Re: [PATCH v2 RFC net-next 09/18] net: mvpp2: add FCA RXQ non occupied descriptor threshold

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

On Sun, Jan 24, 2021 at 01:43:58PM +0200, stefanc@marvell.com wrote:
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> index 9d69752..0f5069f 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> @@ -1154,6 +1154,9 @@ static void mvpp2_interrupts_mask(void *arg)
>  	mvpp2_thread_write(port->priv,
>  			   mvpp2_cpu_to_thread(port->priv, smp_processor_id()),
>  			   MVPP2_ISR_RX_TX_MASK_REG(port->id), 0);
> +	mvpp2_thread_write(port->priv,
> +			   mvpp2_cpu_to_thread(port->priv, smp_processor_id()),
> +			   MVPP2_ISR_RX_ERR_CAUSE_REG(port->id), 0);

I wonder if this should be refactored:

	u32 thread = mvpp2_cpu_to_thread(port->priv, smp_processor_id());

	mvpp2_thread_write(port->priv, thread,
			   MVPP2_ISR_RX_TX_MASK_REG(port->id), 0);
	mvpp2_thread_write(port->priv, thread,
			   MVPP2_ISR_RX_ERR_CAUSE_REG(port->id), 0);

to avoid having to recompute mvpp2_cpu_to_thread() for each write?

However, looking deeper...

static void mvpp2_interrupts_mask(void *arg)
{
	struct mvpp2_port *port = arg;
	u32 thread;
	int cpu;

	cpu = smp_processor_id();
	if (cpu > port->priv->nthreads)
		return

	thread = mvpp2_cpu_to_thread(port->priv, cpu);
	...

and I wonder about that condition - "cpu > port->priv->nthreads". If
cpu == port->priv->nthreads, then mvpp2_cpu_to_thread() will return
zero, just like the cpu=0 case. This leads me to suspect that this
comparison off by one.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!