From: "Marek Behún" <kabel@kernel.org>
To: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
kuba@kernel.org
Subject: Re: [PATCH net-next v2 11/12] net: phy: marvell10g: print exact model
Date: Thu, 25 Mar 2021 17:56:29 +0100 [thread overview]
Message-ID: <20210325175629.7e670f34@thinkpad> (raw)
In-Reply-To: <20210325155452.GO1463@shell.armlinux.org.uk>
On Thu, 25 Mar 2021 15:54:52 +0000
Russell King - ARM Linux admin <linux@armlinux.org.uk> wrote:
> On Thu, Mar 25, 2021 at 02:12:49PM +0100, Marek Behún wrote:
> > @@ -443,12 +446,24 @@ static int mv3310_probe(struct phy_device *phydev)
> >
> > switch (phydev->drv->phy_id) {
> > case MARVELL_PHY_ID_88X3310:
> > + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_XGSTAT);
> > + if (ret < 0)
> > + return ret;
> > +
> > + has_macsec = !(ret & MV_PMA_XGSTAT_NO_MACSEC);
> > +
> > if (nports == 4)
> > priv->model = MV_MODEL_88X3340;
> > else if (nports == 1)
> > priv->model = MV_MODEL_88X3310;
> > break;
>
> The 88X3310 and 88X3340 can be differentiated by bit 3 in the revision.
> In other words, 88X3310 is 0x09a0..0x09a7, and 88X3340 is
> 0x09a8..0x09af. We could add a separate driver structure, which would
> then allow the kernel to print a more specific string via standard
> methods, like we do for other PHYs. Not sure whether that would work
> for the 88X21x0 family though.
OK I will look into this. What are your thoughts on the other patches?
Marek
next prev parent reply other threads:[~2021-03-25 16:57 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-25 13:12 [PATCH net-next v2 00/12] net: phy: marvell10g updates Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 01/12] net: phy: marvell10g: rename register Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 02/12] net: phy: marvell10g: fix typo Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 03/12] net: phy: marvell10g: allow 5gbase-r and usxgmii Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 04/12] net: phy: marvell10g: indicate 88X33X0 only port control registers Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 05/12] net: phy: marvell10g: add MACTYPE definitions for 88X33X0/88X33X0P Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 06/12] net: phy: marvell10g: add MACTYPE definitions for 88E21XX Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 07/12] net: phy: marvell10g: add code to determine number of ports Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 08/12] net: phy: marvell10g: support all rate matching modes Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 09/12] net: phy: marvell10g: support other MACTYPEs Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 10/12] net: phy: add constants for 2.5G and 5G speed in PCS speed register Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 11/12] net: phy: marvell10g: print exact model Marek Behún
2021-03-25 15:36 ` Marek Behún
2021-03-25 15:54 ` Russell King - ARM Linux admin
2021-03-25 16:56 ` Marek Behún [this message]
2021-03-25 20:29 ` Marek Behún
2021-03-25 20:44 ` Heiner Kallweit
2021-03-25 20:54 ` Marek Behún
2021-03-26 9:07 ` Russell King - ARM Linux admin
2021-03-26 11:11 ` Marek Behún
2021-03-25 13:12 ` [PATCH net-next v2 12/12] net: phy: marvell10g: better check for compatible interface Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210325175629.7e670f34@thinkpad \
--to=kabel@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).