netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>
Cc: "David S . Miller" <davem@davemloft.net>,
	"Russell King" <rmk+kernel@armlinux.org.uk>,
	kuba@kernel.org, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH net-next v2 2/5] net: phy: marvell: fix HWMON enable register for 6390
Date: Tue, 20 Apr 2021 09:54:00 +0200	[thread overview]
Message-ID: <20210420075403.5845-3-kabel@kernel.org> (raw)
In-Reply-To: <20210420075403.5845-1-kabel@kernel.org>

Register 27_6.15:14 has the following description in 88E6393X
documentation:
  Temperature Sensor Enable
    0x0 - Sample every 1s
    0x1 - Sense rate decided by bits 10:8 of this register
    0x2 - Use 26_6.5 (One shot Temperature Sample) to enable
    0x3 - Disable

This is compatible with how the 6390 code uses this register currently,
but the 6390 code handles it as two 1-bit registers (somewhat), instead
of one register with 4 possible values.

(A newer version of the 6390 documentation removed temperature sensor
 section completely. In an older version, the above mentioned register
 is reserved, although it is R/W. Since the code works, I think we can
 assume that it is correct.)

Rename this register and define all 4 values according to 6393X
documentation.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/net/phy/marvell.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 70cfcfcdd8f2..9529aaa3bed3 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -113,11 +113,11 @@
 #define MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN		BIT(9)
 
 #define MII_88E6390_MISC_TEST		0x1b
-#define MII_88E6390_MISC_TEST_SAMPLE_1S		0
-#define MII_88E6390_MISC_TEST_SAMPLE_10MS	BIT(14)
-#define MII_88E6390_MISC_TEST_SAMPLE_DISABLE	BIT(15)
-#define MII_88E6390_MISC_TEST_SAMPLE_ENABLE	0
-#define MII_88E6390_MISC_TEST_SAMPLE_MASK	(0x3 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_SAMPLE_1S	(0x0 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE		(0x1 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_ONESHOT	(0x2 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_DISABLE		(0x3 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK			(0x3 << 14)
 
 #define MII_88E6390_TEMP_SENSOR		0x1c
 #define MII_88E6390_TEMP_SENSOR_MASK	0xff
@@ -2352,9 +2352,8 @@ static int m88e6390_get_temp(struct phy_device *phydev, long *temp)
 	if (ret < 0)
 		goto error;
 
-	ret = ret & ~MII_88E6390_MISC_TEST_SAMPLE_MASK;
-	ret |= MII_88E6390_MISC_TEST_SAMPLE_ENABLE |
-		MII_88E6390_MISC_TEST_SAMPLE_1S;
+	ret = ret & ~MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK;
+	ret |= MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_SAMPLE_1S;
 
 	ret = __phy_write(phydev, MII_88E6390_MISC_TEST, ret);
 	if (ret < 0)
@@ -2381,8 +2380,8 @@ static int m88e6390_get_temp(struct phy_device *phydev, long *temp)
 	if (ret < 0)
 		goto error;
 
-	ret = ret & ~MII_88E6390_MISC_TEST_SAMPLE_MASK;
-	ret |= MII_88E6390_MISC_TEST_SAMPLE_DISABLE;
+	ret = ret & ~MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK;
+	ret |= MII_88E6390_MISC_TEST_TEMP_SENSOR_DISABLE;
 
 	ret = __phy_write(phydev, MII_88E6390_MISC_TEST, ret);
 
-- 
2.26.3


  parent reply	other threads:[~2021-04-20  7:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-20  7:53 [PATCH net-next v2 0/5] net: phy: marvell: some HWMON updates Marek Behún
2021-04-20  7:53 ` [PATCH net-next v2 1/5] net: phy: marvell: refactor HWMON OOP style Marek Behún
2021-04-20  7:54 ` Marek Behún [this message]
2021-04-20  7:54 ` [PATCH net-next v2 3/5] net: phy: marvell: use assignment by bitwise AND operator Marek Behún
2021-04-20  7:54 ` [PATCH net-next v2 4/5] net: dsa: mv88e6xxx: simulate Amethyst PHY model number Marek Behún
2021-04-20  7:54 ` [PATCH net-next v2 5/5] net: phy: marvell: add support for Amethyst internal PHY Marek Behún
2021-04-20 23:50 ` [PATCH net-next v2 0/5] net: phy: marvell: some HWMON updates patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210420075403.5845-3-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).