[PATCH net-next v1] net: phy: spi_ks8995: Do not overwrite SPI mode flags

[Sven Van Asbroeck <thesven73@gmail.com>]

From: Sven Van Asbroeck <thesven73@gmail.com>

This driver makes sure the underlying SPI bus is set to "mode 0"
by assigning SPI_MODE_0 to spi->mode. This overwrites all other
SPI mode flags.

In some circumstances, this can break the underlying SPI bus driver.
For example, if SPI_CS_HIGH is set on the SPI bus, the driver
will clear that flag, which results in a chip-select polarity issue.

Fix by changing only the SPI_MODE_N bits, i.e. SPI_CPHA and SPI_CPOL.

Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
---

Tree: git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git # bff6f1db91e3

To: Andrew Lunn <andrew@lunn.ch>
To: Heiner Kallweit <hkallweit1@gmail.com>
To: Jakub Kicinski <kuba@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

 drivers/net/phy/spi_ks8995.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c
index 4b198399bfa2..3c6c87a09b03 100644
--- a/drivers/net/phy/spi_ks8995.c
+++ b/drivers/net/phy/spi_ks8995.c
@@ -491,7 +491,9 @@ static int ks8995_probe(struct spi_device *spi)
 
 	spi_set_drvdata(spi, ks);
 
-	spi->mode = SPI_MODE_0;
+	/* use SPI_MODE_0 without changing any other mode flags */
+	spi->mode &= ~(SPI_CPHA | SPI_CPOL);
+	spi->mode |= SPI_MODE_0;
 	spi->bits_per_word = 8;
 	err = spi_setup(spi);
 	if (err) {
-- 
2.17.1