[PATCH AUTOSEL 4.4 03/38] staging: wimax: depends on NET

[PATCH AUTOSEL 4.4 03/38] staging: wimax: depends on NET

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 9364a2cf567187c0a075942c22d1f434c758de5d ]

Fix build errors when CONFIG_NET is not enabled. E.g. (trimmed):

ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_alloc':
op-msg.c:(.text+0xa9): undefined reference to `__alloc_skb'
ld: op-msg.c:(.text+0xcc): undefined reference to `genlmsg_put'
ld: op-msg.c:(.text+0xfc): undefined reference to `nla_put'
ld: op-msg.c:(.text+0x168): undefined reference to `kfree_skb'
ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_data_len':
op-msg.c:(.text+0x1ba): undefined reference to `nla_find'
ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_send':
op-msg.c:(.text+0x311): undefined reference to `init_net'
ld: op-msg.c:(.text+0x326): undefined reference to `netlink_broadcast'
ld: drivers/staging/wimax/stack.o: in function `__wimax_state_change':
stack.c:(.text+0x433): undefined reference to `netif_carrier_off'
ld: stack.c:(.text+0x46b): undefined reference to `netif_carrier_on'
ld: stack.c:(.text+0x478): undefined reference to `netif_tx_wake_queue'
ld: drivers/staging/wimax/stack.o: in function `wimax_subsys_exit':
stack.c:(.exit.text+0xe): undefined reference to `genl_unregister_family'
ld: drivers/staging/wimax/stack.o: in function `wimax_subsys_init':
stack.c:(.init.text+0x1a): undefined reference to `genl_register_family'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: netdev@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201102072456.20303-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wimax/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig
index e4d97ab476d58..945bdf4738eb6 100644
--- a/net/wimax/Kconfig
+++ b/net/wimax/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig WIMAX
 	tristate "WiMAX Wireless Broadband support"
+	depends on NET
 	depends on RFKILL || !RFKILL
 	help
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 11/38] Bluetooth: hidp: use correct wait queue when removing ctrl_wait

[Sasha Levin]

From: Ole Bjørn Midtbø <omidtbo@cisco.com>

[ Upstream commit cca342d98bef68151a80b024f7bf5f388d1fbdea ]

A different wait queue was used when removing ctrl_wait than when adding
it. This effectively made the remove operation without locking compared
to other operations on the wait queue ctrl_wait was part of. This caused
issues like below where dead000000000100 is LIST_POISON1 and
dead000000000200 is LIST_POISON2.

 list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \
	but was dead000000000200. (next=ffffffc03ac77de0).
 ------------[ cut here ]------------
 CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G           O    4.4.238+ #9
 ...
 ---[ end trace 0adc2158f0646eac ]---
 Call trace:
 [<ffffffc000443f78>] __list_add+0x38/0xb0
 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68
 [<ffffffc00020eecc>] __pollwait+0xec/0x100
 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200
 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128
 [<ffffffc000210378>] do_sys_poll+0x220/0x480
 [<ffffffc0002106f0>] SyS_poll+0x80/0x138
 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4

 Unable to handle kernel paging request at virtual address dead000000000100
 ...
 CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G        W  O    4.4.238+ #9
 ...
 Call trace:
  [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8
  [<ffffffc0000f0818>] __wake_up+0x50/0x70
  [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60
  [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224
  [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298
  [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198
  [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78
  [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30
  [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360
  [<ffffffc0000c2218>] process_one_work+0x268/0x460
  [<ffffffc0000c2678>] worker_thread+0x268/0x480
  [<ffffffc0000c94e0>] kthread+0x118/0x128
  [<ffffffc000085070>] ret_from_fork+0x10/0x20
  ---[ end trace 0adc2158f0646ead ]---

Signed-off-by: Ole Bjørn Midtbø <omidtbo@cisco.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hidp/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 552e00b07196e..9ec37c6c8c4aa 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -1282,7 +1282,7 @@ static int hidp_session_thread(void *arg)
 
