From: Florian Westphal <fw@strlen.de>
To: netdev@vger.kernel.org
Cc: steffen.klassert@secunet.com, herbert@gondor.apana.org.au,
Florian Westphal <fw@strlen.de>
Subject: [PATCH ipsec-next 2/5] xfrm: ipv6: move mip6_destopt_offset into xfrm core
Date: Thu, 10 Jun 2021 14:06:26 +0200 [thread overview]
Message-ID: <20210610120629.23088-3-fw@strlen.de> (raw)
In-Reply-To: <20210610120629.23088-1-fw@strlen.de>
This helper is relatively small, just move this to the xfrm core
and call it directly.
Next patch does the same for the ROUTING type.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/ipv6/mip6.c | 49 ------------------------------------
net/xfrm/xfrm_output.c | 57 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 49 deletions(-)
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index bc560e1664aa..fba3b56a7dd2 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -247,54 +247,6 @@ static int mip6_destopt_reject(struct xfrm_state *x, struct sk_buff *skb,
return err;
}
-static int mip6_destopt_offset(struct xfrm_state *x, struct sk_buff *skb,
- u8 **nexthdr)
-{
- u16 offset = sizeof(struct ipv6hdr);
- struct ipv6_opt_hdr *exthdr =
- (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
- const unsigned char *nh = skb_network_header(skb);
- unsigned int packet_len = skb_tail_pointer(skb) -
- skb_network_header(skb);
- int found_rhdr = 0;
-
- *nexthdr = &ipv6_hdr(skb)->nexthdr;
-
- while (offset + 1 <= packet_len) {
-
- switch (**nexthdr) {
- case NEXTHDR_HOP:
- break;
- case NEXTHDR_ROUTING:
- found_rhdr = 1;
- break;
- case NEXTHDR_DEST:
- /*
- * HAO MUST NOT appear more than once.
- * XXX: It is better to try to find by the end of
- * XXX: packet if HAO exists.
- */
- if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0) {
- net_dbg_ratelimited("mip6: hao exists already, override\n");
- return offset;
- }
-
- if (found_rhdr)
- return offset;
-
- break;
- default:
- return offset;
- }
-
- offset += ipv6_optlen(exthdr);
- *nexthdr = &exthdr->nexthdr;
- exthdr = (struct ipv6_opt_hdr *)(nh + offset);
- }
-
- return offset;
-}
-
static int mip6_destopt_init_state(struct xfrm_state *x)
{
if (x->id.spi) {
@@ -332,7 +284,6 @@ static const struct xfrm_type mip6_destopt_type = {
.input = mip6_destopt_input,
.output = mip6_destopt_output,
.reject = mip6_destopt_reject,
- .hdr_offset = mip6_destopt_offset,
};
static int mip6_rthdr_input(struct xfrm_state *x, struct sk_buff *skb)
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 6b44b6e738f7..29959054a535 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -77,8 +77,65 @@ static int xfrm4_transport_output(struct xfrm_state *x, struct sk_buff *skb)
return 0;
}
+#if IS_ENABLED(CONFIG_IPV6_MIP6)
+static int mip6_destopt_offset(struct xfrm_state *x, struct sk_buff *skb,
+ u8 **nexthdr)
+{
+ u16 offset = sizeof(struct ipv6hdr);
+ struct ipv6_opt_hdr *exthdr =
+ (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
+ const unsigned char *nh = skb_network_header(skb);
+ unsigned int packet_len = skb_tail_pointer(skb) -
+ skb_network_header(skb);
+ int found_rhdr = 0;
+
+ *nexthdr = &ipv6_hdr(skb)->nexthdr;
+
+ while (offset + 1 <= packet_len) {
+ switch (**nexthdr) {
+ case NEXTHDR_HOP:
+ break;
+ case NEXTHDR_ROUTING:
+ found_rhdr = 1;
+ break;
+ case NEXTHDR_DEST:
+ /* HAO MUST NOT appear more than once.
+ * XXX: It is better to try to find by the end of
+ * XXX: packet if HAO exists.
+ */
+ if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0) {
+ net_dbg_ratelimited("mip6: hao exists already, override\n");
+ return offset;
+ }
+
+ if (found_rhdr)
+ return offset;
+
+ break;
+ default:
+ return offset;
+ }
+
+ offset += ipv6_optlen(exthdr);
+ *nexthdr = &exthdr->nexthdr;
+ exthdr = (struct ipv6_opt_hdr *)(nh + offset);
+ }
+
+ return offset;
+}
+#endif
+
static int xfrm6_hdr_offset(struct xfrm_state *x, struct sk_buff *skb, u8 **prevhdr)
{
+ switch (x->type->proto) {
+#if IS_ENABLED(CONFIG_IPV6_MIP6)
+ case IPPROTO_DSTOPTS:
+ return mip6_destopt_offset(x, skb, prevhdr);
+#endif
+ default:
+ break;
+ }
+
return x->type->hdr_offset(x, skb, prevhdr);
}
--
2.31.1
next prev parent reply other threads:[~2021-06-10 12:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 12:06 [PATCH ipsec-next 0/5] xfrm: ipv6: remove hdr_off indirection Florian Westphal
2021-06-10 12:06 ` [PATCH ipsec-next 1/5] xfrm: ipv6: add xfrm6_hdr_offset helper Florian Westphal
2021-06-10 12:06 ` Florian Westphal [this message]
2021-06-10 12:06 ` [PATCH ipsec-next 3/5] xfrm: ipv6: move mip6_rthdr_offset into xfrm core Florian Westphal
2021-06-10 12:06 ` [PATCH ipsec-next 4/5] xfrm: remove hdr_offset indirection Florian Westphal
2021-06-10 12:06 ` [PATCH ipsec-next 5/5] xfrm: merge dstopt and routing hdroff functions Florian Westphal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210610120629.23088-3-fw@strlen.de \
--to=fw@strlen.de \
--cc=herbert@gondor.apana.org.au \
--cc=netdev@vger.kernel.org \
--cc=steffen.klassert@secunet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).