[PATCH v2] can: isotp: tx-path: zero initialize outgoing CAN frames

[Oliver Hartkopp <socketcan@hartkopp.net>]

Commit d4eb538e1f48 ("can: isotp: TX-path: ensure that CAN frame flags are
initialized") ensured the TX flags to be properly set for outgoing CAN
frames.

In fact the root cause of the issue results from a missing initialization
of outgoing CAN frames created by isotp. This is no problem on the CAN bus
as the CAN driver only picks the correctly defined content from the struct
can(fd)_frame. But when the outgoing frames are monitored (e.g. with
candump) we potentially leak some bytes in the unused content of
struct can(fd)_frame.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
 net/can/isotp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/can/isotp.c b/net/can/isotp.c
index 430976485d95..15ea1234d457 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -194,11 +194,11 @@ static int isotp_send_fc(struct sock *sk, int ae, u8 flowstatus)
 	can_skb_prv(nskb)->skbcnt = 0;
 
 	nskb->dev = dev;
 	can_skb_set_owner(nskb, sk);
 	ncf = (struct canfd_frame *)nskb->data;
-	skb_put(nskb, so->ll.mtu);
+	skb_put_zero(nskb, so->ll.mtu);
 
 	/* create & send flow control reply */
 	ncf->can_id = so->txid;
 
 	if (so->opt.flags & CAN_ISOTP_TX_PADDING) {
@@ -777,11 +777,11 @@ static enum hrtimer_restart isotp_tx_timer_handler(struct hrtimer *hrtimer)
 		can_skb_reserve(skb);
 		can_skb_prv(skb)->ifindex = dev->ifindex;
 		can_skb_prv(skb)->skbcnt = 0;
 
 		cf = (struct canfd_frame *)skb->data;
-		skb_put(skb, so->ll.mtu);
+		skb_put_zero(skb, so->ll.mtu);
 
 		/* create consecutive frame */
 		isotp_fill_dataframe(cf, so, ae, 0);
 
 		/* place consecutive frame N_PCI in appropriate index */
@@ -893,11 +893,11 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 	so->tx.state = ISOTP_SENDING;
 	so->tx.len = size;
 	so->tx.idx = 0;
 
 	cf = (struct canfd_frame *)skb->data;
-	skb_put(skb, so->ll.mtu);
+	skb_put_zero(skb, so->ll.mtu);
 
 	/* check for single frame transmission depending on TX_DL */
 	if (size <= so->tx.ll_dl - SF_PCI_SZ4 - ae - off) {
 		/* The message size generally fits into a SingleFrame - good.
 		 *
-- 
2.30.1