 	/* cleanup runtime environment */
 	remove_wait_queue(sk_sleep(session->intr_sock->sk), &intr_wait);
-	remove_wait_queue(sk_sleep(session->intr_sock->sk), &ctrl_wait);
+	remove_wait_queue(sk_sleep(session->ctrl_sock->sk), &ctrl_wait);
 	wake_up_interruptible(&session->report_queue);
 	hidp_del_timer(session);
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 12/38] net: skb_vlan_untag(): don't reset transport offset if set by GRO layer

[Sasha Levin]

From: Alexander Lobakin <alobakin@pm.me>

[ Upstream commit 8be33ecfc1ffd2da20cc29e957e4cb6eb99310cb ]

Similar to commit fda55eca5a33f
("net: introduce skb_transport_header_was_set()"), avoid resetting
transport offsets that were already set by GRO layer. This not only
mirrors the behavior of __netif_receive_skb_core(), but also makes
sense when it comes to UDP GSO fraglists forwarding: transport offset
of such skbs is set only once by GRO receive callback and remains
untouched and correct up to the xmitting driver in 1:1 case, but
becomes junk after untagging in ingress VLAN case and breaks UDP
GSO offload. This does not happen after this change, and all types
of forwarding of UDP GSO fraglists work as expected.

Since v1 [1]:
 - keep the code 1:1 with __netif_receive_skb_core() (Jakub).

[1] https://lore.kernel.org/netdev/zYurwsZRN7BkqSoikWQLVqHyxz18h4LhHU4NFa2Vw@cp4-web-038.plabs.ch

Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/7JgIkgEztzt0W6ZtC9V9Cnk5qfkrUFYcpN871syCi8@cp4-web-040.plabs.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index e87ec3659ef61..c3993afc32e2c 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4386,7 +4386,8 @@ struct sk_buff *skb_vlan_untag(struct sk_buff *skb)
 		goto err_free;
 
 	skb_reset_network_header(skb);
-	skb_reset_transport_header(skb);
+	if (!skb_transport_header_was_set(skb))
+		skb_reset_transport_header(skb);
 	skb_reset_mac_len(skb);
 
 	return skb;
-- 
2.27.0

[PATCH AUTOSEL 4.4 21/38] rxrpc: Don't leak the service-side session key to userspace

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit d2ae4e918218f543214fbd906db68a6c580efbbb ]

Don't let someone reading a service-side rxrpc-type key get access to the
session key that was exchanged with the client.  The server application
will, at some point, need to be able to read the information in the ticket,
but this probably shouldn't include the key material.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/keys/rxrpc-type.h | 1 +
 net/rxrpc/ar-key.c        | 8 ++++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/include/keys/rxrpc-type.h b/include/keys/rxrpc-type.h
index fc48754338179..5bd32114a51ad 100644
--- a/include/keys/rxrpc-type.h
+++ b/include/keys/rxrpc-type.h
@@ -88,6 +88,7 @@ struct rxk5_key {
  */
 struct rxrpc_key_token {
 	u16	security_index;		/* RxRPC header security index */
+	bool	no_leak_key;		/* Don't copy the key to userspace */
 	struct rxrpc_key_token *next;	/* the next token in the list */
 	union {
 		struct rxkad_key *kad;
diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c
index ea615e53eab28..ab4e21ffb4de9 100644
--- a/net/rxrpc/ar-key.c
+++ b/net/rxrpc/ar-key.c
@@ -1081,7 +1081,8 @@ static long rxrpc_read(const struct key *key,
 		case RXRPC_SECURITY_RXKAD:
 			toksize += 8 * 4;	/* viceid, kvno, key*2, begin,
 						 * end, primary, tktlen */
-			toksize += RND(token->kad->ticket_len);
+			if (!token->no_leak_key)
+				toksize += RND(token->kad->ticket_len);
 			break;
 
 		case RXRPC_SECURITY_RXK5:
@@ -1190,7 +1191,10 @@ static long rxrpc_read(const struct key *key,
 			ENCODE(token->kad->start);
 			ENCODE(token->kad->expiry);
 			ENCODE(token->kad->primary_flag);
-			ENCODE_DATA(token->kad->ticket_len, token->kad->ticket);
+			if (token->no_leak_key)
+				ENCODE(0);
+			else
+				ENCODE_DATA(token->kad->ticket_len, token->kad->ticket);
 			break;
 
 		case RXRPC_SECURITY_RXK5:
-- 
2.27.0

[PATCH AUTOSEL 4.4 25/38] brcmsmac: ampdu: Check BA window size before checking block ack

