From: "Marek Behún" <kabel@kernel.org>
To: netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <rmk+kernel@armlinux.org.uk>,
kuba@kernel.org
Cc: "Marek Behún" <kabel@kernel.org>
Subject: [PATCH net-next v2 01/12] net: phy: marvell10g: rename register
Date: Thu, 25 Mar 2021 14:12:39 +0100 [thread overview]
Message-ID: <20210325131250.15901-2-kabel@kernel.org> (raw)
In-Reply-To: <20210325131250.15901-1-kabel@kernel.org>
The MV_V2_PORT_MAC_TYPE_* is part of the CTRL register. Rename to
MV_V2_PORT_CTRL_MACTYPE_*.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
drivers/net/phy/marvell10g.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 74b64e52ffa2..9b514124af0d 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -80,8 +80,8 @@ enum {
MV_V2_PORT_CTRL = 0xf001,
MV_V2_PORT_CTRL_SWRST = BIT(15),
MV_V2_PORT_CTRL_PWRDOWN = BIT(11),
- MV_V2_PORT_MAC_TYPE_MASK = 0x7,
- MV_V2_PORT_MAC_TYPE_RATE_MATCH = 0x6,
+ MV_V2_PORT_CTRL_MACTYPE_MASK = 0x7,
+ MV_V2_PORT_CTRL_MACTYPE_RATE_MATCH = 0x6,
/* Temperature control/read registers (88X3310 only) */
MV_V2_TEMP_CTRL = 0xf08a,
MV_V2_TEMP_CTRL_MASK = 0xc000,
@@ -477,8 +477,8 @@ static int mv3310_config_init(struct phy_device *phydev)
val = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL);
if (val < 0)
return val;
- priv->rate_match = ((val & MV_V2_PORT_MAC_TYPE_MASK) ==
- MV_V2_PORT_MAC_TYPE_RATE_MATCH);
+ priv->rate_match = ((val & MV_V2_PORT_CTRL_MACTYPE_MASK) ==
+ MV_V2_PORT_CTRL_MACTYPE_RATE_MATCH);
/* Enable EDPD mode - saving 600mW */
return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
--
2.26.2
next prev parent reply other threads:[~2021-03-25 13:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-25 13:12 [PATCH net-next v2 00/12] net: phy: marvell10g updates Marek Behún
2021-03-25 13:12 ` Marek Behún [this message]
2021-03-25 13:12 ` [PATCH net-next v2 02/12] net: phy: marvell10g: fix typo Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 03/12] net: phy: marvell10g: allow 5gbase-r and usxgmii Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 04/12] net: phy: marvell10g: indicate 88X33X0 only port control registers Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 05/12] net: phy: marvell10g: add MACTYPE definitions for 88X33X0/88X33X0P Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 06/12] net: phy: marvell10g: add MACTYPE definitions for 88E21XX Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 07/12] net: phy: marvell10g: add code to determine number of ports Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 08/12] net: phy: marvell10g: support all rate matching modes Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 09/12] net: phy: marvell10g: support other MACTYPEs Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 10/12] net: phy: add constants for 2.5G and 5G speed in PCS speed register Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 11/12] net: phy: marvell10g: print exact model Marek Behún
2021-03-25 15:36 ` Marek Behún
2021-03-25 15:54 ` Russell King - ARM Linux admin
2021-03-25 16:56 ` Marek Behún
2021-03-25 20:29 ` Marek Behún
2021-03-25 20:44 ` Heiner Kallweit
2021-03-25 20:54 ` Marek Behún
2021-03-26 9:07 ` Russell King - ARM Linux admin
2021-03-26 11:11 ` Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 12/12] net: phy: marvell10g: better check for compatible interface Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210325131250.15901-2-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).