netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Walle <michael@walle.cc>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Michael Walle <michael@walle.cc>
Subject: [PATCH net-next 5/9] net: phy: icplus: add IP101A/IP101G model detection
Date: Tue,  9 Feb 2021 17:40:47 +0100	[thread overview]
Message-ID: <20210209164051.18156-6-michael@walle.cc> (raw)
In-Reply-To: <20210209164051.18156-1-michael@walle.cc>

Unfortunately, the IP101A and IP101G share the same PHY identifier.
While most of the functions are somewhat backwards compatible, there is
for example the APS_EN bit on the IP101A but on the IP101G this bit
reserved. Also, the IP101G has many more functionalities.

Deduce the model by accessing the page select register which - according
to the datasheet - is not available on the IP101A. If this register is
writable, assume we have an IP101G.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/net/phy/icplus.c | 43 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 036bac628b11..189a9a34ed5f 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -44,6 +44,8 @@ MODULE_LICENSE("GPL");
 #define IP101A_G_IRQ_DUPLEX_CHANGE	BIT(1)
 #define IP101A_G_IRQ_LINK_CHANGE	BIT(0)
 
+#define IP101G_PAGE_CONTROL				0x14
+#define IP101G_PAGE_CONTROL_MASK			GENMASK(4, 0)
 #define IP101G_DIGITAL_IO_SPEC_CTRL			0x1d
 #define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32		BIT(2)
 
@@ -61,8 +63,14 @@ enum ip101gr_sel_intr32 {
 	IP101GR_SEL_INTR32_RXER,
 };
 
+enum ip101_model {
+	IP101A,
+	IP101G,
+};
+
 struct ip101a_g_phy_priv {
 	enum ip101gr_sel_intr32 sel_intr32;
+	enum ip101_model model;
 };
 
 static int ip175c_config_init(struct phy_device *phydev)
@@ -175,6 +183,39 @@ static int ip175c_config_aneg(struct phy_device *phydev)
 	return 0;
 }
 
+/* The IP101A and the IP101G share the same PHY identifier.The IP101G seems to
+ * be a successor of the IP101A and implements more functions. Amongst other
+ * things a page select register, which is not available on the IP101. Use this
+ * to distinguish these two.
+ */
+static int ip101a_g_detect_model(struct phy_device *phydev)
+{
+	struct ip101a_g_phy_priv *priv = phydev->priv;
+	int oldval, ret;
+
+	oldval = phy_read(phydev, IP101G_PAGE_CONTROL);
+	if (oldval < 0)
+		return oldval;
+
+	ret = phy_write(phydev, IP101G_PAGE_CONTROL, 0xffff);
+	if (ret)
+		return ret;
+
+	ret = phy_read(phydev, IP101G_PAGE_CONTROL);
+	if (ret < 0)
+		return ret;
+
+	if (ret == IP101G_PAGE_CONTROL_MASK)
+		priv->model = IP101G;
+	else
+		priv->model = IP101A;
+
+	phydev_dbg(phydev, "Detected %s\n",
+		   priv->model == IP101G ? "IP101G" : "IP101A");
+
+	return phy_write(phydev, IP101G_PAGE_CONTROL, oldval);
+}
+
 static int ip101a_g_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
@@ -203,7 +244,7 @@ static int ip101a_g_probe(struct phy_device *phydev)
 
 	phydev->priv = priv;
 
-	return 0;
+	return ip101a_g_detect_model(phydev);
 }
 
 static int ip101a_g_config_init(struct phy_device *phydev)
-- 
2.20.1


  parent reply	other threads:[~2021-02-09 16:43 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-09 16:40 [PATCH net-next 0/9] net: phy: icplus: cleanups and new features Michael Walle
2021-02-09 16:40 ` [PATCH net-next 1/9] net: phy: icplus: use PHY_ID_MATCH_MODEL() macro Michael Walle
2021-02-10  1:55   ` Andrew Lunn
2021-02-09 16:40 ` [PATCH net-next 2/9] net: phy: icplus: use PHY_ID_MATCH_EXACT() for IP101A/G Michael Walle
2021-02-10  1:57   ` Andrew Lunn
2021-02-09 16:40 ` [PATCH net-next 3/9] net: phy: icplus: drop address operator for functions Michael Walle
2021-02-10  1:57   ` Andrew Lunn
2021-02-09 16:40 ` [PATCH net-next 4/9] net: phy: icplus: use the .soft_reset() of the phy-core Michael Walle
2021-02-10  2:02   ` Andrew Lunn
2021-02-09 16:40 ` Michael Walle [this message]
2021-02-09 20:03   ` [PATCH net-next 5/9] net: phy: icplus: add IP101A/IP101G model detection Heiner Kallweit
2021-02-09 16:40 ` [PATCH net-next 6/9] net: phy: icplus: don't set APS_EN bit on IP101G Michael Walle
2021-02-10  2:04   ` Andrew Lunn
2021-02-09 16:40 ` [PATCH net-next 7/9] net: phy: icplus: select page before writing control register Michael Walle
2021-02-10  2:07   ` Andrew Lunn
2021-02-10  7:03   ` Heiner Kallweit
2021-02-10  8:25     ` Michael Walle
2021-02-10  9:03       ` Heiner Kallweit
2021-02-10  9:14         ` Michael Walle
2021-02-10 10:30     ` Russell King - ARM Linux admin
2021-02-10 10:38       ` Michael Walle
2021-02-10 10:49         ` Russell King - ARM Linux admin
2021-02-10 11:14           ` Michael Walle
2021-02-10 11:48             ` Russell King - ARM Linux admin
2021-02-10 12:17               ` Michael Walle
2021-02-10 12:26                 ` Heiner Kallweit
2021-02-10 20:27             ` Andrew Lunn
2021-02-09 16:40 ` [PATCH net-next 8/9] net: phy: icplus: add PHY counter for IP101G Michael Walle
2021-02-10  2:10   ` Andrew Lunn
2021-02-09 16:40 ` [PATCH net-next 9/9] net: phy: icplus: add MDI/MDIX support for IP101A/G Michael Walle
2021-02-10  2:12   ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210209164051.18156-6-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).