[Sasha Levin]

From: Dmitry Safonov <dima@arista.com>

[ Upstream commit 01c195de620bb6c3ecda0dbf295fe685d8232e10 ]

bindex can be out of BA window (64):
  tid 0 seq 2983, start_seq 2915, bindex 68, index 39
  tid 0 seq 2984, start_seq 2915, bindex 69, index 40
  tid 0 seq 2985, start_seq 2915, bindex 70, index 41
  tid 0 seq 2986, start_seq 2915, bindex 71, index 42
  tid 0 seq 2879, start_seq 2915, bindex 4060, index 63
  tid 0 seq 2854, start_seq 2915, bindex 4035, index 38
  tid 0 seq 2795, start_seq 2915, bindex 3976, index 43
  tid 0 seq 2989, start_seq 2924, bindex 65, index 45
  tid 0 seq 2992, start_seq 2924, bindex 68, index 48
  tid 0 seq 2993, start_seq 2924, bindex 69, index 49
  tid 0 seq 2994, start_seq 2924, bindex 70, index 50
  tid 0 seq 2997, start_seq 2924, bindex 73, index 53
  tid 0 seq 2795, start_seq 2941, bindex 3950, index 43
  tid 0 seq 2921, start_seq 2941, bindex 4076, index 41
  tid 0 seq 2929, start_seq 2941, bindex 4084, index 49
  tid 0 seq 3011, start_seq 2946, bindex 65, index 3
  tid 0 seq 3012, start_seq 2946, bindex 66, index 4
  tid 0 seq 3013, start_seq 2946, bindex 67, index 5

In result isset() will try to dereference something on the stack,
causing panics:
  BUG: unable to handle page fault for address: ffffa742800ed01f
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 6a4e9067 P4D 6a4e9067 PUD 6a4ec067 PMD 6a4ed067 PTE 0
  Oops: 0000 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Not tainted 5.8.5-arch1-1-kdump #1
  Hardware name: Apple Inc. MacBookAir3,1/Mac-942452F5819B1C1B, BIOS    MBA31.88Z.0061.B07.1201241641 01/24/12
  RIP: 0010:brcms_c_ampdu_dotxstatus+0x343/0x9f0 [brcmsmac]
  Code: 54 24 20 66 81 e2 ff 0f 41 83 e4 07 89 d1 0f b7 d2 66 c1 e9 03 0f b7 c9 4c 8d 5c 0c 48 49 8b 4d 10 48 8b 79 68 41 57 44 89 e1 <41> 0f b6 33 41 d3 e0 48 c7 c1 38 e0 ea c0 48 83 c7 10 44 21 c6 4c
  RSP: 0018:ffffa742800ecdd0 EFLAGS: 00010207
  RAX: 0000000000000019 RBX: 000000000000000b RCX: 0000000000000006
  RDX: 0000000000000ffe RSI: 0000000000000004 RDI: ffff8fc6ad776800
  RBP: ffff8fc6855acb00 R08: 0000000000000001 R09: 00000000000005d9
  R10: 00000000fffffffe R11: ffffa742800ed01f R12: 0000000000000006
  R13: ffff8fc68d75a000 R14: 00000000000005db R15: 0000000000000019
  FS:  0000000000000000(0000) GS:ffff8fc6aad00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffa742800ed01f CR3: 000000002480a000 CR4: 00000000000406e0
  Call Trace:
   <IRQ>
   brcms_c_dpc+0xb46/0x1020 [brcmsmac]
   ? wlc_intstatus+0xc8/0x180 [brcmsmac]
   ? __raise_softirq_irqoff+0x1a/0x80
   brcms_dpc+0x37/0xd0 [brcmsmac]
   tasklet_action_common.constprop.0+0x51/0xb0
   __do_softirq+0xff/0x340
   ? handle_level_irq+0x1a0/0x1a0
   asm_call_on_stack+0x12/0x20
   </IRQ>
   do_softirq_own_stack+0x5f/0x80
   irq_exit_rcu+0xcb/0x120
   common_interrupt+0xd1/0x200
   asm_common_interrupt+0x1e/0x40
  RIP: 0010:cpuidle_enter_state+0xb3/0x420

