From: "Marek Behún" <kabel@kernel.org>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, "Marek Behún" <kabel@kernel.org>,
"Andrew Lunn" <andrew@lunn.ch>,
"Russell King" <rmk+kernel@armlinux.org.uk>
Subject: [PATCH net-next v2 3/5] net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY release
Date: Thu, 29 Oct 2020 23:25:07 +0100 [thread overview]
Message-ID: <20201029222509.27201-4-kabel@kernel.org> (raw)
In-Reply-To: <20201029222509.27201-1-kabel@kernel.org>
Instead of configuring the I2C mdiobus when SFP driver is probed,
create/destroy the mdiobus before the PHY is probed for/after it is
released.
This way we can tell the mdio-i2c code which protocol to use for each
SFP transceiver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/sfp.c | 32 +++++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index b1f9fc3a5584..3c3da19039d5 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -217,6 +217,7 @@ struct sfp {
struct i2c_adapter *i2c;
struct mii_bus *i2c_mii;
struct sfp_bus *sfp_bus;
+ enum mdio_i2c_proto mdio_protocol;
struct phy_device *mod_phy;
const struct sff_data *type;
u32 max_power_mW;
@@ -399,9 +400,6 @@ static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
{
- struct mii_bus *i2c_mii;
- int ret;
-
if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
return -EINVAL;
@@ -409,7 +407,15 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
sfp->read = sfp_i2c_read;
sfp->write = sfp_i2c_write;
- i2c_mii = mdio_i2c_alloc(sfp->dev, i2c, MDIO_I2C_DEFAULT);
+ return 0;
+}
+
+static int sfp_i2c_mdiobus_create(struct sfp *sfp)
+{
+ struct mii_bus *i2c_mii;
+ int ret;
+
+ i2c_mii = mdio_i2c_alloc(sfp->dev, sfp->i2c, sfp->mdio_protocol);
if (IS_ERR(i2c_mii))
return PTR_ERR(i2c_mii);
@@ -427,6 +433,12 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
return 0;
}
+static void sfp_i2c_mdiobus_destroy(struct sfp *sfp)
+{
+ mdiobus_unregister(sfp->i2c_mii);
+ sfp->i2c_mii = NULL;
+}
+
/* Interface */
static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
{
@@ -1768,6 +1780,8 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
else
sfp->module_t_start_up = T_START_UP;
+ sfp->mdio_protocol = MDIO_I2C_DEFAULT;
+
return 0;
}
@@ -1936,8 +1950,10 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
sfp_sm_link_down(sfp);
if (sfp->sm_state > SFP_S_INIT)
sfp_module_stop(sfp->sfp_bus);
- if (sfp->mod_phy)
+ if (sfp->mod_phy) {
sfp_sm_phy_detach(sfp);
+ sfp_i2c_mdiobus_destroy(sfp);
+ }
sfp_module_tx_disable(sfp);
sfp_soft_stop_poll(sfp);
sfp_sm_next(sfp, SFP_S_DOWN, 0);
@@ -2000,6 +2016,12 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
sfp->sm_fault_retries == N_FAULT_INIT);
} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
init_done:
+ /* Create mdiobus and start trying for PHY */
+ ret = sfp_i2c_mdiobus_create(sfp);
+ if (ret < 0) {
+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
+ break;
+ }
sfp->sm_phy_retries = R_PHY_RETRY;
goto phy_probe;
}
--
2.26.2
next prev parent reply other threads:[~2020-10-29 22:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-29 22:25 [PATCH net-next v2 0/5] Support for RollBall 10G copper SFP modules Marek Behún
2020-10-29 22:25 ` [PATCH net-next v2 1/5] net: phy: mdio-i2c: support I2C MDIO protocol for RollBall " Marek Behún
2020-10-30 15:20 ` Russell King - ARM Linux admin
2020-10-29 22:25 ` [PATCH net-next v2 2/5] net: phylink: allow attaching phy for SFP modules on 802.3z mode Marek Behún
2020-10-30 16:29 ` Russell King - ARM Linux admin
2020-10-29 22:25 ` Marek Behún [this message]
2020-10-30 16:31 ` [PATCH net-next v2 3/5] net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY release Russell King - ARM Linux admin
2020-10-29 22:25 ` [PATCH net-next v2 4/5] net: phy: marvell10g: change MACTYPE if underlying MAC does not support it Marek Behún
2020-10-29 22:25 ` [PATCH net-next v2 5/5] net: sfp: add support for multigig RollBall transceivers Marek Behún
2020-10-30 16:33 ` Russell King - ARM Linux admin
2020-10-30 15:01 ` [PATCH net-next v2 0/5] Support for RollBall 10G copper SFP modules Russell King - ARM Linux admin
2020-10-30 15:29 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201029222509.27201-4-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).