Re: [PATCH 15/22] RDMA/irdma: Implement device supported verb APIs

[Leon Romanovsky <leon@kernel.org>]

On Fri, Jan 22, 2021 at 05:48:20PM -0600, Shiraz Saleem wrote:
> From: Mustafa Ismail <mustafa.ismail@intel.com>
>
> Implement device supported verb APIs. The supported APIs
> vary based on the underlying transport the ibdev is
> registered as (i.e. iWARP or RoCEv2).
>
> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
> ---
>  drivers/infiniband/hw/irdma/verbs.c     | 4617 +++++++++++++++++++++++++++++++
>  drivers/infiniband/hw/irdma/verbs.h     |  218 ++
>  include/uapi/rdma/ib_user_ioctl_verbs.h |    1 +
>  3 files changed, 4836 insertions(+)
>  create mode 100644 drivers/infiniband/hw/irdma/verbs.c
>  create mode 100644 drivers/infiniband/hw/irdma/verbs.h

<...>

> +	if (req.userspace_ver > IRDMA_ABI_VER)
> +		goto ver_error;
> +
> +	ucontext->iwdev = iwdev;
> +	ucontext->abi_ver = req.userspace_ver;
> +
> +	uk_attrs = &iwdev->rf->sc_dev.hw_attrs.uk_attrs;
> +	/* GEN_1 legacy support with libi40iw */
> +	if (req.userspace_ver <= 5) {
> +		if (uk_attrs->hw_rev != IRDMA_GEN_1)
> +			goto ver_error;
> +
> +		uresp_gen1.max_qps = iwdev->rf->max_qp;
> +		uresp_gen1.max_pds = iwdev->rf->sc_dev.hw_attrs.max_hw_pds;
> +		uresp_gen1.wq_size = iwdev->rf->sc_dev.hw_attrs.max_qp_wr * 2;
> +		uresp_gen1.kernel_ver = req.userspace_ver;
> +		if (ib_copy_to_udata(udata, &uresp_gen1,
> +				     min(sizeof(uresp_gen1), udata->outlen)))
> +			return -EFAULT;
> +	} else {
> +		u64 bar_off =
> +		    (uintptr_t)iwdev->rf->sc_dev.hw_regs[IRDMA_DB_ADDR_OFFSET];
> +		ucontext->db_mmap_entry =
> +			irdma_user_mmap_entry_insert(ucontext, bar_off,
> +						     IRDMA_MMAP_IO_NC,
> +						     &uresp.db_mmap_key);
> +
> +		if (!ucontext->db_mmap_entry)
> +			return -ENOMEM;
> +
> +		uresp.kernel_ver = IRDMA_ABI_VER;
> +		uresp.feature_flags = uk_attrs->feature_flags;
> +		uresp.max_hw_wq_frags = uk_attrs->max_hw_wq_frags;
> +		uresp.max_hw_read_sges = uk_attrs->max_hw_read_sges;
> +		uresp.max_hw_inline = uk_attrs->max_hw_inline;
> +		uresp.max_hw_rq_quanta = uk_attrs->max_hw_rq_quanta;
> +		uresp.max_hw_wq_quanta = uk_attrs->max_hw_wq_quanta;
> +		uresp.max_hw_sq_chunk = uk_attrs->max_hw_sq_chunk;
> +		uresp.max_hw_cq_size = uk_attrs->max_hw_cq_size;
> +		uresp.min_hw_cq_size = uk_attrs->min_hw_cq_size;
> +		uresp.hw_rev = uk_attrs->hw_rev;
> +		if (ib_copy_to_udata(udata, &uresp,
> +				     min(sizeof(uresp), udata->outlen)))
> +			return -EFAULT;
> +	}

i40iw has different logic here, and in old code, if user supplied "req.userspace_ver < 4",
he will get an error. In new code, it will pass and probably fail later.

Thanks