[PATCH] net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag on Zynq

[Charles Keepax <ckeepax@opensource.cirrus.com>]

A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
macb_set_tx_clk were gated on the presence of this flag.

if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))

However the flag was not added to anything other than the new
sama7g5_gem, turning that function call into a no op for all other
systems. This breaks the networking on Zynq.

This patch adds that flag to Zynq config, it is probably needed on other
systems as well but it is hard to know that without having access to
those systems, so I guess we just have to wait to see who else spots
breakage here.

Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 drivers/net/ethernet/cadence/macb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index d5d910916c2e8..590116b236ef7 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -4536,7 +4536,7 @@ static const struct macb_config zynqmp_config = {
 
 static const struct macb_config zynq_config = {
 	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF |
-		MACB_CAPS_NEEDS_RSTONUBR,
+		MACB_CAPS_NEEDS_RSTONUBR | MACB_CAPS_CLK_HW_CHG,
 	.dma_burst_length = 16,
 	.clk_init = macb_clk_init,
 	.init = macb_init,
-- 
2.11.0