From: Vladimir Oltean <olteanv@gmail.com>
To: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com>,
Jakub Kicinski <kuba@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, Ong Boon Leong <boon.leong.ong@intel.com>,
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <vladimir.oltean@nxp.com>
Subject: Re: [RFC PATCH v2 net-next 9/9] net: pcs: xpcs: convert to phylink_pcs_ops
Date: Wed, 2 Jun 2021 17:02:33 +0300 [thread overview]
Message-ID: <20210602140233.3zk6mtr7turmza2r@skbuf> (raw)
In-Reply-To: <20210602134749.GL30436@shell.armlinux.org.uk>
On Wed, Jun 02, 2021 at 02:47:49PM +0100, Russell King (Oracle) wrote:
> On Wed, Jun 02, 2021 at 04:43:21PM +0300, Vladimir Oltean wrote:
> > On Tue, Jun 01, 2021 at 01:10:33PM +0100, Russell King (Oracle) wrote:
> > > On Tue, Jun 01, 2021 at 03:33:25AM +0300, Vladimir Oltean wrote:
> > > > static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
> > > > .validate = stmmac_validate,
> > > > - .mac_pcs_get_state = stmmac_mac_pcs_get_state,
> > > > - .mac_config = stmmac_mac_config,
> > >
> > > mac_config is still a required function.
> >
> > This is correct, thanks.
> >
> > VK, would you mind testing again with this extra patch added to the mix?
> > If it works, I will add it to the series in v3, ordered properly.
> >
> > -----------------------------[ cut here]-----------------------------
> > From a79863027998451c73d5bbfaf1b77cf6097a110c Mon Sep 17 00:00:00 2001
> > From: Vladimir Oltean <vladimir.oltean@nxp.com>
> > Date: Wed, 2 Jun 2021 16:35:55 +0300
> > Subject: [PATCH] net: phylink: allow the mac_config method to be missing if
> > pcs_ops are provided
> >
> > The pcs_config method from struct phylink_pcs_ops does everything that
> > the mac_config method from struct phylink_mac_ops used to do in the
> > legacy approach of driving a MAC PCS. So allow drivers to not implement
> > the mac_config method if there is nothing to do. Keep the method
> > required for setups that do not provide pcs_ops.
> >
> > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> > ---
> > drivers/net/phy/phylink.c | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> > index 96d8e88b4e46..a8842c6ce3a2 100644
> > --- a/drivers/net/phy/phylink.c
> > +++ b/drivers/net/phy/phylink.c
> > @@ -415,6 +415,9 @@ static void phylink_resolve_flow(struct phylink_link_state *state)
> > static void phylink_mac_config(struct phylink *pl,
> > const struct phylink_link_state *state)
> > {
> > + if (!pl->mac_ops->mac_config)
> > + return;
> > +
> > phylink_dbg(pl,
> > "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
> > __func__, phylink_an_mode_str(pl->cur_link_an_mode),
> > @@ -1192,6 +1195,12 @@ void phylink_start(struct phylink *pl)
> >
> > ASSERT_RTNL();
> >
> > + /* The mac_ops::mac_config method may be absent only if the
> > + * pcs_ops are present.
> > + */
> > + if (WARN_ON_ONCE(!pl->mac_ops->mac_config && !pl->pcs_ops))
> > + return;
> > +
> > phylink_info(pl, "configuring for %s/%s link mode\n",
> > phylink_an_mode_str(pl->cur_link_an_mode),
> > phy_modes(pl->link_config.interface));
>
> I would rather we didn't do that - I suspect your case is not the
> common scenario, so please add a dummy function to stmmac instead.
Ok, in that case the only delta to be applied should be:
-----------------------------[ cut here]-----------------------------
From 998569108392befc591f790e46fe5dcd1d0b6278 Mon Sep 17 00:00:00 2001
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Wed, 2 Jun 2021 17:00:12 +0300
Subject: [PATCH] fixup! net: pcs: xpcs: convert to phylink_pcs_ops
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d5685a74f3b7..704aa91b145a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1000,6 +1000,12 @@ static void stmmac_validate(struct phylink_config *config,
xpcs_validate(priv->hw->xpcs, supported, state);
}
+static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ /* Nothing to do, xpcs_config() handles everything */
+}
+
static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
{
struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
-----------------------------[ cut here]-----------------------------
next prev parent reply other threads:[~2021-06-02 14:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 0:33 [RFC PATCH v2 net-next 0/9] Convert xpcs to phylink_pcs_ops Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 1/9] net: pcs: xpcs: delete shim definition for mdio_xpcs_get_ops() Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 2/9] net: pcs: xpcs: there is only one PHY ID Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 3/9] net: pcs: xpcs: make the checks related to the PHY interface mode stateless Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 4/9] net: pcs: xpcs: export xpcs_validate Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 5/9] net: pcs: xpcs: export xpcs_config_eee Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 6/9] net: pcs: xpcs: export xpcs_probe Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 7/9] net: pcs: xpcs: use mdiobus_c45_addr in xpcs_{read,write} Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 8/9] net: pcs: xpcs: convert to mdio_device Vladimir Oltean
2021-06-01 0:33 ` [RFC PATCH v2 net-next 9/9] net: pcs: xpcs: convert to phylink_pcs_ops Vladimir Oltean
2021-06-01 12:10 ` Russell King (Oracle)
2021-06-02 13:43 ` Vladimir Oltean
2021-06-02 13:47 ` Russell King (Oracle)
2021-06-02 14:02 ` Vladimir Oltean [this message]
2021-06-02 14:43 ` Wong Vee Khee
2021-06-02 14:57 ` Vladimir Oltean
2021-06-02 15:10 ` Wong Vee Khee
2021-06-02 15:14 ` Vladimir Oltean
2021-06-02 15:28 ` Wong Vee Khee
2021-06-01 8:20 ` [RFC PATCH v2 net-next 0/9] Convert xpcs " Wong Vee Khee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210602140233.3zk6mtr7turmza2r@skbuf \
--to=olteanv@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=michael.wei.hong.sit@intel.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=vee.khee.wong@linux.intel.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox