netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Vlad Buslov <vladbu@nvidia.com>
Cc: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Cong Wang <xiyou.wangcong@gmail.com>,
	Jamal Hadi Salim <jhs@mojatatu.com>,
	Jiri Pirko <jiri@resnulli.us>,
	netdev@vger.kernel.org, Pablo Neira Ayuso <pablo@netfilter.org>
Subject: Re: [PATCH net] net: use proper block lock instead of RTNL lock
Date: Mon, 26 Oct 2020 10:28:15 +0200	[thread overview]
Message-ID: <20201026082815.GB4821@unreal> (raw)
In-Reply-To: <ygnhd015z9u0.fsf@nvidia.com>

On Mon, Oct 26, 2020 at 10:10:31AM +0200, Vlad Buslov wrote:
> On Mon 26 Oct 2020 at 08:04, Leon Romanovsky <leon@kernel.org> wrote:
> > From: Leon Romanovsky <leonro@nvidia.com>
> >
> > The tcf_block_unbind() expects that the caller will take block->cb_lock
> > before calling it, however the code took RTNL lock instead. This causes
> > to the following kernel panic.
> >
> >  WARNING: CPU: 1 PID: 13524 at net/sched/cls_api.c:1488 tcf_block_unbind+0x2db/0x420
> >  Modules linked in: mlx5_ib mlx5_core mlxfw ptp pps_core act_mirred act_tunnel_key cls_flower vxlan ip6_udp_tunnel udp_tunnel dummy sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad ib_ipoib rdma_cm iw_cm ib_cm ib_uverbs ib_core overlay [last unloaded: mlxfw]
> >  CPU: 1 PID: 13524 Comm: test-ecmp-add-v Tainted: G        W         5.9.0+ #1
> >  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
> >  RIP: 0010:tcf_block_unbind+0x2db/0x420
> >  Code: ff 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8d bc 24 30 01 00 00 be ff ff ff ff e8 7d 7f 70 00 85 c0 0f 85 7b fd ff ff <0f> 0b e9 74 fd ff ff 48 c7 c7 dc 6a 24 84 e8 02 ec fe fe e9 55 fd
> >  RSP: 0018:ffff888117d17968 EFLAGS: 00010246
> >  RAX: 0000000000000000 RBX: ffff88812f713c00 RCX: 1ffffffff0848d5b
> >  RDX: 0000000000000001 RSI: ffff88814fbc8130 RDI: ffff888107f2b878
> >  RBP: 1ffff11022fa2f3f R08: 0000000000000000 R09: ffffffff84115a87
> >  R10: fffffbfff0822b50 R11: ffff888107f2b898 R12: ffff88814fbc8000
> >  R13: ffff88812f713c10 R14: ffff888117d17a38 R15: ffff88814fbc80c0
> >  FS:  00007f6593d36740(0000) GS:ffff8882a4f00000(0000) knlGS:0000000000000000
> >  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >  CR2: 00005607a00758f8 CR3: 0000000131aea006 CR4: 0000000000170ea0
> >  Call Trace:
> >   tc_block_indr_cleanup+0x3e0/0x5a0
> >   ? tcf_block_unbind+0x420/0x420
> >   ? __mutex_unlock_slowpath+0xe7/0x610
> >   flow_indr_dev_unregister+0x5e2/0x930
> >   ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core]
> >   ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core]
> >   ? flow_indr_block_cb_alloc+0x3c0/0x3c0
> >   ? mlx5_db_free+0x37c/0x4b0 [mlx5_core]
> >   mlx5e_cleanup_rep_tx+0x8b/0xc0 [mlx5_core]
> >   mlx5e_detach_netdev+0xe5/0x120 [mlx5_core]
> >   mlx5e_vport_rep_unload+0x155/0x260 [mlx5_core]
> >   esw_offloads_disable+0x227/0x2b0 [mlx5_core]
> >   mlx5_eswitch_disable_locked.cold+0x38e/0x699 [mlx5_core]
> >   mlx5_eswitch_disable+0x94/0xf0 [mlx5_core]
> >   mlx5_device_disable_sriov+0x183/0x1f0 [mlx5_core]
> >   mlx5_core_sriov_configure+0xfd/0x230 [mlx5_core]
> >   sriov_numvfs_store+0x261/0x2f0
> >   ? sriov_drivers_autoprobe_store+0x110/0x110
> >   ? sysfs_file_ops+0x170/0x170
> >   ? sysfs_file_ops+0x117/0x170
> >   ? sysfs_file_ops+0x170/0x170
> >   kernfs_fop_write+0x1ff/0x3f0
> >   ? rcu_read_lock_any_held+0x6e/0x90
> >   vfs_write+0x1f3/0x620
> >   ksys_write+0xf9/0x1d0
> >   ? __x64_sys_read+0xb0/0xb0
> >   ? lockdep_hardirqs_on_prepare+0x273/0x3f0
> >   ? syscall_enter_from_user_mode+0x1d/0x50
> >   do_syscall_64+0x2d/0x40
> >   entry_SYSCALL_64_after_hwframe+0x44/0xa9
> >
> > <...>
> >
> >  ---[ end trace bfdd028ada702879 ]---
> >
> > Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()")
> > Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
> > ---
> >  net/sched/cls_api.c | 4 +---
> >  1 file changed, 1 insertion(+), 3 deletions(-)
> >
> > diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
> > index faeabff283a2..fca147386ad2 100644
> > --- a/net/sched/cls_api.c
> > +++ b/net/sched/cls_api.c
> > @@ -655,10 +655,8 @@ static void tc_block_indr_cleanup(struct flow_block_cb *block_cb)
> >  	down_write(&block->cb_lock);
> >  	list_del(&block_cb->driver_list);
> >  	list_move(&block_cb->list, &bo.cb_list);
> > -	up_write(&block->cb_lock);
> > -	rtnl_lock();
> >  	tcf_block_unbind(block, &bo);
> > -	rtnl_unlock();
> > +	up_write(&block->cb_lock);
>
> Hi Leon,
>
> This fix probably breaks all other drivers besides mlx5 that require
> rtnl lock on TC filter update path (called from tp->ops->reoffload()).
> I suggest both rtnl lock and cb_lock are required here.

You are not taking rtnl lock in other bind/unbind paths, why this is different?
Are you taking rtnl lock in layers above?

Thanks

  reply	other threads:[~2020-10-26  8:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-26  6:04 [PATCH net] net: use proper block lock instead of RTNL lock Leon Romanovsky
2020-10-26  8:10 ` Vlad Buslov
2020-10-26  8:28   ` Leon Romanovsky [this message]
2020-10-26 11:26     ` Vlad Buslov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201026082815.GB4821@unreal \
    --to=leon@kernel.org \
    --cc=davem@davemloft.net \
    --cc=jhs@mojatatu.com \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pablo@netfilter.org \
    --cc=vladbu@nvidia.com \
    --cc=xiyou.wangcong@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).