[PATCH AUTOSEL 5.12 13/37] svcrdma: Don't leak send_ctxt on Send errors

[PATCH AUTOSEL 5.12 13/37] svcrdma: Don't leak send_ctxt on Send errors

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 351461f332db5670056a9c6bce6916027f91072f ]

Address a rare send_ctxt leak in the svc_rdma_sendto() error paths.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/svc_rdma_sendto.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 52c759a8543e..3669661457c1 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -958,7 +958,7 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
 	p = xdr_reserve_space(&sctxt->sc_stream,
 			      rpcrdma_fixed_maxsz * sizeof(*p));
 	if (!p)
-		goto err0;
+		goto err1;
 
 	ret = svc_rdma_send_reply_chunk(rdma, rctxt, &rqstp->rq_res);
 	if (ret < 0)
@@ -970,11 +970,11 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
 	*p = pcl_is_empty(&rctxt->rc_reply_pcl) ? rdma_msg : rdma_nomsg;
 
 	if (svc_rdma_encode_read_list(sctxt) < 0)
-		goto err0;
+		goto err1;
 	if (svc_rdma_encode_write_list(rctxt, sctxt) < 0)
-		goto err0;
+		goto err1;
 	if (svc_rdma_encode_reply_chunk(rctxt, sctxt, ret) < 0)
-		goto err0;
+		goto err1;
 
 	ret = svc_rdma_send_reply_msg(rdma, sctxt, rctxt, rqstp);
 	if (ret < 0)
-- 
2.30.2

[PATCH AUTOSEL 5.12 28/37] bridge: Fix possible races between assigning rx_handler_data and setting IFF_BRIDGE_PORT bit

[Sasha Levin]

From: Zhang Zhengming <zhangzhengming@huawei.com>

[ Upstream commit 59259ff7a81b9eb6213891c6451221e567f8f22f ]

There is a crash in the function br_get_link_af_size_filtered,
as the port_exists(dev) is true and the rx_handler_data of dev is NULL.
But the rx_handler_data of dev is correct saved in vmcore.

The oops looks something like:
 ...
 pc : br_get_link_af_size_filtered+0x28/0x1c8 [bridge]
 ...
 Call trace:
  br_get_link_af_size_filtered+0x28/0x1c8 [bridge]
  if_nlmsg_size+0x180/0x1b0
  rtnl_calcit.isra.12+0xf8/0x148
  rtnetlink_rcv_msg+0x334/0x370
  netlink_rcv_skb+0x64/0x130
  rtnetlink_rcv+0x28/0x38
  netlink_unicast+0x1f0/0x250
  netlink_sendmsg+0x310/0x378
  sock_sendmsg+0x4c/0x70
  __sys_sendto+0x120/0x150
  __arm64_sys_sendto+0x30/0x40
  el0_svc_common+0x78/0x130
  el0_svc_handler+0x38/0x78
  el0_svc+0x8/0xc

In br_add_if(), we found there is no guarantee that
assigning rx_handler_data to dev->rx_handler_data
will before setting the IFF_BRIDGE_PORT bit of priv_flags.
So there is a possible data competition:

CPU 0:                                                        CPU 1:
(RCU read lock)                                               (RTNL lock)
rtnl_calcit()                                                 br_add_slave()
  if_nlmsg_size()                                               br_add_if()
    br_get_link_af_size_filtered()                              -> netdev_rx_handler_register
                                                                    ...
                                                                    // The order is not guaranteed
      ...                                                           -> dev->priv_flags |= IFF_BRIDGE_PORT;
      // The IFF_BRIDGE_PORT bit of priv_flags has been set
      -> if (br_port_exists(dev)) {
        // The dev->rx_handler_data has NOT been assigned
        -> p = br_port_get_rcu(dev);
        ....
                                                                    -> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
                                                                     ...

Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value.

