netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: netdev@vger.kernel.org, Russell King <rmk+kernel@armlinux.org.uk>
Cc: "David S . Miller" <davem@davemloft.net>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	kuba@kernel.org, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH net-next v3 11/18] net: phy: marvell10g: store temperature read method in chip strucutre
Date: Wed,  7 Apr 2021 00:11:00 +0200	[thread overview]
Message-ID: <20210406221107.1004-12-kabel@kernel.org> (raw)
In-Reply-To: <20210406221107.1004-1-kabel@kernel.org>

Now that we have a chip structure, we can store the temperature reading
method in this structure (OOP style).

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/net/phy/marvell10g.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index e3ced38f40c9..a7c7c87201fa 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -112,6 +112,10 @@ struct mv3310_chip {
 	DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX);
 	int (*get_mactype)(struct phy_device *phydev);
 	int (*init_interface)(struct phy_device *phydev, int mactype);
+
+#ifdef CONFIG_HWMON
+	int (*hwmon_read_temp_reg)(struct phy_device *phydev);
+#endif
 };
 
 struct mv3310_priv {
@@ -151,18 +155,11 @@ static int mv2110_hwmon_read_temp_reg(struct phy_device *phydev)
 	return phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_TEMP);
 }
 
-static int mv10g_hwmon_read_temp_reg(struct phy_device *phydev)
-{
-	if (phydev->drv->phy_id == MARVELL_PHY_ID_88X3310)
-		return mv3310_hwmon_read_temp_reg(phydev);
-	else /* MARVELL_PHY_ID_88E2110 */
-		return mv2110_hwmon_read_temp_reg(phydev);
-}
-
 static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 			     u32 attr, int channel, long *value)
 {
 	struct phy_device *phydev = dev_get_drvdata(dev);
+	const struct mv3310_chip *chip = to_mv3310_chip(phydev);
 	int temp;
 
 	if (type == hwmon_chip && attr == hwmon_chip_update_interval) {
@@ -171,7 +168,7 @@ static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 	}
 
 	if (type == hwmon_temp && attr == hwmon_temp_input) {
-		temp = mv10g_hwmon_read_temp_reg(phydev);
+		temp = chip->hwmon_read_temp_reg(phydev);
 		if (temp < 0)
 			return temp;
 
@@ -865,6 +862,10 @@ static const struct mv3310_chip mv3310_type = {
 				  PHY_INTERFACE_MODE_USXGMII),
 	.get_mactype = mv3310_get_mactype,
 	.init_interface = mv3310_init_interface,
+
+#ifdef CONFIG_HWMON
+	.hwmon_read_temp_reg = mv3310_hwmon_read_temp_reg,
+#endif
 };
 
 static const struct mv3310_chip mv2110_type = {
@@ -877,6 +878,10 @@ static const struct mv3310_chip mv2110_type = {
 				  PHY_INTERFACE_MODE_USXGMII),
 	.get_mactype = mv2110_get_mactype,
 	.init_interface = mv2110_init_interface,
+
+#ifdef CONFIG_HWMON
+	.hwmon_read_temp_reg = mv2110_hwmon_read_temp_reg,
+#endif
 };
 
 static struct phy_driver mv3310_drivers[] = {
-- 
2.26.2


  parent reply	other threads:[~2021-04-06 22:12 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-06 22:10 [PATCH net-next v3 00/18] net: phy: marvell10g updates Marek Behún
2021-04-06 22:10 ` [PATCH net-next v3 01/18] net: phy: marvell10g: rename register Marek Behún
2021-04-06 22:37   ` Andrew Lunn
2021-04-06 22:10 ` [PATCH net-next v3 02/18] net: phy: marvell10g: fix typo Marek Behún
2021-04-06 22:38   ` Andrew Lunn
2021-04-06 22:10 ` [PATCH net-next v3 03/18] net: phy: marvell10g: allow 5gbase-r and usxgmii Marek Behún
2021-04-06 22:39   ` Andrew Lunn
2021-04-06 22:10 ` [PATCH net-next v3 04/18] net: phy: marvell10g: indicate 88X33x0 only port control registers Marek Behún
2021-04-07  0:10   ` Andrew Lunn
2021-04-07  0:22     ` Marek Behún
2021-04-06 22:10 ` [PATCH net-next v3 05/18] net: phy: marvell10g: add all MACTYPE definitions for 88X33x0 Marek Behún
2021-04-06 23:22   ` Andrew Lunn
2021-04-06 22:10 ` [PATCH net-next v3 06/18] net: phy: marvell10g: add MACTYPE definitions for 88E21xx Marek Behún
2021-04-06 23:22   ` Andrew Lunn
2021-04-06 22:10 ` [PATCH net-next v3 07/18] net: phy: marvell10g: support all rate matching modes Marek Behún
2021-04-06 23:30   ` Andrew Lunn
2021-04-06 23:36     ` Marek Behún
2021-04-06 23:33   ` Andrew Lunn
2021-04-06 23:53     ` Marek Behún
2021-04-06 22:10 ` [PATCH net-next v3 08/18] include: add library helpers for variadic macro expansion Marek Behún
2021-04-06 22:10 ` [PATCH net-next v3 09/18] include: bitmap: add macro for bitmap initialization Marek Behún
2021-04-06 23:38   ` Andrew Lunn
2021-04-06 23:50     ` Marek Behún
2021-04-06 22:10 ` [PATCH net-next v3 10/18] net: phy: marvell10g: check for correct supported interface mode Marek Behún
2021-04-06 23:40   ` Andrew Lunn
2021-04-06 22:11 ` Marek Behún [this message]
2021-04-06 23:42   ` [PATCH net-next v3 11/18] net: phy: marvell10g: store temperature read method in chip strucutre Andrew Lunn
2021-04-06 22:11 ` [PATCH net-next v3 12/18] net: phy: marvell10g: support other MACTYPEs Marek Behún
2021-04-06 22:11 ` [PATCH net-next v3 13/18] net: phy: marvell10g: add separate structure for 88X3340 Marek Behún
2021-04-06 23:47   ` Andrew Lunn
2021-04-06 22:11 ` [PATCH net-next v3 14/18] net: phy: marvell10g: fix driver name for mv88e2110 Marek Behún
2021-04-06 23:49   ` Andrew Lunn
2021-04-06 22:11 ` [PATCH net-next v3 15/18] net: phy: add constants for 2.5G and 5G speed in PCS speed register Marek Behún
2021-04-06 23:59   ` Andrew Lunn
2021-04-06 22:11 ` [PATCH net-next v3 16/18] net: phy: marvell10g: differentiate 88E2110 vs 88E2111 Marek Behún
2021-04-07  0:01   ` Andrew Lunn
2021-04-06 22:11 ` [PATCH net-next v3 17/18] net: phy: marvell10g: change module description Marek Behún
2021-04-07  0:01   ` Andrew Lunn
2021-04-06 22:11 ` [PATCH net-next v3 18/18] MAINTAINERS: add myself as maintainer of marvell10g driver Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210406221107.1004-12-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).