From: "Marek Behún" <kabel@kernel.org>
To: netdev@vger.kernel.org, Russell King <rmk+kernel@armlinux.org.uk>,
Andrew Lunn <andrew@lunn.ch>
Cc: "David S . Miller" <davem@davemloft.net>,
kuba@kernel.org, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH net-next v4 03/16] net: phy: marvell10g: allow 5gbase-r and usxgmii
Date: Wed, 7 Apr 2021 22:22:41 +0200 [thread overview]
Message-ID: <20210407202254.29417-4-kabel@kernel.org> (raw)
In-Reply-To: <20210407202254.29417-1-kabel@kernel.org>
These modes are also supported by these PHYs.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/phy/marvell10g.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index f2f0da9717be..881a0717846e 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -462,9 +462,11 @@ static int mv3310_config_init(struct phy_device *phydev)
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
+ phydev->interface != PHY_INTERFACE_MODE_5GBASER &&
phydev->interface != PHY_INTERFACE_MODE_XAUI &&
phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
- phydev->interface != PHY_INTERFACE_MODE_10GBASER)
+ phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
+ phydev->interface != PHY_INTERFACE_MODE_USXGMII)
return -ENODEV;
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
@@ -599,6 +601,7 @@ static void mv3310_update_interface(struct phy_device *phydev)
if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||
+ phydev->interface == PHY_INTERFACE_MODE_5GBASER ||
phydev->interface == PHY_INTERFACE_MODE_10GBASER) &&
phydev->link) {
/* The PHY automatically switches its serdes interface (and
@@ -611,6 +614,9 @@ static void mv3310_update_interface(struct phy_device *phydev)
case SPEED_10000:
phydev->interface = PHY_INTERFACE_MODE_10GBASER;
break;
+ case SPEED_5000:
+ phydev->interface = PHY_INTERFACE_MODE_5GBASER;
+ break;
case SPEED_2500:
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
break;
--
2.26.2
next prev parent reply other threads:[~2021-04-07 20:24 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-07 20:22 [PATCH net-next v4 00/16] net: phy: marvell10g updates Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 01/16] net: phy: marvell10g: rename register Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 02/16] net: phy: marvell10g: fix typo Marek Behún
2021-04-07 20:22 ` Marek Behún [this message]
2021-04-07 20:22 ` [PATCH net-next v4 04/16] net: phy: marvell10g: indicate 88X33x0 only port control registers Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 05/16] net: phy: marvell10g: add all MACTYPE definitions for 88X33x0 Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 06/16] net: phy: marvell10g: add MACTYPE definitions for 88E21xx Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 07/16] net: phy: marvell10g: support all rate matching modes Marek Behún
2021-04-07 23:03 ` Andrew Lunn
2021-04-07 20:22 ` [PATCH net-next v4 08/16] net: phy: marvell10g: check for correct supported interface mode Marek Behún
2021-04-07 23:05 ` Andrew Lunn
2021-04-07 20:22 ` [PATCH net-next v4 09/16] net: phy: marvell10g: store temperature read method in chip strucutre Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 10/16] net: phy: marvell10g: support other MACTYPEs Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 11/16] net: phy: marvell10g: add separate structure for 88X3340 Marek Behún
2021-04-07 23:09 ` Andrew Lunn
2021-07-10 16:12 ` Matteo Croce
2021-07-11 13:09 ` Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 12/16] net: phy: marvell10g: fix driver name for mv88e2110 Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 13/16] net: phy: add constants for 2.5G and 5G speed in PCS speed register Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 14/16] net: phy: marvell10g: differentiate 88E2110 vs 88E2111 Marek Behún
2021-04-07 23:10 ` Andrew Lunn
2021-04-07 20:22 ` [PATCH net-next v4 15/16] net: phy: marvell10g: change module description Marek Behún
2021-04-07 20:22 ` [PATCH net-next v4 16/16] MAINTAINERS: add myself as maintainer of marvell10g driver Marek Behún
2021-04-08 20:20 ` [PATCH net-next v4 00/16] net: phy: marvell10g updates patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210407202254.29417-4-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).