From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Thomas Kopp <thomas.kopp@microchip.com>
Subject: [net 21/27] can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
Date: Tue, 3 Nov 2020 23:06:30 +0100 [thread overview]
Message-ID: <20201103220636.972106-22-mkl@pengutronix.de> (raw)
In-Reply-To: <20201103220636.972106-1-mkl@pengutronix.de>
During debugging it turned out that some people have setups where the SPI
communication is more prone to CRC errors.
Increase the severity of both the transfer retry and transfer failure message
to give users feedback without the need to recompile the driver with debug
enabled.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Link: http://lore.kernel.org/r/20201019190524.1285319-15-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c
index ba25902dd78c..c9ffc5ea2b25 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c
@@ -330,17 +330,17 @@ mcp251xfd_regmap_crc_read(void *context,
goto out;
}
- netdev_dbg(priv->ndev,
- "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x) retrying.\n",
- reg, val_len, (int)val_len, buf_rx->data,
- get_unaligned_be16(buf_rx->data + val_len));
- }
-
- if (err) {
netdev_info(priv->ndev,
- "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x).\n",
+ "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x) retrying.\n",
reg, val_len, (int)val_len, buf_rx->data,
get_unaligned_be16(buf_rx->data + val_len));
+ }
+
+ if (err) {
+ netdev_err(priv->ndev,
+ "CRC read error at address 0x%04x (length=%zd, data=%*ph, CRC=0x%04x).\n",
+ reg, val_len, (int)val_len, buf_rx->data,
+ get_unaligned_be16(buf_rx->data + val_len));
return err;
}
--
2.28.0
next prev parent reply other threads:[~2020-11-03 22:07 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-03 22:06 pull-request: can 2020-11-03 Marc Kleine-Budde
2020-11-03 22:06 ` [net 01/27] dt-bindings: can: add can-controller.yaml Marc Kleine-Budde
2020-11-03 22:06 ` [net 02/27] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml Marc Kleine-Budde
2020-11-03 22:06 ` [net 03/27] can: proc: can_remove_proc(): silence remove_proc_entry warning Marc Kleine-Budde
2020-11-03 22:06 ` [net 04/27] can: rx-offload: don't call kfree_skb() from IRQ context Marc Kleine-Budde
2020-11-03 22:06 ` [net 05/27] can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard " Marc Kleine-Budde
2020-11-04 1:21 ` Jakub Kicinski
2020-11-04 4:29 ` Vincent MAILHOL
2020-11-04 8:16 ` Eric Dumazet
2020-11-04 14:59 ` Oliver Hartkopp
2020-11-04 16:02 ` Jakub Kicinski
2020-11-04 17:46 ` Oliver Hartkopp
2020-11-05 4:47 ` Vincent MAILHOL
2020-11-05 7:44 ` Marc Kleine-Budde
2020-11-03 22:06 ` [net 06/27] can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames Marc Kleine-Budde
2020-11-03 22:06 ` [net 07/27] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone() Marc Kleine-Budde
2020-11-03 22:06 ` [net 08/27] can: j1939: rename jacd tool Marc Kleine-Budde
2020-11-03 22:06 ` [net 09/27] can: j1939: fix syntax and spelling Marc Kleine-Budde
2020-11-03 22:06 ` [net 10/27] can: j1939: swap addr and pgn in the send example Marc Kleine-Budde
2020-11-03 22:06 ` [net 11/27] can: j1939: use backquotes for code samples Marc Kleine-Budde
2020-11-03 22:06 ` [net 12/27] can: j1939: j1939_sk_bind(): return failure if netdev is down Marc Kleine-Budde
2020-11-03 22:06 ` [net 13/27] can: isotp: Explain PDU in CAN_ISOTP help text Marc Kleine-Budde
2020-11-03 22:06 ` [net 14/27] can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode Marc Kleine-Budde
2020-11-03 22:06 ` [net 15/27] can: isotp: padlen(): make const array static, makes object smaller Marc Kleine-Budde
2020-11-03 22:06 ` [net 16/27] can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path Marc Kleine-Budde
2020-11-03 22:06 ` [net 17/27] can: xilinx_can: handle failure cases of pm_runtime_get_sync Marc Kleine-Budde
2020-11-03 22:06 ` [net 18/27] can: peak_usb: add range checking in decode operations Marc Kleine-Budde
2020-11-03 22:06 ` [net 19/27] can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping Marc Kleine-Budde
2020-11-03 22:06 ` [net 20/27] can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on Marc Kleine-Budde
2020-11-03 22:06 ` Marc Kleine-Budde [this message]
2020-11-05 16:24 ` [net 21/27] can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages Manivannan Sadhasivam
2020-11-05 16:39 ` Marc Kleine-Budde
2020-11-05 18:14 ` Manivannan Sadhasivam
2020-11-06 8:35 ` Marc Kleine-Budde
2020-11-03 22:06 ` [net 22/27] can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings Marc Kleine-Budde
2020-11-03 22:06 ` [net 23/27] can: mcp251xfd: remove unneeded break Marc Kleine-Budde
2020-11-03 22:06 ` [net 24/27] can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A Marc Kleine-Budde
2020-11-03 22:06 ` [net 25/27] can: flexcan: add ECC initialization for LX2160A Marc Kleine-Budde
2020-11-03 22:06 ` [net 26/27] can: flexcan: add ECC initialization for VF610 Marc Kleine-Budde
2020-11-03 22:06 ` [net 27/27] can: flexcan: flexcan_remove(): disable wakeup completely Marc Kleine-Budde
2020-11-04 18:43 ` pull-request: can 2020-11-03 Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201103220636.972106-22-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=thomas.kopp@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).