Check if the block is within BA window and only then check block's
status. Otherwise as Behan wrote: "When I came back to Dublin I
was courtmartialed in my absence and sentenced to death in my absence,
so I said they could shoot me in my absence."

Also reported:
https://bbs.archlinux.org/viewtopic.php?id=258428
https://lore.kernel.org/linux-wireless/87tuwgi92n.fsf@yujinakao.com/

Reported-by: Yuji Nakao <contact@yujinakao.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201116030635.645811-1-dima@arista.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/brcm80211/brcmsmac/ampdu.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
index fa391e4eb0989..44f65b8bff9e0 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
@@ -953,14 +953,19 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
 		index = TX_SEQ_TO_INDEX(seq);
 		ack_recd = false;
 		if (ba_recd) {
+			int block_acked;
+
 			bindex = MODSUB_POW2(seq, start_seq, SEQNUM_MAX);
+			if (bindex < AMPDU_TX_BA_MAX_WSIZE)
+				block_acked = isset(bitmap, bindex);
+			else
+				block_acked = 0;
 			brcms_dbg_ht(wlc->hw->d11core,
 				     "tid %d seq %d, start_seq %d, bindex %d set %d, index %d\n",
 				     tid, seq, start_seq, bindex,
-				     isset(bitmap, bindex), index);
+				     block_acked, index);
 			/* if acked then clear bit and free packet */
-			if ((bindex < AMPDU_TX_BA_MAX_WSIZE)
-			    && isset(bitmap, bindex)) {
+			if (block_acked) {
 				ini->txretry[index] = 0;
 
 				/*
-- 
2.27.0

[PATCH AUTOSEL 4.4 29/38] net/lapb: fix t1 timer handling for LAPB_STATE_0

[Sasha Levin]

From: Martin Schiller <ms@dev.tdt.de>

[ Upstream commit 62480b992ba3fb1d7260b11293aed9d6557831c7 ]

1. DTE interface changes immediately to LAPB_STATE_1 and start sending
   SABM(E).

2. DCE interface sends N2-times DM and changes to LAPB_STATE_1
   afterwards if there is no response in the meantime.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/lapb/lapb_timer.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/lapb/lapb_timer.c b/net/lapb/lapb_timer.c
index 355cc3b6fa4d3..3d99205f003da 100644
--- a/net/lapb/lapb_timer.c
+++ b/net/lapb/lapb_timer.c
@@ -92,11 +92,18 @@ static void lapb_t1timer_expiry(unsigned long param)
 	switch (lapb->state) {
 
 		/*
-		 *	If we are a DCE, keep going DM .. DM .. DM
+		 *	If we are a DCE, send DM up to N2 times, then switch to
+		 *	STATE_1 and send SABM(E).
 		 */
 		case LAPB_STATE_0:
-			if (lapb->mode & LAPB_DCE)
+			if (lapb->mode & LAPB_DCE &&
+			    lapb->n2count != lapb->n2) {
+				lapb->n2count++;
 				lapb_send_control(lapb, LAPB_DM, LAPB_POLLOFF, LAPB_RESPONSE);
+			} else {
+				lapb->state = LAPB_STATE_1;
+				lapb_establish_data_link(lapb);
+			}
 			break;
 
 		/*
-- 
2.27.0

[PATCH AUTOSEL 4.4 31/38] mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start

[Sasha Levin]

From: Zhang Xiaohui <ruc_zhangxiaohui@163.com>

[ Upstream commit 5c455c5ab332773464d02ba17015acdca198f03d ]

mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().

Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mwifiex/join.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 6378dfd3b4e86..83b7cd5bdf930 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -856,6 +856,8 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
 
 	memset(adhoc_start->ssid, 0, IEEE80211_MAX_SSID_LEN);
 
+	if (req_ssid->ssid_len > IEEE80211_MAX_SSID_LEN)
+		req_ssid->ssid_len = IEEE80211_MAX_SSID_LEN;
 	memcpy(adhoc_start->ssid, req_ssid->ssid, req_ssid->ssid_len);
 
 	mwifiex_dbg(adapter, INFO, "info: ADHOC_S_CMD: SSID = %s\n",
-- 
2.27.0

[PATCH AUTOSEL 4.4 33/38] iwlwifi: trans: consider firmware dead after errors

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 152fdc0f698896708f9d7889a4ba4da6944b74f7 ]

If we get an error, no longer consider the firmware to be
in IWL_TRANS_FW_ALIVE state.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a9d01e79c1c7.Ib2deb076b392fb516a7230bac91d7ab8a9586d86@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 6f76525088f0e..8dd30de1976f0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -1102,8 +1102,10 @@ static inline void iwl_trans_fw_error(struct iwl_trans *trans)
 		return;
 
 	/* prevent double restarts due to the same erroneous FW */
-	if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
+	if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status)) {
 		iwl_op_mode_nic_error(trans->op_mode);
+		trans->state = IWL_TRANS_NO_FW;
+	}
 }
 
 /*****************************************************
-- 
2.27.0

[PATCH AUTOSEL 4.4 34/38] iwlwifi: add an extra firmware state in the transport

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit b2ed841ed070ccbe908016537f429a3a8f0221bf ]

Start tracking not just if the firmware is dead or alive,
but also if it's starting.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.33e50d40b688.I8bbd41af7aa5e769273a6fc1c06fbf548dd2eb26@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 8dd30de1976f0..ea60143e60fa4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -619,12 +619,14 @@ struct iwl_trans_ops {
 /**
  * enum iwl_trans_state - state of the transport layer
  *
- * @IWL_TRANS_NO_FW: no fw has sent an alive response
- * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
+ * @IWL_TRANS_NO_FW: firmware wasn't started yet, or crashed
+ * @IWL_TRANS_FW_STARTED: FW was started, but not alive yet
+ * @IWL_TRANS_FW_ALIVE: FW has sent an alive response
  */
 enum iwl_trans_state {
-	IWL_TRANS_NO_FW = 0,
-	IWL_TRANS_FW_ALIVE	= 1,
+	IWL_TRANS_NO_FW,
+	IWL_TRANS_FW_STARTED,
+	IWL_TRANS_FW_ALIVE,
 };
 
 /**
@@ -780,12 +782,18 @@ static inline int iwl_trans_start_fw(struct iwl_trans *trans,
 				     const struct fw_img *fw,
 				     bool run_in_rfkill)
 {
+	int ret;
+
 	might_sleep();
 
 	WARN_ON_ONCE(!trans->rx_mpdu_cmd);
 
 	clear_bit(STATUS_FW_ERROR, &trans->status);
-	return trans->ops->start_fw(trans, fw, run_in_rfkill);
+	ret = trans->ops->start_fw(trans, fw, run_in_rfkill);
+	if (ret == 0)
+		trans->state = IWL_TRANS_FW_STARTED;
+
+	return ret;
 }
 
 static inline int iwl_trans_update_sf(struct iwl_trans *trans,
-- 
2.27.0

[PATCH AUTOSEL 4.4 35/38] mac80211: disallow band-switch during CSA

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 3660944a37ce73890292571f44f04891834f9044 ]

If the AP advertises a band switch during CSA, we will not have
the right information to continue working with it, since it will
likely (have to) change its capabilities and we don't track any
capability changes at all. Additionally, we store e.g. supported
rates per band, and that information would become invalid.

