netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: DENG Qingfang <dqfext@gmail.com>
To: netdev@vger.kernel.org, linux-mediatek@lists.infradead.org,
	Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Russell King <linux@armlinux.org.uk>
Cc: Frank Wunderlich <frank-w@public-files.de>
Subject: [PATCH net-next] net: dsa: mt7530: support setting ageing time
Date: Tue,  8 Dec 2020 15:00:28 +0800	[thread overview]
Message-ID: <20201208070028.3177-1-dqfext@gmail.com> (raw)

MT7530 has a global address age control register, so use it to set
ageing time.

The applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/dsa/mt7530.c | 41 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mt7530.h | 13 +++++++++++++
 2 files changed, 54 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 6408402a44f5..99bf8fed6536 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -870,6 +870,46 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset)
 	return ARRAY_SIZE(mt7530_mib);
 }
 
+static int
+mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
+{
+	struct mt7530_priv *priv = ds->priv;
+	unsigned int secs = msecs / 1000;
+	unsigned int tmp_age_count;
+	unsigned int error = -1;
+	unsigned int age_count;
+	unsigned int age_unit;
+
+	/* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */
+	if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1))
+		return -ERANGE;
+
+	/* iterate through all possible age_count to find the closest pair */
+	for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) {
+		unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1;
+
+		if (tmp_age_unit <= AGE_UNIT_MAX) {
+			unsigned int tmp_error = secs -
+				(tmp_age_count + 1) * (tmp_age_unit + 1);
+
+			/* found a closer pair */
+			if (error > tmp_error) {
+				error = tmp_error;
+				age_count = tmp_age_count;
+				age_unit = tmp_age_unit;
+			}
+
+			/* found the exact match, so break the loop */
+			if (!error)
+				break;
+		}
+	}
+
+	mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit));
+
+	return 0;
+}
+
 static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 {
 	struct mt7530_priv *priv = ds->priv;
@@ -2564,6 +2604,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
 	.phy_write		= mt753x_phy_write,
 	.get_ethtool_stats	= mt7530_get_ethtool_stats,
 	.get_sset_count		= mt7530_get_sset_count,
+	.set_ageing_time	= mt7530_set_ageing_time,
 	.port_enable		= mt7530_port_enable,
 	.port_disable		= mt7530_port_disable,
 	.port_change_mtu	= mt7530_port_change_mtu,
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ee3523a7537e..32d8969b3ace 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -161,6 +161,19 @@ enum mt7530_vlan_egress_attr {
 	MT7530_VLAN_EGRESS_STACK = 3,
 };
 
+/* Register for address age control */
+#define MT7530_AAC			0xa0
+/* Disable ageing */
+#define  AGE_DIS			BIT(20)
+/* Age count */
+#define  AGE_CNT_MASK			GENMASK(19, 12)
+#define  AGE_CNT_MAX			0xff
+#define  AGE_CNT(x)			(AGE_CNT_MASK & ((x) << 12))
+/* Age unit */
+#define  AGE_UNIT_MASK			GENMASK(11, 0)
+#define  AGE_UNIT_MAX			0xfff
+#define  AGE_UNIT(x)			(AGE_UNIT_MASK & (x))
+
 /* Register for port STP state control */
 #define MT7530_SSP_P(x)			(0x2000 + ((x) * 0x100))
 #define  FID_PST(x)			((x) & 0x3)
-- 
2.25.1


             reply	other threads:[~2020-12-08  7:01 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-08  7:00 DENG Qingfang [this message]
2020-12-08 14:17 ` [PATCH net-next] net: dsa: mt7530: support setting ageing time Andrew Lunn
2020-12-08 20:56 ` Vladimir Oltean
2020-12-08 21:19   ` Vladimir Oltean
2020-12-08 22:01 ` Florian Fainelli
2020-12-09  0:19 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201208070028.3177-1-dqfext@gmail.com \
    --to=dqfext@gmail.com \
    --cc=Landen.Chao@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=frank-w@public-files.de \
    --cc=kuba@kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=sean.wang@mediatek.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).