From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de
Subject: pull-request: can 2020-11-14
Date: Sat, 14 Nov 2020 18:33:44 +0100 [thread overview]
Message-ID: <20201114173358.2058600-1-mkl@pengutronix.de> (raw)
Hello Jakub, hello David,
here's a pull request for net/master consisting of 15 patches for net/master.
Anant Thazhemadam contributed two patches for the AF_CAN that prevent potential
access of uninitialized member in can_rcv() and canfd_rcv().
The next patch is by Alejandro Concepcion Rodriguez and changes can_restart()
to use the correct function to push a skb into the networking stack from
process context.
Zhang Qilong's patch fixes a memory leak in the error path of the ti_hecc's
probe function.
A patch by me fixes mcba_usb_start_xmit() function in the mcba_usb driver, to
first fill the skb and then pass it to can_put_echo_skb().
Colin Ian King's patch fixes a potential integer overflow on shift in the
peak_usb driver.
The next two patches target the flexcan driver, a patch by me adds the missing
"req_bit" to the stop mode property comment (which was broken during net-next
for v5.10). Zhang Qilong's patch fixes the failure handling of
pm_runtime_get_sync().
The next seven patches target the m_can driver including the tcan4x5x spi
driver glue code. Enric Balletbo i Serra's patch for the tcan4x5x Kconfig fix
the REGMAP_SPI dependency handling. A patch by me for the tcan4x5x driver's
probe() function adds missing error handling to for devm_regmap_init(), and in
tcan4x5x_can_remove() the order of deregistration is fixed. Wu Bo's patch for
the m_can driver fixes the state change handling in
m_can_handle_state_change(). Two patches by Dan Murphy first introduce
m_can_class_free_dev() and then make use of it to fix the freeing of the can
device. A patch by Faiz Abbas add a missing shutdown of the CAN controller in
the m_can_stop() function.
regards,
Marc
---
The following changes since commit ceb736e1d45c253f5e86b185ca9b497cdd43063f:
ipv6: Fix error path to cancel the meseage (2020-11-13 18:20:00 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git tags/linux-can-fixes-for-5.10-20201114
for you to fetch changes up to 9a7e716d475eb29213117d2e501b841050c4b511:
can: m_can: m_can_stop(): set device to software init mode before closing (2020-11-14 18:21:51 +0100)
----------------------------------------------------------------
linux-can-fixes-for-5.10-20201114
----------------------------------------------------------------
Alejandro Concepcion Rodriguez (1):
can: dev: can_restart(): post buffer from the right context
Anant Thazhemadam (2):
can: af_can: prevent potential access of uninitialized member in can_rcv()
can: af_can: prevent potential access of uninitialized member in canfd_rcv()
Colin Ian King (1):
can: peak_usb: fix potential integer overflow on shift of a int
Dan Murphy (2):
can: m_can: m_can_class_free_dev(): introduce new function
can: m_can: Fix freeing of can device from peripherials
Enric Balletbo i Serra (1):
can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPI
Faiz Abbas (1):
can: m_can: m_can_stop(): set device to software init mode before closing
Marc Kleine-Budde (4):
can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb()
can: flexcan: flexcan_setup_stop_mode(): add missing "req_bit" to stop mode property comment
can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for devm_regmap_init()
can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistration
Wu Bo (1):
can: m_can: m_can_handle_state_change(): fix state change
Zhang Qilong (2):
can: ti_hecc: Fix memleak in ti_hecc_probe
can: flexcan: fix failure handling of pm_runtime_get_sync()
drivers/net/can/dev.c | 2 +-
drivers/net/can/flexcan.c | 10 +++++---
drivers/net/can/m_can/Kconfig | 3 ++-
drivers/net/can/m_can/m_can.c | 16 ++++++++----
drivers/net/can/m_can/m_can.h | 1 +
drivers/net/can/m_can/m_can_platform.c | 23 +++++++++++------
drivers/net/can/m_can/tcan4x5x.c | 32 ++++++++++++++++-------
drivers/net/can/ti_hecc.c | 13 ++++++----
drivers/net/can/usb/mcba_usb.c | 4 +--
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 4 +--
net/can/af_can.c | 38 ++++++++++++++++++++--------
11 files changed, 100 insertions(+), 46 deletions(-)
next reply other threads:[~2020-11-14 17:34 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-14 17:33 Marc Kleine-Budde [this message]
2020-11-14 17:33 ` [net 01/15] can: af_can: prevent potential access of uninitialized member in can_rcv() Marc Kleine-Budde
2020-11-14 17:33 ` [net 02/15] can: af_can: prevent potential access of uninitialized member in canfd_rcv() Marc Kleine-Budde
2020-11-14 17:33 ` [net 03/15] can: dev: can_restart(): post buffer from the right context Marc Kleine-Budde
2020-11-14 17:33 ` [net 04/15] can: ti_hecc: Fix memleak in ti_hecc_probe Marc Kleine-Budde
2020-11-14 17:33 ` [net 05/15] can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb() Marc Kleine-Budde
2020-11-14 17:33 ` [net 06/15] can: peak_usb: fix potential integer overflow on shift of a int Marc Kleine-Budde
2020-11-14 17:33 ` [net 07/15] can: flexcan: flexcan_setup_stop_mode(): add missing "req_bit" to stop mode property comment Marc Kleine-Budde
2020-11-14 17:33 ` [net 08/15] can: flexcan: fix failure handling of pm_runtime_get_sync() Marc Kleine-Budde
2020-11-14 17:33 ` [net 09/15] can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPI Marc Kleine-Budde
2020-11-14 17:33 ` [net 10/15] can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for devm_regmap_init() Marc Kleine-Budde
2020-11-14 17:33 ` [net 11/15] can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistration Marc Kleine-Budde
2020-11-14 17:33 ` [net 12/15] can: m_can: m_can_handle_state_change(): fix state change Marc Kleine-Budde
2020-11-14 17:33 ` [net 13/15] can: m_can: m_can_class_free_dev(): introduce new function Marc Kleine-Budde
2020-11-14 17:33 ` [net 14/15] can: m_can: Fix freeing of can device from peripherials Marc Kleine-Budde
2020-11-14 17:33 ` [net 15/15] can: m_can: m_can_stop(): set device to software init mode before closing Marc Kleine-Budde
2020-11-15 1:35 ` pull-request: can 2020-11-14 Jakub Kicinski
2020-11-15 1:39 ` Jakub Kicinski
2020-11-15 16:58 ` Marc Kleine-Budde
2020-11-15 18:00 ` Marc Kleine-Budde
2020-11-16 15:33 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201114173358.2058600-1-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).