From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
Huy Nguyen <huyn@nvidia.com>, Raed Salem <raeds@nvidia.com>,
Saeed Mahameed <saeedm@nvidia.com>
Subject: [net-next V2 05/15] net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
Date: Thu, 27 May 2021 11:56:14 -0700 [thread overview]
Message-ID: <20210527185624.694304-6-saeed@kernel.org> (raw)
In-Reply-To: <20210527185624.694304-1-saeed@kernel.org>
From: Huy Nguyen <huyn@nvidia.com>
rep_tc copy REG_C1 to REG_B. IPsec crypto utilizes the whole REG_B
register with BIT31 as IPsec marker. rep_tc_update_skb drops
IPsec because it thought REG_B contains bad value.
In previous patch, BIT 31 of REG_C1 is reserved for IPsec.
Skip the rep_tc_update_skb if BIT31 of REG_B is set.
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index f90894eea9e0..5346271974f5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -1310,7 +1310,8 @@ static void mlx5e_handle_rx_cqe_rep(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)
if (rep->vlan && skb_vlan_tag_present(skb))
skb_vlan_pop(skb);
- if (!mlx5e_rep_tc_update_skb(cqe, skb, &tc_priv)) {
+ if (unlikely(!mlx5_ipsec_is_rx_flow(cqe) &&
+ !mlx5e_rep_tc_update_skb(cqe, skb, &tc_priv))) {
dev_kfree_skb_any(skb);
goto free_wqe;
}
@@ -1367,7 +1368,8 @@ static void mlx5e_handle_rx_cqe_mpwrq_rep(struct mlx5e_rq *rq, struct mlx5_cqe64
mlx5e_complete_rx_cqe(rq, cqe, cqe_bcnt, skb);
- if (!mlx5e_rep_tc_update_skb(cqe, skb, &tc_priv)) {
+ if (unlikely(!mlx5_ipsec_is_rx_flow(cqe) &&
+ !mlx5e_rep_tc_update_skb(cqe, skb, &tc_priv))) {
dev_kfree_skb_any(skb);
goto mpwrq_cqe_out;
}
--
2.31.1
next prev parent reply other threads:[~2021-05-27 18:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-27 18:56 [pull request][net-next V2 00/15] mlx5 misc updates 2021-05-26 Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 01/15] net/mlx5e: CT, Remove newline from ct_dbg call Saeed Mahameed
2021-05-28 0:30 ` patchwork-bot+netdevbpf
2021-05-27 18:56 ` [net-next V2 02/15] net/mlx5: CT: Avoid reusing modify header context for natted entries Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 03/15] net/mlx5e: TC: Use bit counts for register mapping Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 04/15] net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload Saeed Mahameed
2021-05-27 18:56 ` Saeed Mahameed [this message]
2021-05-27 18:56 ` [net-next V2 06/15] net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 07/15] net/mlx5: DR, Remove unused field of send_ring struct Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 08/15] net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 09/15] net/mlx5: Move table size calculation to steering cmd layer Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 10/15] net/mlx5: Move chains ft pool to be used by all firmware steering Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 11/15] net/mlx5: DR, Set max table size to 2G entries Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 12/15] net/mlx5: Cap the maximum flow group size to 16M entries Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 13/15] net/mlx5: Remove unnecessary spin lock protection Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 14/15] net/mlx5: Use boolean arithmetic to evaluate roce_lag Saeed Mahameed
2021-05-27 18:56 ` [net-next V2 15/15] net/mlx5: Fix lag port remapping logic Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210527185624.694304-6-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=huyn@nvidia.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=raeds@nvidia.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).