[PATCH AUTOSEL 4.4 05/10] mac80211: fix use of skb payload instead of header

[PATCH AUTOSEL 4.4 05/10] mac80211: fix use of skb payload instead of header

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 14f46c1e5108696ec1e5a129e838ecedf108c7bf ]

When ieee80211_skb_resize() is called from ieee80211_build_hdr()
the skb has no 802.11 header yet, in fact it consist only of the
payload as the ethernet frame is removed. As such, we're using
the payload data for ieee80211_is_mgmt(), which is of course
completely wrong. This didn't really hurt us because these are
always data frames, so we could only have added more tailroom
than we needed if we determined it was a management frame and
sdata->crypto_tx_tailroom_needed_cnt was false.

However, syzbot found that of course there need not be any payload,
so we're using at best uninitialized memory for the check.

Fix this to pass explicitly the kind of frame that we have instead
of checking there, by replacing the "bool may_encrypt" argument
with an argument that can carry the three possible states - it's
not going to be encrypted, it's a management frame, or it's a data
frame (and then we check sdata->crypto_tx_tailroom_needed_cnt).

Reported-by: syzbot+32fd1a1bfe355e93f1e2@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20201009132538.e1fd7f802947.I799b288466ea2815f9d4c84349fae697dca2f189@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c | 35 +++++++++++++++++++++++------------
 1 file changed, 23 insertions(+), 12 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 98c34c3adf392..4466413c5eecc 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1594,19 +1594,24 @@ static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata,
 
 /* device xmit handlers */
 
+enum ieee80211_encrypt {
+	ENCRYPT_NO,
+	ENCRYPT_MGMT,
+	ENCRYPT_DATA,
+};
+
 static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata,
 				struct sk_buff *skb,
-				int head_need, bool may_encrypt)
+				int head_need,
+				enum ieee80211_encrypt encrypt)
 {
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_hdr *hdr;
 	bool enc_tailroom;
 	int tail_need = 0;
 
-	hdr = (struct ieee80211_hdr *) skb->data;
-	enc_tailroom = may_encrypt &&
-		       (sdata->crypto_tx_tailroom_needed_cnt ||
-			ieee80211_is_mgmt(hdr->frame_control));
+	enc_tailroom = encrypt == ENCRYPT_MGMT ||
+		       (encrypt == ENCRYPT_DATA &&
+			sdata->crypto_tx_tailroom_needed_cnt);
 
 	if (enc_tailroom) {
 		tail_need = IEEE80211_ENCRYPT_TAILROOM;
@@ -1639,21 +1644,27 @@ void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	int headroom;
-	bool may_encrypt;
+	enum ieee80211_encrypt encrypt;
 
-	may_encrypt = !(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT);
+	if (info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)
+		encrypt = ENCRYPT_NO;
+	else if (ieee80211_is_mgmt(hdr->frame_control))
+		encrypt = ENCRYPT_MGMT;
+	else
+		encrypt = ENCRYPT_DATA;
 
 	headroom = local->tx_headroom;
-	if (may_encrypt)
+	if (encrypt != ENCRYPT_NO)
 		headroom += sdata->encrypt_headroom;
 	headroom -= skb_headroom(skb);
 	headroom = max_t(int, 0, headroom);
 
-	if (ieee80211_skb_resize(sdata, skb, headroom, may_encrypt)) {
+	if (ieee80211_skb_resize(sdata, skb, headroom, encrypt)) {
 		ieee80211_free_txskb(&local->hw, skb);
 		return;
 	}
 
+	/* reload after potential resize */
 	hdr = (struct ieee80211_hdr *) skb->data;
 	info->control.vif = &sdata->vif;
 
@@ -2346,7 +2357,7 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
 		head_need += sdata->encrypt_headroom;
 		head_need += local->tx_headroom;
 		head_need = max_t(int, 0, head_need);
-		if (ieee80211_skb_resize(sdata, skb, head_need, true)) {
+		if (ieee80211_skb_resize(sdata, skb, head_need, ENCRYPT_DATA)) {
 			ieee80211_free_txskb(&local->hw, skb);
 			skb = NULL;
 			return ERR_PTR(-ENOMEM);
@@ -2756,7 +2767,7 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
 	if (unlikely(ieee80211_skb_resize(sdata, skb,
 					  max_t(int, extra_head + hw_headroom -
 						     skb_headroom(skb), 0),
-					  false))) {
+					  ENCRYPT_NO))) {
 		kfree_skb(skb);
 		return true;
 	}
-- 
2.27.0

[PATCH AUTOSEL 4.4 06/10] mac80211: always wind down STA state

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit dcd479e10a0510522a5d88b29b8f79ea3467d501 ]

When (for example) an IBSS station is pre-moved to AUTHORIZED
before it's inserted, and then the insertion fails, we don't
clean up the fast RX/TX states that might already have been
created, since we don't go through all the state transitions
again on the way down.

Do that, if it hasn't been done already, when the station is
freed. I considered only freeing the fast TX/RX state there,
but we might add more state so it's more robust to wind down
the state properly.

Note that we warn if the station was ever inserted, it should
have been properly cleaned up in that case, and the driver
will probably not like things happening out of order.

Reported-by: syzbot+2e293dbd67de2836ba42@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201009141710.7223b322a955.I95bd08b9ad0e039c034927cce0b75beea38e059b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/sta_info.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index bbddab248c489..6f7c3f6a5027b 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -242,6 +242,24 @@ struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
  */
 void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
 {
+	/*
+	 * If we had used sta_info_pre_move_state() then we might not
+	 * have gone through the state transitions down again, so do
+	 * it here now (and warn if it's inserted).
+	 *
+	 * This will clear state such as fast TX/RX that may have been
+	 * allocated during state transitions.
+	 */
+	while (sta->sta_state > IEEE80211_STA_NONE) {
+		int ret;
+
+		WARN_ON_ONCE(test_sta_flag(sta, WLAN_STA_INSERTED));
+
+		ret = sta_info_move_state(sta, sta->sta_state - 1);
+		if (WARN_ONCE(ret, "sta_info_move_state() returned %d\n", ret))
+			break;
+	}
+
 	if (sta->rate_ctrl)
 		rate_control_free_sta(sta);
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 07/10] cfg80211: regulatory: Fix inconsistent format argument

[Sasha Levin]

From: Ye Bin <yebin10@huawei.com>

[ Upstream commit db18d20d1cb0fde16d518fb5ccd38679f174bc04 ]

Fix follow warning:
[net/wireless/reg.c:3619]: (warning) %d in format string (no. 2)
requires 'int' but the argument type is 'unsigned int'.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20201009070215.63695-1-yebin10@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 474923175b108..dcbf5cd44bb37 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2775,7 +2775,7 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd)
 		power_rule = &reg_rule->power_rule;
 
 		if (reg_rule->flags & NL80211_RRF_AUTO_BW)
-			snprintf(bw, sizeof(bw), "%d KHz, %d KHz AUTO",
+			snprintf(bw, sizeof(bw), "%d KHz, %u KHz AUTO",
 				 freq_range->max_bandwidth_khz,
 				 reg_get_max_bandwidth(rd, reg_rule));
 		else
-- 
2.27.0