[PATCH v2 net-next 2/2] net: dsa: b53: support legacy tags

["Álvaro Fernández Rojas" <noltari@gmail.com>]

These tags are used on BCM5325, BCM5365 and BCM63xx switches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 v2: remove unneeded comment and remove NET_DSA_TAG_BRCM_LEGACY from
  b53_can_enable_brcm_tags() as Florian reported that legacy tag can be
  stacked.

 drivers/net/dsa/b53/Kconfig      |  1 +
 drivers/net/dsa/b53/b53_common.c | 12 +++++++-----
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig
index f9891a81c808..90b525160b71 100644
--- a/drivers/net/dsa/b53/Kconfig
+++ b/drivers/net/dsa/b53/Kconfig
@@ -3,6 +3,7 @@ menuconfig B53
 	tristate "Broadcom BCM53xx managed switch support"
 	depends on NET_DSA
 	select NET_DSA_TAG_BRCM
+	select NET_DSA_TAG_BRCM_LEGACY
 	select NET_DSA_TAG_BRCM_PREPEND
 	help
 	  This driver adds support for Broadcom managed switch chips. It supports
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index a162499bcafc..d3e5baa1ed5f 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2052,15 +2052,17 @@ enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
 {
 	struct b53_device *dev = ds->priv;
 
-	/* Older models (5325, 5365) support a different tag format that we do
-	 * not support in net/dsa/tag_brcm.c yet.
-	 */
-	if (is5325(dev) || is5365(dev) ||
-	    !b53_can_enable_brcm_tags(ds, port, mprot)) {
+	if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
 		dev->tag_protocol = DSA_TAG_PROTO_NONE;
 		goto out;
 	}
 
+	/* Older models require a different 6 byte tag */
+	if (is5325(dev) || is5365(dev) || is63xx(dev)) {
+		dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
+		goto out;
+	}
+
 	/* Broadcom BCM58xx chips have a flow accelerator on Port 8
 	 * which requires us to use the prepended Broadcom tag type
 	 */
-- 
2.20.1