[PATCH] net: ftgmac100: Fix crash when removing driver

[PATCH] net: ftgmac100: Fix crash when removing driver

[Joel Stanley]

When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific))
in net/core/dev.c due to still having the NC-SI packet handler
registered.

 # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind
  ------------[ cut here ]------------
  kernel BUG at net/core/dev.c:10254!
  Internal error: Oops - BUG: 0 [#1] SMP ARM
  CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46
  Hardware name: Generic DT based system
  PC is at netdev_run_todo+0x314/0x394
  LR is at cpumask_next+0x20/0x24
  pc : [<806f5830>]    lr : [<80863cb0>]    psr: 80000153
  sp : 855bbd58  ip : 00000001  fp : 855bbdac
  r10: 80c03d00  r9 : 80c06228  r8 : 81158c54
  r7 : 00000000  r6 : 80c05dec  r5 : 80c05d18  r4 : 813b9280
  r3 : 813b9054  r2 : 8122c470  r1 : 00000002  r0 : 00000002
  Flags: Nzcv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment none
  Control: 00c5387d  Table: 85514008  DAC: 00000051
  Process sh (pid: 115, stack limit = 0x7cb5703d)
 ...
  Backtrace:
  [<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c)
   r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410
   r4:813b9000
  [<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30)
  [<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8)
   r5:8115b410 r4:813b9000
  [<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c)

Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 983b6db2d80d..4edccba5e2a8 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1945,6 +1945,8 @@ static int ftgmac100_remove(struct platform_device *pdev)
 	netdev = platform_get_drvdata(pdev);
 	priv = netdev_priv(netdev);
 
+	if (priv->ndev)
+		ncsi_unregister_dev(priv->ndev);
 	unregister_netdev(netdev);
 
 	clk_disable_unprepare(priv->rclk);
-- 
2.28.0

Re: [PATCH] net: ftgmac100: Fix crash when removing driver

[Jakub Kicinski]

On Thu, 12 Nov 2020 11:01:45 +1030 Joel Stanley wrote:
> When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific))
> in net/core/dev.c due to still having the NC-SI packet handler
> registered.

> Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
> Signed-off-by: Joel Stanley <joel@jms.id.au>

Thanks for the fix, I think there is another one of those missing in 
the error path of ftgmac100_probe(), right?  Under err_ncsi_dev?

Re: [PATCH] net: ftgmac100: Fix crash when removing driver

[Joel Stanley]

On Thu, 12 Nov 2020 at 23:22, Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Thu, 12 Nov 2020 11:01:45 +1030 Joel Stanley wrote:
> > When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific))
> > in net/core/dev.c due to still having the NC-SI packet handler
> > registered.
>
> > Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
> > Signed-off-by: Joel Stanley <joel@jms.id.au>
>
> Thanks for the fix, I think there is another one of those missing in
> the error path of ftgmac100_probe(), right?  Under err_ncsi_dev?

You're correct, I'll send a v2.