netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>,
	Michael Walle <michael@walle.cc>, Po Liu <po.liu@nxp.com>,
	Vinicius Costa Gomes <vinicius.gomes@intel.com>,
	Vladimir Oltean <vladimir.oltean@nxp.com>
Subject: [PATCH net-next 1/2] net: enetc: manage ENETC_F_QBV in priv->active_offloads only when enabled
Date: Wed,  2 Jun 2021 15:21:13 +0300	[thread overview]
Message-ID: <20210602122114.2082344-2-olteanv@gmail.com> (raw)
In-Reply-To: <20210602122114.2082344-1-olteanv@gmail.com>

From: Vladimir Oltean <vladimir.oltean@nxp.com>

All the other flags in priv->active_offloads are managed dynamically,
except ENETC_F_QBV which is set statically based on the probed SI capability.

This change makes priv->active_offloads & ENETC_F_QBV track the presence
of a tc-taprio schedule on the port. Calling enetc_sched_speed_set()
from phylink_mac_link_up() is kept unconditional as long as Qbv is
supported at all on the port, because the tc-taprio offload does not
re-trigger another link mode resolve, so the scheduler needs to be
functional from the get go.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/ethernet/freescale/enetc/enetc_pf.c  | 6 ++----
 drivers/net/ethernet/freescale/enetc/enetc_qos.c | 6 ++++++
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 31274325159a..aced941e57e1 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -769,9 +769,6 @@ static void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 
 	ndev->priv_flags |= IFF_UNICAST_FLT;
 
-	if (si->hw_features & ENETC_SI_F_QBV)
-		priv->active_offloads |= ENETC_F_QBV;
-
 	if (si->hw_features & ENETC_SI_F_PSFP && !enetc_psfp_enable(priv)) {
 		priv->active_offloads |= ENETC_F_QCI;
 		ndev->features |= NETIF_F_HW_TC;
@@ -1022,7 +1019,8 @@ static void enetc_pl_mac_link_up(struct phylink_config *config,
 	int idx;
 
 	priv = netdev_priv(pf->si->ndev);
-	if (priv->active_offloads & ENETC_F_QBV)
+
+	if (pf->si->hw_features & ENETC_SI_F_QBV)
 		enetc_sched_speed_set(priv, speed);
 
 	if (!phylink_autoneg_inband(mode) &&
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
index 4577226d3c6a..23ac6e1551ca 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
@@ -69,6 +69,9 @@ static int enetc_setup_taprio(struct net_device *ndev,
 		enetc_wr(&priv->si->hw,
 			 ENETC_QBV_PTGCR_OFFSET,
 			 tge & (~ENETC_QBV_TGE));
+
+		priv->active_offloads &= ~ENETC_F_QBV;
+
 		return 0;
 	}
 
@@ -135,6 +138,9 @@ static int enetc_setup_taprio(struct net_device *ndev,
 	dma_unmap_single(&priv->si->pdev->dev, dma, data_size, DMA_TO_DEVICE);
 	kfree(gcl_data);
 
+	if (!err)
+		priv->active_offloads |= ENETC_F_QBV;
+
 	return err;
 }
 
-- 
2.25.1


  reply	other threads:[~2021-06-02 12:21 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02 12:21 [PATCH net-next 0/2] Report tc-taprio window drops in NXP ENETC driver Vladimir Oltean
2021-06-02 12:21 ` Vladimir Oltean [this message]
2021-06-02 12:21 ` [PATCH net-next 2/2] net: enetc: count the tc-taprio window drops Vladimir Oltean
2021-06-02 17:19   ` Jakub Kicinski
2021-06-02 17:59     ` Vladimir Oltean
2021-06-02 21:30       ` Jakub Kicinski
  -- strict thread matches above, loose matches on Subject: below --
2022-05-10 16:36 [PATCH net-next 0/2] Count tc-taprio window drops in enetc driver Vladimir Oltean
2022-05-10 16:36 ` [PATCH net-next 1/2] net: enetc: manage ENETC_F_QBV in priv->active_offloads only when enabled Vladimir Oltean
2022-05-11  8:17   ` Claudiu Manoil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602122114.2082344-2-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=michael@walle.cc \
    --cc=netdev@vger.kernel.org \
    --cc=po.liu@nxp.com \
    --cc=vinicius.gomes@intel.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).