netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Ungerer <gerg@linux-m68k.org>
To: netdev@vger.kernel.org
Cc: andrew@lunn.ch, fugang.duan@nxp.com, cphealy@gmail.com,
	dkarr@vyex.com, clemens.gruber@pqgruber.com,
	Greg Ungerer <gerg@linux-m68k.org>
Subject: [PATCH v2] net: fec: fix MDIO probing for some FEC hardware blocks
Date: Wed, 28 Oct 2020 15:22:32 +1000	[thread overview]
Message-ID: <20201028052232.1315167-1-gerg@linux-m68k.org> (raw)

Some (apparently older) versions of the FEC hardware block do not like
the MMFR register being cleared to avoid generation of MII events at
initialization time. The action of clearing this register results in no
future MII events being generated at all on the problem block. This means
the probing of the MDIO bus will find no PHYs.

Create a quirk that can be checked at the FECs MII init time so that
the right thing is done. The quirk is set as appropriate for the FEC
hardware blocks that are known to need this.

Fixes: f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO")
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
---
 drivers/net/ethernet/freescale/fec.h      |  6 +++++
 drivers/net/ethernet/freescale/fec_main.c | 29 +++++++++++++----------
 2 files changed, 22 insertions(+), 13 deletions(-)

v2: use quirk for imx28 as well

Resending for consideration based on Andy's last comment that this fix
is enough on its own for all hardware types.

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 832a2175636d..c527f4ee1d3a 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -456,6 +456,12 @@ struct bufdesc_ex {
  */
 #define FEC_QUIRK_HAS_FRREG		(1 << 16)
 
+/* Some FEC hardware blocks need the MMFR cleared at setup time to avoid
+ * the generation of an MII event. This must be avoided in the older
+ * FEC blocks where it will stop MII events being generated.
+ */
+#define FEC_QUIRK_CLEAR_SETUP_MII	(1 << 17)
+
 struct bufdesc_prop {
 	int qid;
 	/* Address of Rx and Tx buffers */
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index fb37816a74db..65784d3e54a5 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -100,14 +100,14 @@ static const struct fec_devinfo fec_imx27_info = {
 static const struct fec_devinfo fec_imx28_info = {
 	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
 		  FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
-		  FEC_QUIRK_HAS_FRREG,
+		  FEC_QUIRK_HAS_FRREG | FEC_QUIRK_CLEAR_SETUP_MII,
 };
 
 static const struct fec_devinfo fec_imx6q_info = {
 	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
 		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
 		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
-		  FEC_QUIRK_HAS_RACC,
+		  FEC_QUIRK_HAS_RACC | FEC_QUIRK_CLEAR_SETUP_MII,
 };
 
 static const struct fec_devinfo fec_mvf600_info = {
@@ -119,7 +119,8 @@ static const struct fec_devinfo fec_imx6x_info = {
 		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
 		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
 		  FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
-		  FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+		  FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE |
+		  FEC_QUIRK_CLEAR_SETUP_MII,
 };
 
 static const struct fec_devinfo fec_imx6ul_info = {
@@ -127,7 +128,7 @@ static const struct fec_devinfo fec_imx6ul_info = {
 		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
 		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
 		  FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
-		  FEC_QUIRK_HAS_COALESCE,
+		  FEC_QUIRK_HAS_COALESCE | FEC_QUIRK_CLEAR_SETUP_MII,
 };
 
 static struct platform_device_id fec_devtype[] = {
@@ -2114,15 +2115,17 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	if (suppress_preamble)
 		fep->phy_speed |= BIT(7);
 
-	/* Clear MMFR to avoid to generate MII event by writing MSCR.
-	 * MII event generation condition:
-	 * - writing MSCR:
-	 *	- mmfr[31:0]_not_zero & mscr[7:0]_is_zero &
-	 *	  mscr_reg_data_in[7:0] != 0
-	 * - writing MMFR:
-	 *	- mscr[7:0]_not_zero
-	 */
-	writel(0, fep->hwp + FEC_MII_DATA);
+	if (fep->quirks & FEC_QUIRK_CLEAR_SETUP_MII) {
+		/* Clear MMFR to avoid to generate MII event by writing MSCR.
+		 * MII event generation condition:
+		 * - writing MSCR:
+		 *	- mmfr[31:0]_not_zero & mscr[7:0]_is_zero &
+		 *	  mscr_reg_data_in[7:0] != 0
+		 * - writing MMFR:
+		 *	- mscr[7:0]_not_zero
+		 */
+		writel(0, fep->hwp + FEC_MII_DATA);
+	}
 
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
-- 
2.25.1


             reply	other threads:[~2020-10-29  0:53 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-28  5:22 Greg Ungerer [this message]
2020-10-28  5:28 ` [EXT] [PATCH v2] net: fec: fix MDIO probing for some FEC hardware blocks Andy Duan
2020-10-30  0:02 ` Andrew Lunn
2020-10-30 15:26   ` Jakub Kicinski
2020-10-30 10:53 ` Clemens Gruber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201028052232.1315167-1-gerg@linux-m68k.org \
    --to=gerg@linux-m68k.org \
    --cc=andrew@lunn.ch \
    --cc=clemens.gruber@pqgruber.com \
    --cc=cphealy@gmail.com \
    --cc=dkarr@vyex.com \
    --cc=fugang.duan@nxp.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).