netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sven Van Asbroeck <thesven73@gmail.com>
To: Bryan Whitehead <bryan.whitehead@microchip.com>,
	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
	David S Miller <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Sven Van Asbroeck <thesven73@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net v2] lan743x: fix rx_napi_poll/interrupt ping-pong
Date: Wed,  9 Dec 2020 22:55:40 -0500	[thread overview]
Message-ID: <20201210035540.32530-1-TheSven73@gmail.com> (raw)

From: Sven Van Asbroeck <thesven73@gmail.com>

Even if there is more rx data waiting on the chip, the rx napi poll fn
will never run more than once - it will always read a few buffers, then
bail out and re-arm interrupts. Which results in ping-pong between napi
and interrupt.

This defeats the purpose of napi, and is bad for performance.

Fix by making the rx napi poll behave identically to other ethernet
drivers:
1. initialize rx napi polling with an arbitrary budget (64).
2. in the polling fn, return full weight if rx queue is not depleted,
   this tells the napi core to "keep polling".
3. update the rx tail ("ring the doorbell") once for every 8 processed
   rx ring buffers.

Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert
opinions and suggestions.

Tested with 20 seconds of full bandwidth receive (iperf3):
        rx irqs      softirqs(NET_RX)
        -----------------------------
before  23827        33620
after   129          4081

Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430
Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
---

Tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git # b7e4ba9a91df

To: Bryan Whitehead <bryan.whitehead@microchip.com>
To: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
To: "David S. Miller" <davem@davemloft.net>
To: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

 drivers/net/ethernet/microchip/lan743x_main.c | 44 ++++++++++---------
 1 file changed, 23 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 87b6c59a1e03..30ec308b9a4c 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1964,6 +1964,14 @@ static struct sk_buff *lan743x_rx_allocate_skb(struct lan743x_rx *rx)
 				  length, GFP_ATOMIC | GFP_DMA);
 }
 
+static void lan743x_rx_update_tail(struct lan743x_rx *rx, int index)
+{
+	/* update the tail once per 8 descriptors */
+	if ((index & 7) == 7)
+		lan743x_csr_write(rx->adapter, RX_TAIL(rx->channel_number),
+				  index);
+}
+
 static int lan743x_rx_init_ring_element(struct lan743x_rx *rx, int index,
 					struct sk_buff *skb)
 {
@@ -1994,6 +2002,7 @@ static int lan743x_rx_init_ring_element(struct lan743x_rx *rx, int index,
 	descriptor->data0 = (RX_DESC_DATA0_OWN_ |
 			    (length & RX_DESC_DATA0_BUF_LENGTH_MASK_));
 	skb_reserve(buffer_info->skb, RX_HEAD_PADDING);
+	lan743x_rx_update_tail(rx, index);
 
 	return 0;
 }
@@ -2012,6 +2021,7 @@ static void lan743x_rx_reuse_ring_element(struct lan743x_rx *rx, int index)
 	descriptor->data0 = (RX_DESC_DATA0_OWN_ |
 			    ((buffer_info->buffer_length) &
 			    RX_DESC_DATA0_BUF_LENGTH_MASK_));
+	lan743x_rx_update_tail(rx, index);
 }
 
 static void lan743x_rx_release_ring_element(struct lan743x_rx *rx, int index)
@@ -2223,34 +2233,26 @@ static int lan743x_rx_napi_poll(struct napi_struct *napi, int weight)
 	struct lan743x_rx *rx = container_of(napi, struct lan743x_rx, napi);
 	struct lan743x_adapter *adapter = rx->adapter;
 	u32 rx_tail_flags = 0;
-	int count;
+	int count, result;
 
 	if (rx->vector_flags & LAN743X_VECTOR_FLAG_SOURCE_STATUS_W2C) {
 		/* clear int status bit before reading packet */
 		lan743x_csr_write(adapter, DMAC_INT_STS,
 				  DMAC_INT_BIT_RXFRM_(rx->channel_number));
 	}
-	count = 0;
-	while (count < weight) {
-		int rx_process_result = lan743x_rx_process_packet(rx);
-
-		if (rx_process_result == RX_PROCESS_RESULT_PACKET_RECEIVED) {
-			count++;
-		} else if (rx_process_result ==
-			RX_PROCESS_RESULT_NOTHING_TO_DO) {
+	for (count = 0; count < weight; count++) {
+		result = lan743x_rx_process_packet(rx);
+		if (result == RX_PROCESS_RESULT_NOTHING_TO_DO)
 			break;
-		} else if (rx_process_result ==
-			RX_PROCESS_RESULT_PACKET_DROPPED) {
-			continue;
-		}
 	}
 	rx->frame_count += count;
-	if (count == weight)
-		goto done;
+	if (count == weight || result == RX_PROCESS_RESULT_PACKET_RECEIVED)
+		return weight;
 
 	if (!napi_complete_done(napi, count))
-		goto done;
+		return count;
 
+	/* re-arm interrupts, must write to rx tail on some chip variants */
 	if (rx->vector_flags & LAN743X_VECTOR_FLAG_VECTOR_ENABLE_AUTO_SET)
 		rx_tail_flags |= RX_TAIL_SET_TOP_INT_VEC_EN_;
 	if (rx->vector_flags & LAN743X_VECTOR_FLAG_SOURCE_ENABLE_AUTO_SET) {
@@ -2260,10 +2262,10 @@ static int lan743x_rx_napi_poll(struct napi_struct *napi, int weight)
 				  INT_BIT_DMA_RX_(rx->channel_number));
 	}
 
-	/* update RX_TAIL */
-	lan743x_csr_write(adapter, RX_TAIL(rx->channel_number),
-			  rx_tail_flags | rx->last_tail);
-done:
+	if (rx_tail_flags)
+		lan743x_csr_write(adapter, RX_TAIL(rx->channel_number),
+				  rx_tail_flags | rx->last_tail);
+
 	return count;
 }
 
@@ -2407,7 +2409,7 @@ static int lan743x_rx_open(struct lan743x_rx *rx)
 
 	netif_napi_add(adapter->netdev,
 		       &rx->napi, lan743x_rx_napi_poll,
-		       rx->ring_size - 1);
+		       64);
 
 	lan743x_csr_write(adapter, DMAC_CMD,
 			  DMAC_CMD_RX_SWR_(rx->channel_number));
-- 
2.17.1


             reply	other threads:[~2020-12-10  3:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-10  3:55 Sven Van Asbroeck [this message]
2020-12-10  7:32 ` [PATCH net v2] lan743x: fix rx_napi_poll/interrupt ping-pong Heiner Kallweit
2020-12-11 12:43   ` Sven Van Asbroeck
2020-12-11 12:50     ` Heiner Kallweit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201210035540.32530-1-TheSven73@gmail.com \
    --to=thesven73@gmail.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=bryan.whitehead@microchip.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).