[PATCH AUTOSEL 4.19 5/9] vxlan: Add needed_headroom for lower device

[PATCH AUTOSEL 4.19 5/9] vxlan: Add needed_headroom for lower device

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 0a35dc41fea67ac4495ce7584406bf9557a6e7d0 ]

It was observed that sending data via batadv over vxlan (on top of
wireguard) reduced the performance massively compared to raw ethernet or
batadv on raw ethernet. A check of perf data showed that the
vxlan_build_skb was calling all the time pskb_expand_head to allocate
enough headroom for:

  min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len
  		+ VXLAN_HLEN + iphdr_len;

But the vxlan_config_apply only requested needed headroom for:

  lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM

So it completely ignored the needed_headroom of the lower device. The first
caller of net_dev_xmit could therefore never make sure that enough headroom
was allocated for the rest of the transmit path.

Cc: Annika Wickert <annika.wickert@exaring.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Annika Wickert <aw@awlnx.space>
Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index abf85f0ab72fc..8481a21fe7afb 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3180,6 +3180,7 @@ static void vxlan_config_apply(struct net_device *dev,
 		dev->gso_max_segs = lowerdev->gso_max_segs;
 
 		needed_headroom = lowerdev->hard_header_len;
+		needed_headroom += lowerdev->needed_headroom;
 
 		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
 					   VXLAN_HEADROOM);
-- 
2.27.0

[PATCH AUTOSEL 4.19 6/9] vxlan: Copy needed_tailroom from lowerdev

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit a5e74021e84bb5eadf760aaf2c583304f02269be ]

While vxlan doesn't need any extra tailroom, the lowerdev might need it. In
that case, copy it over to reduce the chance for additional (re)allocations
in the transmit path.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 8481a21fe7afb..66fffbd64a33f 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3182,6 +3182,8 @@ static void vxlan_config_apply(struct net_device *dev,
 		needed_headroom = lowerdev->hard_header_len;
 		needed_headroom += lowerdev->needed_headroom;
 
+		dev->needed_tailroom = lowerdev->needed_tailroom;
+
 		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
 					   VXLAN_HEADROOM);
 		if (max_mtu < ETH_MIN_MTU)
-- 
2.27.0