From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
Leon Romanovsky <leonro@nvidia.com>,
Jianbo Liu <jianbol@nvidia.com>,
Ariel Levkovich <lariel@nvidia.com>,
Saeed Mahameed <saeedm@nvidia.com>
Subject: [net 03/16] net/mlx5: Set reformat action when needed for termination rules
Date: Tue, 18 May 2021 23:05:10 -0700 [thread overview]
Message-ID: <20210519060523.17875-4-saeed@kernel.org> (raw)
In-Reply-To: <20210519060523.17875-1-saeed@kernel.org>
From: Jianbo Liu <jianbol@nvidia.com>
For remote mirroring, after the tunnel packets are received, they are
decapsulated and sent to representor, then re-encapsulated and sent
out over another tunnel. So reformat action is set only when the
destination is required to do encapsulation.
Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../mlx5/core/eswitch_offloads_termtbl.c | 31 ++++++-------------
1 file changed, 10 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
index a81ece94f599..e3e7fdd396ad 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
@@ -172,19 +172,6 @@ mlx5_eswitch_termtbl_put(struct mlx5_eswitch *esw,
}
}
-static bool mlx5_eswitch_termtbl_is_encap_reformat(struct mlx5_pkt_reformat *rt)
-{
- switch (rt->reformat_type) {
- case MLX5_REFORMAT_TYPE_L2_TO_VXLAN:
- case MLX5_REFORMAT_TYPE_L2_TO_NVGRE:
- case MLX5_REFORMAT_TYPE_L2_TO_L2_TUNNEL:
- case MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL:
- return true;
- default:
- return false;
- }
-}
-
static void
mlx5_eswitch_termtbl_actions_move(struct mlx5_flow_act *src,
struct mlx5_flow_act *dst)
@@ -202,14 +189,6 @@ mlx5_eswitch_termtbl_actions_move(struct mlx5_flow_act *src,
memset(&src->vlan[1], 0, sizeof(src->vlan[1]));
}
}
-
- if (src->action & MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT &&
- mlx5_eswitch_termtbl_is_encap_reformat(src->pkt_reformat)) {
- src->action &= ~MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
- dst->action |= MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
- dst->pkt_reformat = src->pkt_reformat;
- src->pkt_reformat = NULL;
- }
}
static bool mlx5_eswitch_offload_is_uplink_port(const struct mlx5_eswitch *esw,
@@ -279,6 +258,14 @@ mlx5_eswitch_add_termtbl_rule(struct mlx5_eswitch *esw,
if (dest[i].type != MLX5_FLOW_DESTINATION_TYPE_VPORT)
continue;
+ if (attr->dests[num_vport_dests].flags & MLX5_ESW_DEST_ENCAP) {
+ term_tbl_act.action |= MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
+ term_tbl_act.pkt_reformat = attr->dests[num_vport_dests].pkt_reformat;
+ } else {
+ term_tbl_act.action &= ~MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
+ term_tbl_act.pkt_reformat = NULL;
+ }
+
/* get the terminating table for the action list */
tt = mlx5_eswitch_termtbl_get_create(esw, &term_tbl_act,
&dest[i], attr);
@@ -301,6 +288,8 @@ mlx5_eswitch_add_termtbl_rule(struct mlx5_eswitch *esw,
goto revert_changes;
/* create the FTE */
+ flow_act->action &= ~MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
+ flow_act->pkt_reformat = NULL;
rule = mlx5_add_flow_rules(fdb, spec, flow_act, dest, num_dest);
if (IS_ERR(rule))
goto revert_changes;
--
2.31.1
next prev parent reply other threads:[~2021-05-19 6:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 6:05 [pull request][net 00/16] mlx5 fixes 2021-05-18 Saeed Mahameed
2021-05-19 6:05 ` [net 01/16] {net, RDMA}/mlx5: Fix override of log_max_qp by other device Saeed Mahameed
2021-05-19 19:30 ` patchwork-bot+netdevbpf
2021-05-19 6:05 ` [net 02/16] net/mlx5e: Fix nullptr in add_vlan_push_action() Saeed Mahameed
2021-05-19 6:05 ` Saeed Mahameed [this message]
2021-05-19 6:05 ` [net 04/16] net/mlx5: Fix err prints and return when creating termination table Saeed Mahameed
2021-05-19 6:05 ` [net 05/16] net/mlx5: SF, Fix show state inactive when its inactivated Saeed Mahameed
2021-05-19 6:05 ` [net 06/16] net/mlx5e: Fix nullptr in mlx5e_tc_add_fdb_flow() Saeed Mahameed
2021-05-19 6:05 ` [net 07/16] net/mlx5e: Fix null deref accessing lag dev Saeed Mahameed
2021-05-19 6:05 ` [net 08/16] net/mlx5e: Make sure fib dev exists in fib event Saeed Mahameed
2021-05-19 6:05 ` [net 09/16] net/mlx5e: reset XPS on error flow if netdev isn't registered yet Saeed Mahameed
2021-05-19 6:05 ` [net 10/16] net/mlx5e: Fix multipath lag activation Saeed Mahameed
2021-05-19 6:05 ` [net 11/16] net/mlx5e: Reject mirroring on source port change encap rules Saeed Mahameed
2021-05-19 6:05 ` [net 12/16] net/mlx5e: Fix error path of updating netdev queues Saeed Mahameed
2021-05-19 6:05 ` [net 13/16] {net,vdpa}/mlx5: Configure interface MAC into mpfs L2 table Saeed Mahameed
2021-05-19 6:05 ` [net 14/16] net/mlx5: Don't overwrite HCA capabilities when setting MSI-X count Saeed Mahameed
2021-05-19 6:05 ` [net 15/16] net/mlx5: Set term table as an unmanaged flow table Saeed Mahameed
2021-05-19 6:05 ` [net 16/16] mlx5e: add add missing BH locking around napi_schdule() Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210519060523.17875-4-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=jianbol@nvidia.com \
--cc=kuba@kernel.org \
--cc=lariel@nvidia.com \
--cc=leonro@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).