netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>,
	netdev@vger.kernel.org, sassmann@redhat.com,
	anthony.l.nguyen@intel.com, magnus.karlsson@intel.com,
	Kiran Bhandare <kiranx.bhandare@intel.com>
Subject: [PATCH net 2/2] ice: parameterize functions responsible for Tx ring management
Date: Wed,  9 Jun 2021 13:48:03 -0700	[thread overview]
Message-ID: <20210609204803.234983-3-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20210609204803.234983-1-anthony.l.nguyen@intel.com>

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

Commit ae15e0ba1b33 ("ice: Change number of XDP Tx queues to match
number of Rx queues") tried to address the incorrect setting of XDP
queue count that was based on the Tx queue count, whereas in theory we
should provide the XDP queue per Rx queue. However, the routines that
setup and destroy the set of Tx resources are still based on the
vsi->num_txq.

Ice supports the asynchronous Tx/Rx queue count, so for a setup where
vsi->num_txq > vsi->num_rxq, ice_vsi_stop_tx_rings and ice_vsi_cfg_txqs
will be accessing the vsi->xdp_rings out of the bounds.

Parameterize two mentioned functions so they get the size of Tx resources
array as the input.

Fixes: ae15e0ba1b33 ("ice: Change number of XDP Tx queues to match number of Rx queues")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_lib.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index d70ee573fde5..27f9dac8719c 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -1717,12 +1717,13 @@ int ice_vsi_cfg_rxqs(struct ice_vsi *vsi)
  * ice_vsi_cfg_txqs - Configure the VSI for Tx
  * @vsi: the VSI being configured
  * @rings: Tx ring array to be configured
+ * @count: number of Tx ring array elements
  *
  * Return 0 on success and a negative value on error
  * Configure the Tx VSI for operation.
  */
 static int
-ice_vsi_cfg_txqs(struct ice_vsi *vsi, struct ice_ring **rings)
+ice_vsi_cfg_txqs(struct ice_vsi *vsi, struct ice_ring **rings, u16 count)
 {
 	struct ice_aqc_add_tx_qgrp *qg_buf;
 	u16 q_idx = 0;
@@ -1734,7 +1735,7 @@ ice_vsi_cfg_txqs(struct ice_vsi *vsi, struct ice_ring **rings)
 
 	qg_buf->num_txqs = 1;
 
-	for (q_idx = 0; q_idx < vsi->num_txq; q_idx++) {
+	for (q_idx = 0; q_idx < count; q_idx++) {
 		err = ice_vsi_cfg_txq(vsi, rings[q_idx], qg_buf);
 		if (err)
 			goto err_cfg_txqs;
@@ -1754,7 +1755,7 @@ ice_vsi_cfg_txqs(struct ice_vsi *vsi, struct ice_ring **rings)
  */
 int ice_vsi_cfg_lan_txqs(struct ice_vsi *vsi)
 {
-	return ice_vsi_cfg_txqs(vsi, vsi->tx_rings);
+	return ice_vsi_cfg_txqs(vsi, vsi->tx_rings, vsi->num_txq);
 }
 
 /**
@@ -1769,7 +1770,7 @@ int ice_vsi_cfg_xdp_txqs(struct ice_vsi *vsi)
 	int ret;
 	int i;
 
-	ret = ice_vsi_cfg_txqs(vsi, vsi->xdp_rings);
+	ret = ice_vsi_cfg_txqs(vsi, vsi->xdp_rings, vsi->num_xdp_txq);
 	if (ret)
 		return ret;
 
@@ -2009,17 +2010,18 @@ int ice_vsi_stop_all_rx_rings(struct ice_vsi *vsi)
  * @rst_src: reset source
  * @rel_vmvf_num: Relative ID of VF/VM
  * @rings: Tx ring array to be stopped
+ * @count: number of Tx ring array elements
  */
 static int
 ice_vsi_stop_tx_rings(struct ice_vsi *vsi, enum ice_disq_rst_src rst_src,
-		      u16 rel_vmvf_num, struct ice_ring **rings)
+		      u16 rel_vmvf_num, struct ice_ring **rings, u16 count)
 {
 	u16 q_idx;
 
 	if (vsi->num_txq > ICE_LAN_TXQ_MAX_QDIS)
 		return -EINVAL;
 
-	for (q_idx = 0; q_idx < vsi->num_txq; q_idx++) {
+	for (q_idx = 0; q_idx < count; q_idx++) {
 		struct ice_txq_meta txq_meta = { };
 		int status;
 
@@ -2047,7 +2049,7 @@ int
 ice_vsi_stop_lan_tx_rings(struct ice_vsi *vsi, enum ice_disq_rst_src rst_src,
 			  u16 rel_vmvf_num)
 {
-	return ice_vsi_stop_tx_rings(vsi, rst_src, rel_vmvf_num, vsi->tx_rings);
+	return ice_vsi_stop_tx_rings(vsi, rst_src, rel_vmvf_num, vsi->tx_rings, vsi->num_txq);
 }
 
 /**
@@ -2056,7 +2058,7 @@ ice_vsi_stop_lan_tx_rings(struct ice_vsi *vsi, enum ice_disq_rst_src rst_src,
  */
 int ice_vsi_stop_xdp_tx_rings(struct ice_vsi *vsi)
 {
-	return ice_vsi_stop_tx_rings(vsi, ICE_NO_RESET, 0, vsi->xdp_rings);
+	return ice_vsi_stop_tx_rings(vsi, ICE_NO_RESET, 0, vsi->xdp_rings, vsi->num_xdp_txq);
 }
 
 /**
-- 
2.26.2


  parent reply	other threads:[~2021-06-09 20:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-09 20:48 [PATCH net 0/2][pull request] Intel Wired LAN Driver Updates 2021-06-09 Tony Nguyen
2021-06-09 20:48 ` [PATCH net 1/2] ice: add ndo_bpf callback for safe mode netdev ops Tony Nguyen
2021-06-09 20:48 ` Tony Nguyen [this message]
2021-06-10 20:50 ` [PATCH net 0/2][pull request] Intel Wired LAN Driver Updates 2021-06-09 patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210609204803.234983-3-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=kiranx.bhandare@intel.com \
    --cc=kuba@kernel.org \
    --cc=maciej.fijalkowski@intel.com \
    --cc=magnus.karlsson@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).