From: Ido Schimmel <idosch@idosch.org>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, jiri@nvidia.com,
amcohen@nvidia.com, mlxsw@nvidia.com,
Ido Schimmel <idosch@nvidia.com>
Subject: [PATCH net 1/3] mlxsw: Only advertise link modes supported by both driver and device
Date: Sat, 24 Oct 2020 16:37:31 +0300 [thread overview]
Message-ID: <20201024133733.2107509-2-idosch@idosch.org> (raw)
In-Reply-To: <20201024133733.2107509-1-idosch@idosch.org>
From: Amit Cohen <amcohen@nvidia.com>
During port creation the driver instructs the device to advertise all
the supported link modes queried from the device.
Since cited commit not all the link modes supported by the device are
supported by the driver. This can result in the device negotiating a
link mode that is not recognized by the driver causing ethtool to show
an unsupported speed:
$ ethtool swp1
...
Speed: Unknown!
This is especially problematic when the netdev is enslaved to a bond, as
the bond driver uses unknown speed as an indication that the link is
down:
[13048.900895] net_ratelimit: 86 callbacks suppressed
[13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex
[13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex
Fix this by making sure that only link modes that are supported by both
the device and the driver are advertised.
Fixes: b97cd891268d ("mlxsw: Remove 56G speed support")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
.../net/ethernet/mellanox/mlxsw/spectrum.c | 9 ++++--
.../net/ethernet/mellanox/mlxsw/spectrum.h | 1 +
.../mellanox/mlxsw/spectrum_ethtool.c | 30 +++++++++++++++++++
3 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 16b47fce540b..b08853f71b2b 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -1174,11 +1174,14 @@ mlxsw_sp_port_speed_by_width_set(struct mlxsw_sp_port *mlxsw_sp_port)
u32 eth_proto_cap, eth_proto_admin, eth_proto_oper;
const struct mlxsw_sp_port_type_speed_ops *ops;
char ptys_pl[MLXSW_REG_PTYS_LEN];
+ u32 eth_proto_cap_masked;
int err;
ops = mlxsw_sp->port_type_speed_ops;
- /* Set advertised speeds to supported speeds. */
+ /* Set advertised speeds to speeds supported by both the driver
+ * and the device.
+ */
ops->reg_ptys_eth_pack(mlxsw_sp, ptys_pl, mlxsw_sp_port->local_port,
0, false);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(ptys), ptys_pl);
@@ -1187,8 +1190,10 @@ mlxsw_sp_port_speed_by_width_set(struct mlxsw_sp_port *mlxsw_sp_port)
ops->reg_ptys_eth_unpack(mlxsw_sp, ptys_pl, ð_proto_cap,
ð_proto_admin, ð_proto_oper);
+ eth_proto_cap_masked = ops->ptys_proto_cap_masked_get(eth_proto_cap);
ops->reg_ptys_eth_pack(mlxsw_sp, ptys_pl, mlxsw_sp_port->local_port,
- eth_proto_cap, mlxsw_sp_port->link.autoneg);
+ eth_proto_cap_masked,
+ mlxsw_sp_port->link.autoneg);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptys), ptys_pl);
}
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index 3e26eb6cb140..74b3959b36d4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
@@ -342,6 +342,7 @@ struct mlxsw_sp_port_type_speed_ops {
u32 *p_eth_proto_cap,
u32 *p_eth_proto_admin,
u32 *p_eth_proto_oper);
+ u32 (*ptys_proto_cap_masked_get)(u32 eth_proto_cap);
};
static inline struct net_device *
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
index 2096b6478958..540616469e28 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
@@ -1303,6 +1303,20 @@ mlxsw_sp1_reg_ptys_eth_unpack(struct mlxsw_sp *mlxsw_sp, char *payload,
p_eth_proto_oper);
}
+static u32 mlxsw_sp1_ptys_proto_cap_masked_get(u32 eth_proto_cap)
+{
+ u32 ptys_proto_cap_masked = 0;
+ int i;
+
+ for (i = 0; i < MLXSW_SP1_PORT_LINK_MODE_LEN; i++) {
+ if (mlxsw_sp1_port_link_mode[i].mask & eth_proto_cap)
+ ptys_proto_cap_masked |=
+ mlxsw_sp1_port_link_mode[i].mask;
+ }
+
+ return ptys_proto_cap_masked;
+}
+
const struct mlxsw_sp_port_type_speed_ops mlxsw_sp1_port_type_speed_ops = {
.from_ptys_supported_port = mlxsw_sp1_from_ptys_supported_port,
.from_ptys_link = mlxsw_sp1_from_ptys_link,
@@ -1313,6 +1327,7 @@ const struct mlxsw_sp_port_type_speed_ops mlxsw_sp1_port_type_speed_ops = {
.to_ptys_speed = mlxsw_sp1_to_ptys_speed,
.reg_ptys_eth_pack = mlxsw_sp1_reg_ptys_eth_pack,
.reg_ptys_eth_unpack = mlxsw_sp1_reg_ptys_eth_unpack,
+ .ptys_proto_cap_masked_get = mlxsw_sp1_ptys_proto_cap_masked_get,
};
static const enum ethtool_link_mode_bit_indices
@@ -1731,6 +1746,20 @@ mlxsw_sp2_reg_ptys_eth_unpack(struct mlxsw_sp *mlxsw_sp, char *payload,
p_eth_proto_admin, p_eth_proto_oper);
}
+static u32 mlxsw_sp2_ptys_proto_cap_masked_get(u32 eth_proto_cap)
+{
+ u32 ptys_proto_cap_masked = 0;
+ int i;
+
+ for (i = 0; i < MLXSW_SP2_PORT_LINK_MODE_LEN; i++) {
+ if (mlxsw_sp2_port_link_mode[i].mask & eth_proto_cap)
+ ptys_proto_cap_masked |=
+ mlxsw_sp2_port_link_mode[i].mask;
+ }
+
+ return ptys_proto_cap_masked;
+}
+
const struct mlxsw_sp_port_type_speed_ops mlxsw_sp2_port_type_speed_ops = {
.from_ptys_supported_port = mlxsw_sp2_from_ptys_supported_port,
.from_ptys_link = mlxsw_sp2_from_ptys_link,
@@ -1741,4 +1770,5 @@ const struct mlxsw_sp_port_type_speed_ops mlxsw_sp2_port_type_speed_ops = {
.to_ptys_speed = mlxsw_sp2_to_ptys_speed,
.reg_ptys_eth_pack = mlxsw_sp2_reg_ptys_eth_pack,
.reg_ptys_eth_unpack = mlxsw_sp2_reg_ptys_eth_unpack,
+ .ptys_proto_cap_masked_get = mlxsw_sp2_ptys_proto_cap_masked_get,
};
--
2.26.2
next prev parent reply other threads:[~2020-10-24 13:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-24 13:37 [PATCH net 0/3] mlxsw: Various fixes Ido Schimmel
2020-10-24 13:37 ` Ido Schimmel [this message]
2020-10-24 13:37 ` [PATCH net 2/3] mlxsw: core: Fix memory leak on module removal Ido Schimmel
2020-10-24 13:37 ` [PATCH net 3/3] mlxsw: core: Fix use-after-free in mlxsw_emad_trans_finish() Ido Schimmel
2020-10-26 23:56 ` [PATCH net 0/3] mlxsw: Various fixes Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201024133733.2107509-2-idosch@idosch.org \
--to=idosch@idosch.org \
--cc=amcohen@nvidia.com \
--cc=davem@davemloft.net \
--cc=idosch@nvidia.com \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=mlxsw@nvidia.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox