From: Vladimir Oltean <olteanv@gmail.com>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: netdev <netdev@vger.kernel.org>,
Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vivien Didelot <vivien.didelot@gmail.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>
Subject: [PATCH RESEND v3 net-next 05/12] net: mscc: ocelot: set up the bonding mask in a way that avoids a net_device
Date: Sat, 6 Feb 2021 00:02:14 +0200 [thread overview]
Message-ID: <20210205220221.255646-6-olteanv@gmail.com> (raw)
In-Reply-To: <20210205220221.255646-1-olteanv@gmail.com>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Since this code should be called from pure switchdev as well as from
DSA, we must find a way to determine the bonding mask not by looking
directly at the net_device lowers of the bonding interface, since those
could have different private structures.
We keep a pointer to the bonding upper interface, if present, in struct
ocelot_port. Then the bonding mask becomes the bitwise OR of all ports
that have the same bonding upper interface. This adds a duplication of
functionality with the current "lags" array, but the duplication will be
short-lived, since further patches will remove the latter completely.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
Changes in v3:
None.
Changes in v2:
Adapted to the merged version of the DSA API for LAG offload (i.e.
rejecting a bonding interface due to tx_type now done within the
.port_lag_join callback, caller is supposed to handle -EOPNOTSUPP).
drivers/net/ethernet/mscc/ocelot.c | 29 ++++++++++++++++++++++-------
include/soc/mscc/ocelot.h | 2 ++
2 files changed, 24 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index ef3f10f1e54f..127beedcccde 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -889,6 +889,24 @@ int ocelot_get_ts_info(struct ocelot *ocelot, int port,
}
EXPORT_SYMBOL(ocelot_get_ts_info);
+static u32 ocelot_get_bond_mask(struct ocelot *ocelot, struct net_device *bond)
+{
+ u32 mask = 0;
+ int port;
+
+ for (port = 0; port < ocelot->num_phys_ports; port++) {
+ struct ocelot_port *ocelot_port = ocelot->ports[port];
+
+ if (!ocelot_port)
+ continue;
+
+ if (ocelot_port->bond == bond)
+ mask |= BIT(port);
+ }
+
+ return mask;
+}
+
static u32 ocelot_get_dsa_8021q_cpu_mask(struct ocelot *ocelot)
{
u32 mask = 0;
@@ -1319,20 +1337,15 @@ int ocelot_port_lag_join(struct ocelot *ocelot, int port,
struct net_device *bond,
struct netdev_lag_upper_info *info)
{
- struct net_device *ndev;
u32 bond_mask = 0;
int lag, lp;
if (info->tx_type != NETDEV_LAG_TX_TYPE_HASH)
return -EOPNOTSUPP;
- rcu_read_lock();
- for_each_netdev_in_bond_rcu(bond, ndev) {
- struct ocelot_port_private *priv = netdev_priv(ndev);
+ ocelot->ports[port]->bond = bond;
- bond_mask |= BIT(priv->chip_port);
- }
- rcu_read_unlock();
+ bond_mask = ocelot_get_bond_mask(ocelot, bond);
lp = __ffs(bond_mask);
@@ -1366,6 +1379,8 @@ void ocelot_port_lag_leave(struct ocelot *ocelot, int port,
u32 port_cfg;
int i;
+ ocelot->ports[port]->bond = NULL;
+
/* Remove port from any lag */
for (i = 0; i < ocelot->num_phys_ports; i++)
ocelot->lags[i] &= ~BIT(port);
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 6a61c499a30d..e36a1ed29c01 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -611,6 +611,8 @@ struct ocelot_port {
u8 *xmit_template;
bool is_dsa_8021q_cpu;
+
+ struct net_device *bond;
};
struct ocelot {
--
2.25.1
next prev parent reply other threads:[~2021-02-06 2:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 22:02 [PATCH RESEND v3 net-next 00/12] LAG offload for Ocelot DSA switches Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 01/12] net: mscc: ocelot: rename ocelot_netdevice_port_event to ocelot_netdevice_changeupper Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 02/12] net: mscc: ocelot: use a switch-case statement in ocelot_netdevice_event Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 03/12] net: mscc: ocelot: don't refuse bonding interfaces we can't offload Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 04/12] net: mscc: ocelot: use ipv6 in the aggregation code Vladimir Oltean
2021-02-05 22:02 ` Vladimir Oltean [this message]
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 06/12] net: mscc: ocelot: avoid unneeded "lp" variable in LAG join Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 07/12] net: mscc: ocelot: set up logical port IDs centrally Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 08/12] net: mscc: ocelot: drop the use of the "lags" array Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 09/12] net: mscc: ocelot: rename aggr_count to num_ports_in_lag Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 10/12] net: mscc: ocelot: rebalance LAGs on link up/down events Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 11/12] net: dsa: make assisted_learning_on_cpu_port bypass offloaded LAG interfaces Vladimir Oltean
2021-02-05 22:02 ` [PATCH RESEND v3 net-next 12/12] net: dsa: felix: propagate the LAG offload ops towards the ocelot lib Vladimir Oltean
2021-02-06 23:00 ` [PATCH RESEND v3 net-next 00/12] LAG offload for Ocelot DSA switches patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210205220221.255646-6-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).