Signed-off-by: Zhang Zhengming <zhangzhengming@huawei.com>
Reviewed-by: Zhao Lei <zhaolei69@huawei.com>
Reviewed-by: Wang Xiaogang <wangxiaogang3@huawei.com>
Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_netlink.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index f2b1343f8332..ed5aba21d3d5 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -103,8 +103,9 @@ static size_t br_get_link_af_size_filtered(const struct net_device *dev,
 
 	rcu_read_lock();
 	if (netif_is_bridge_port(dev)) {
-		p = br_port_get_rcu(dev);
-		vg = nbp_vlan_group_rcu(p);
+		p = br_port_get_check_rcu(dev);
+		if (p)
+			vg = nbp_vlan_group_rcu(p);
 	} else if (dev->priv_flags & IFF_EBRIDGE) {
 		br = netdev_priv(dev);
 		vg = br_vlan_group_rcu(br);
-- 
2.30.2

[PATCH AUTOSEL 5.12 29/37] net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info

[Sasha Levin]

From: Phillip Potter <phil@philpotter.co.uk>

[ Upstream commit 2e9f60932a2c19e8a11b4a69d419f107024b05a0 ]

Check at start of fill_frame_info that the MAC header in the supplied
skb is large enough to fit a struct hsr_ethhdr, as otherwise this is
not a valid HSR frame. If it is too small, return an error which will
then cause the callers to clean up the skb. Fixes a KMSAN-found
uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=f7e9b601f1414f814f7602a82b6619a8d80bce3f

Reported-by: syzbot+e267bed19bfc5478fb33@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_forward.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c
index b218e4594009..6852e9bccf5b 100644
--- a/net/hsr/hsr_forward.c
+++ b/net/hsr/hsr_forward.c
@@ -520,6 +520,10 @@ static int fill_frame_info(struct hsr_frame_info *frame,
 	struct ethhdr *ethhdr;
 	__be16 proto;
 
+	/* Check if skb contains hsr_ethhdr */
+	if (skb->mac_len < sizeof(struct hsr_ethhdr))
+		return -EINVAL;
+
 	memset(frame, 0, sizeof(*frame));
 	frame->is_supervision = is_supervision_frame(port->hsr, skb);
 	frame->node_src = hsr_get_node(port, &hsr->node_db, skb,
-- 
2.30.2

[PATCH AUTOSEL 5.12 33/37] net:CXGB4: fix leak if sk_buff is not used

[Sasha Levin]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit 52bfcdd87e83d9e69d22da5f26b1512ffc81deed ]

An sk_buff is allocated to send a flow control message, but it's not
sent in all cases: in case the state is not appropiate to send it or if
it can't be enqueued.

In the first of these 2 cases, the sk_buff was discarded but not freed,
producing a memory leak.

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 256fae15e032..1e5f2edb70cf 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2563,12 +2563,12 @@ int cxgb4_ethofld_send_flowc(struct net_device *dev, u32 eotid, u32 tc)
 	spin_lock_bh(&eosw_txq->lock);
 	if (tc != FW_SCHED_CLS_NONE) {
 		if (eosw_txq->state != CXGB4_EO_STATE_CLOSED)
-			goto out_unlock;
+			goto out_free_skb;
 
 		next_state = CXGB4_EO_STATE_FLOWC_OPEN_SEND;
 	} else {
 		if (eosw_txq->state != CXGB4_EO_STATE_ACTIVE)
-			goto out_unlock;
+			goto out_free_skb;
 
 		next_state = CXGB4_EO_STATE_FLOWC_CLOSE_SEND;
 	}
@@ -2604,17 +2604,19 @@ int cxgb4_ethofld_send_flowc(struct net_device *dev, u32 eotid, u32 tc)
 		eosw_txq_flush_pending_skbs(eosw_txq);
 
 	ret = eosw_txq_enqueue(eosw_txq, skb);
-	if (ret) {
-		dev_consume_skb_any(skb);
-		goto out_unlock;
-	}
+	if (ret)
+		goto out_free_skb;
 
 	eosw_txq->state = next_state;
 	eosw_txq->flowc_idx = eosw_txq->pidx;
 	eosw_txq_advance(eosw_txq, 1);
 	ethofld_xmit(dev, eosw_txq);
 
