netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
	kernel@pengutronix.de, "Tong Zhang" <ztong0001@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Marc Kleine-Budde" <mkl@pengutronix.de>
Subject: [net 09/11] can: c_can: move runtime PM enable/disable to c_can_platform
Date: Tue, 16 Mar 2021 09:21:02 +0100	[thread overview]
Message-ID: <20210316082104.4027260-10-mkl@pengutronix.de> (raw)
In-Reply-To: <20210316082104.4027260-1-mkl@pengutronix.de>

From: Tong Zhang <ztong0001@gmail.com>

Currently doing modprobe c_can_pci will make the kernel complain:

    Unbalanced pm_runtime_enable!

this is caused by pm_runtime_enable() called before pm is initialized.

This fix is similar to 227619c3ff7c, move those pm_enable/disable code
to c_can_platform.

Fixes: 4cdd34b26826 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller")
Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c          | 24 +-----------------------
 drivers/net/can/c_can/c_can_platform.c |  6 +++++-
 2 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index ef474bae47a1..6958830cb983 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -212,18 +212,6 @@ static const struct can_bittiming_const c_can_bittiming_const = {
 	.brp_inc = 1,
 };
 
-static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv)
-{
-	if (priv->device)
-		pm_runtime_enable(priv->device);
-}
-
-static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv)
-{
-	if (priv->device)
-		pm_runtime_disable(priv->device);
-}
-
 static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
 {
 	if (priv->device)
@@ -1335,7 +1323,6 @@ static const struct net_device_ops c_can_netdev_ops = {
 
 int register_c_can_dev(struct net_device *dev)
 {
-	struct c_can_priv *priv = netdev_priv(dev);
 	int err;
 
 	/* Deactivate pins to prevent DRA7 DCAN IP from being
@@ -1345,28 +1332,19 @@ int register_c_can_dev(struct net_device *dev)
 	 */
 	pinctrl_pm_select_sleep_state(dev->dev.parent);
 
-	c_can_pm_runtime_enable(priv);
-
 	dev->flags |= IFF_ECHO;	/* we support local echo */
 	dev->netdev_ops = &c_can_netdev_ops;
 
 	err = register_candev(dev);
-	if (err)
-		c_can_pm_runtime_disable(priv);
-	else
+	if (!err)
 		devm_can_led_init(dev);
-
 	return err;
 }
 EXPORT_SYMBOL_GPL(register_c_can_dev);
 
 void unregister_c_can_dev(struct net_device *dev)
 {
-	struct c_can_priv *priv = netdev_priv(dev);
-
 	unregister_candev(dev);
-
-	c_can_pm_runtime_disable(priv);
 }
 EXPORT_SYMBOL_GPL(unregister_c_can_dev);
 
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 05f425ceb53a..47b251b1607c 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -29,6 +29,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -386,6 +387,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
+	pm_runtime_enable(priv->device);
 	ret = register_c_can_dev(dev);
 	if (ret) {
 		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
@@ -398,6 +400,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
 	return 0;
 
 exit_free_device:
+	pm_runtime_disable(priv->device);
 	free_c_can_dev(dev);
 exit:
 	dev_err(&pdev->dev, "probe failed\n");
@@ -408,9 +411,10 @@ static int c_can_plat_probe(struct platform_device *pdev)
 static int c_can_plat_remove(struct platform_device *pdev)
 {
 	struct net_device *dev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(dev);
 
 	unregister_c_can_dev(dev);
-
+	pm_runtime_disable(priv->device);
 	free_c_can_dev(dev);
 
 	return 0;
-- 
2.30.1



  parent reply	other threads:[~2021-03-16  8:22 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-16  8:20 pull-request: can 2021-03-16 Marc Kleine-Budde
2021-03-16  8:20 ` [net 01/11] can: dev: Move device back to init netns on owning netns delete Marc Kleine-Budde
2021-03-16 21:16   ` Jakub Kicinski
2021-03-16  8:20 ` [net 02/11] can: isotp: isotp_setsockopt(): only allow to set low level TX flags for CAN-FD Marc Kleine-Budde
2021-03-16  8:20 ` [net 03/11] can: isotp: TX-path: ensure that CAN frame flags are initialized Marc Kleine-Budde
2021-03-18 10:11   ` Oliver Hartkopp
2021-03-16  8:20 ` [net 04/11] can: peak_usb: add forgotten supported devices Marc Kleine-Budde
2021-03-16  8:20 ` [net 05/11] can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing bitrate Marc Kleine-Budde
2021-03-16  9:02   ` Angelo Dureghello
2021-03-16  9:12     ` Marc Kleine-Budde
2021-03-16  8:20 ` [net 06/11] can: kvaser_pciefd: Always disable bus load reporting Marc Kleine-Budde
2021-03-16  8:21 ` [net 07/11] can: kvaser_usb: Add support for USBcan Pro 4xHS Marc Kleine-Budde
2021-03-16  8:21 ` [net 08/11] can: c_can_pci: c_can_pci_remove(): fix use-after-free Marc Kleine-Budde
2021-03-16  8:21 ` Marc Kleine-Budde [this message]
2021-03-16  8:21 ` [net 10/11] can: m_can: m_can_do_rx_poll(): fix extraneous msg loss warning Marc Kleine-Budde
2021-03-16  8:21 ` [net 11/11] can: m_can: m_can_rx_peripheral(): fix RX being blocked by errors Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210316082104.4027260-10-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=ztong0001@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).