes_get_regs = mv88e6123_serdes_get_regs,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
 	.reset = mv88e6352_g1_reset,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -3613,6 +3618,11 @@ static const struct mv88e6xxx_ops mv88e6131_ops = {
 	.set_egress_port = mv88e6095_g1_set_egress_port,
 	.watchdog_ops = &mv88e6097_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6185_g2_mgmt_rsvd2cpu,
+	.serdes_power = mv88e6123_serdes_power,
+	.serdes_get_lane = mv88e6185_serdes_get_lane,
+	.serdes_pcs_get_state = mv88e6185_serdes_pcs_get_state,
+	.serdes_get_regs_len = mv88e6123_serdes_get_regs_len,
+	.serdes_get_regs = mv88e6123_serdes_get_regs,
 	.ppu_enable = mv88e6185_g1_ppu_enable,
 	.set_cascade_port = mv88e6185_g1_set_cascade_port,
 	.ppu_disable = mv88e6185_g1_ppu_disable,
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 2d52c8ede943..1f649a661720 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -428,6 +428,50 @@ u8 mv88e6341_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
 	return lane;
 }
 
+int mv88e6123_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
+			   bool up)
+{
+	u16 val, new_val;
+	int err;
+
+	err = mv88e6xxx_phy_read(chip, port, MII_BMCR, &val);
+	if (err)
+		return err;
+
+	if (up)
+		new_val = val & ~BMCR_PDOWN;
+	else
+		new_val = val | BMCR_PDOWN;
+
+	if (val != new_val)
+		err = mv88e6xxx_phy_write(chip, port, MII_BMCR, val);
+
+	return err;
+}
+
+int mv88e6123_serdes_get_regs_len(struct mv88e6xxx_chip *chip, int port)
+{
+	if (mv88e6xxx_serdes_get_lane(chip, port) == 0)
+		return 0;
+
+	return 26 * sizeof(u16);
+}
+
+void mv88e6123_serdes_get_regs(struct mv88e6xxx_chip *chip, int port, void *_p)
+{
+	u16 *p = _p;
+	u16 reg;
+	int i;
+
+	if (mv88e6xxx_serdes_get_lane(chip, port) == 0)
+		return;
+
+	for (i = 0; i < 26; i++) {
+		mv88e6xxx_phy_read(chip, port, i, &reg);
+		p[i] = reg;
+	}
+}
+
 int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
 			   bool up)
 {
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index c24ec4122c9e..b573139928c4 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -104,6 +104,8 @@ unsigned int mv88e6352_serdes_irq_mapping(struct mv88e6xxx_chip *chip,
 					  int port);
 unsigned int mv88e6390_serdes_irq_mapping(struct mv88e6xxx_chip *chip,
 					  int port);
+int mv88e6123_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
+			   bool up);
 int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
 			   bool up);
 int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
@@ -129,6 +131,8 @@ int mv88e6390_serdes_get_strings(struct mv88e6xxx_chip *chip,
 int mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
 			       uint64_t *data);
 
+int mv88e6123_serdes_get_regs_len(struct mv88e6xxx_chip *chip, int port);
+void mv88e6123_serdes_get_regs(struct mv88e6xxx_chip *chip, int port, void *_p);
 int mv88e6352_serdes_get_regs_len(struct mv88e6xxx_chip *chip, int port);
 void mv88e6352_serdes_get_regs(struct mv88e6xxx_chip *chip, int port, void *_p);
 int mv88e6390_serdes_get_regs_len(struct mv88e6xxx_chip *chip, int port);
-- 
2.28.0