-out_unlock:
+	spin_unlock_bh(&eosw_txq->lock);
+	return 0;
+
+out_free_skb:
+	dev_consume_skb_any(skb);
 	spin_unlock_bh(&eosw_txq->lock);
 	return ret;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.12 37/37] net: stmmac: Do not enable RX FIFO overflow interrupts

[Sasha Levin]

From: Yannick Vignon <yannick.vignon@nxp.com>

[ Upstream commit 8a7cb245cf28cb3e541e0d6c8624b95d079e155b ]

The RX FIFO overflows when the system is not able to process all received
packets and they start accumulating (first in the DMA queue in memory,
then in the FIFO). An interrupt is then raised for each overflowing packet
and handled in stmmac_interrupt(). This is counter-productive, since it
brings the system (or more likely, one CPU core) to its knees to process
the FIFO overflow interrupts.

stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr
into the corresponding hardware register (according to the MAC spec, this
has the effect of restarting the MAC DMA). However, without freeing any rx
descriptors, the DMA stops right away, and another overflow interrupt is
raised as the FIFO overflows again. Since the DMA is already restarted at
the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO
overflow interrupts and the corresponding handling code has no side effect,
and eliminates the interrupt storm when the RX FIFO overflows.

Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c  |  7 +------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++------------
 2 files changed, 3 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 62aa0e95beb7..a7249e4071f1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -222,7 +222,7 @@ static void dwmac4_dma_rx_chan_op_mode(void __iomem *ioaddr, int mode,
 				       u32 channel, int fifosz, u8 qmode)
 {
 	unsigned int rqs = fifosz / 256 - 1;
-	u32 mtl_rx_op, mtl_rx_int;
+	u32 mtl_rx_op;
 
 	mtl_rx_op = readl(ioaddr + MTL_CHAN_RX_OP_MODE(channel));
 
@@ -283,11 +283,6 @@ static void dwmac4_dma_rx_chan_op_mode(void __iomem *ioaddr, int mode,
 	}
 
 	writel(mtl_rx_op, ioaddr + MTL_CHAN_RX_OP_MODE(channel));
-
-	/* Enable MTL RX overflow */
-	mtl_rx_int = readl(ioaddr + MTL_CHAN_INT_CTRL(channel));
-	writel(mtl_rx_int | MTL_RX_OVERFLOW_INT_EN,
-	       ioaddr + MTL_CHAN_INT_CTRL(channel));
 }
 
 static void dwmac4_dma_tx_chan_op_mode(void __iomem *ioaddr, int mode,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4749bd0af160..a23797267ad0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4162,7 +4162,6 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 	/* To handle GMAC own interrupts */
 	if ((priv->plat->has_gmac) || xmac) {
 		int status = stmmac_host_irq_status(priv, priv->hw, &priv->xstats);
-		int mtl_status;
 
 		if (unlikely(status)) {
 			/* For LPI we need to save the tx status */
@@ -4173,17 +4172,8 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 		}
 
 		for (queue = 0; queue < queues_count; queue++) {
-			struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
-
-			mtl_status = stmmac_host_mtl_irq_status(priv, priv->hw,
-								queue);
-			if (mtl_status != -EINVAL)
-				status |= mtl_status;
-
-			if (status & CORE_IRQ_MTL_RX_OVERFLOW)
-				stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
-						       rx_q->rx_tail_addr,
-						       queue);
+			status = stmmac_host_mtl_irq_status(priv, priv->hw,
+							    queue);
 		}
 
 		/* PCS link status */
-- 
2.30.2