Since this is a fringe scenario, just disconnect explicitly.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.0e2327107c06.I461adb07704e056b054a4a7c29b80c95a9f56637@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4ab78bc6c2ca5..6a94b14817471 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1210,6 +1210,17 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 	if (res)
 		return;
 
+	if (sdata->vif.bss_conf.chandef.chan->band !=
+	    csa_ie.chandef.chan->band) {
+		sdata_info(sdata,
+			   "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
+			   ifmgd->associated->bssid,
+			   csa_ie.chandef.chan->center_freq,
+			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
+			   csa_ie.chandef.center_freq2);
+		goto lock_and_drop_connection;
+	}
+
 	if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
 				     IEEE80211_CHAN_DISABLED)) {
 		sdata_info(sdata,
@@ -1218,9 +1229,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 			   csa_ie.chandef.chan->center_freq,
 			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
 			   csa_ie.chandef.center_freq2);
-		ieee80211_queue_work(&local->hw,
-				     &ifmgd->csa_connection_drop_work);
-		return;
+		goto lock_and_drop_connection;
 	}
 
 	if (cfg80211_chandef_identical(&csa_ie.chandef,
@@ -1310,6 +1319,9 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 			  TU_TO_EXP_TIME((csa_ie.count - 1) *
 					 cbss->beacon_interval));
 	return;
+ lock_and_drop_connection:
+	mutex_lock(&local->mtx);
+	mutex_lock(&local->chanctx_mtx);
  drop_connection:
 	ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
 	mutex_unlock(&local->chanctx_mtx);
-- 
2.27.0

[PATCH AUTOSEL 4.4 36/38] mac80211: don't filter out beacons once we start CSA

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 189a164d0fc6c59a22c4486d641d0a0a0d33387a ]

I hit a bug in which we started a CSA with an action frame,
but the AP changed its mind and didn't change the beacon.
The CSA wasn't cancelled and we lost the connection.

The beacons were ignored because they never changed: they
never contained any CSA IE. Because they never changed, the
CRC of the beacon didn't change either which made us ignore
the beacons instead of processing them.

Now what happens is:
1) beacon has CRC X and it is valid. No CSA IE in the beacon
2) as long as beacon's CRC X, don't process their IEs
3) rx action frame with CSA
4) invalidate the beacon's CRC
5) rx beacon, CRC is still X, but now it is invalid
6) process the beacon, detect there is no CSA IE
7) abort CSA

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201206145305.83470b8407e6.I739b907598001362744692744be15335436b8351@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6a94b14817471..7b9766998c105 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1296,6 +1296,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 	sdata->csa_chandef = csa_ie.chandef;
 	sdata->csa_block_tx = csa_ie.mode;
 	ifmgd->csa_ignored_same_chan = false;
+	ifmgd->beacon_crc_valid = false;
 
 	if (sdata->csa_block_tx)
 		ieee80211_stop_vif_queues(local, sdata,
-- 
2.27.0

Re: [PATCH AUTOSEL 4.4 03/38] staging: wimax: depends on NET

[Jakub Kicinski]

On Tue, 22 Dec 2020 21:24:41 -0500 Sasha Levin wrote:
> From: Randy Dunlap <rdunlap@infradead.org>
> 
> [ Upstream commit 9364a2cf567187c0a075942c22d1f434c758de5d ]
> 
> Fix build errors when CONFIG_NET is not enabled. E.g. (trimmed):

This one can be dropped, before wimax moved to staging the dependency
was met thru the directory structure.

Re: [PATCH AUTOSEL 4.4 03/38] staging: wimax: depends on NET

[Sasha Levin]

On Tue, Dec 22, 2020 at 06:38:01PM -0800, Jakub Kicinski wrote:
>On Tue, 22 Dec 2020 21:24:41 -0500 Sasha Levin wrote:
>> From: Randy Dunlap <rdunlap@infradead.org>
>>
>> [ Upstream commit 9364a2cf567187c0a075942c22d1f434c758de5d ]
>>
>> Fix build errors when CONFIG_NET is not enabled. E.g. (trimmed):
>
>This one can be dropped, before wimax moved to staging the dependency
>was met thru the directory structure.

I'll drop it, thanks.

-- 
Thanks,
Sasha