From: Florian Westphal <fw@strlen.de>
To: netdev@vger.kernel.org
Cc: steffen.klassert@secunet.com, herbert@gondor.apana.org.au,
Florian Westphal <fw@strlen.de>
Subject: [PATCH ipsec-next 3/5] xfrm: ipv6: move mip6_rthdr_offset into xfrm core
Date: Thu, 10 Jun 2021 14:06:27 +0200 [thread overview]
Message-ID: <20210610120629.23088-4-fw@strlen.de> (raw)
In-Reply-To: <20210610120629.23088-1-fw@strlen.de>
Place the call into the xfrm core. After this all remaining users
set the hdr_offset function pointer to the same function which opens
the possiblity to remove the indirection.
Signed-off-by: Florian Westphal <fw@strlen.de>
---
net/ipv6/mip6.c | 48 -----------------------------------------
net/xfrm/xfrm_output.c | 49 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 49 insertions(+), 48 deletions(-)
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index fba3b56a7dd2..aeb35d26e474 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -333,53 +333,6 @@ static int mip6_rthdr_output(struct xfrm_state *x, struct sk_buff *skb)
return 0;
}
-static int mip6_rthdr_offset(struct xfrm_state *x, struct sk_buff *skb,
- u8 **nexthdr)
-{
- u16 offset = sizeof(struct ipv6hdr);
- struct ipv6_opt_hdr *exthdr =
- (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
- const unsigned char *nh = skb_network_header(skb);
- unsigned int packet_len = skb_tail_pointer(skb) -
- skb_network_header(skb);
- int found_rhdr = 0;
-
- *nexthdr = &ipv6_hdr(skb)->nexthdr;
-
- while (offset + 1 <= packet_len) {
-
- switch (**nexthdr) {
- case NEXTHDR_HOP:
- break;
- case NEXTHDR_ROUTING:
- if (offset + 3 <= packet_len) {
- struct ipv6_rt_hdr *rt;
- rt = (struct ipv6_rt_hdr *)(nh + offset);
- if (rt->type != 0)
- return offset;
- }
- found_rhdr = 1;
- break;
- case NEXTHDR_DEST:
- if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0)
- return offset;
-
- if (found_rhdr)
- return offset;
-
- break;
- default:
- return offset;
- }
-
- offset += ipv6_optlen(exthdr);
- *nexthdr = &exthdr->nexthdr;
- exthdr = (struct ipv6_opt_hdr *)(nh + offset);
- }
-
- return offset;
-}
-
static int mip6_rthdr_init_state(struct xfrm_state *x)
{
if (x->id.spi) {
@@ -413,7 +366,6 @@ static const struct xfrm_type mip6_rthdr_type = {
.destructor = mip6_rthdr_destroy,
.input = mip6_rthdr_input,
.output = mip6_rthdr_output,
- .hdr_offset = mip6_rthdr_offset,
};
static int __init mip6_init(void)
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 29959054a535..1734339b6dd0 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -123,6 +123,53 @@ static int mip6_destopt_offset(struct xfrm_state *x, struct sk_buff *skb,
return offset;
}
+
+static int mip6_rthdr_offset(struct xfrm_state *x, struct sk_buff *skb,
+ u8 **nexthdr)
+{
+ u16 offset = sizeof(struct ipv6hdr);
+ struct ipv6_opt_hdr *exthdr =
+ (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
+ const unsigned char *nh = skb_network_header(skb);
+ unsigned int packet_len = skb_tail_pointer(skb) -
+ skb_network_header(skb);
+ int found_rhdr = 0;
+
+ *nexthdr = &ipv6_hdr(skb)->nexthdr;
+
+ while (offset + 1 <= packet_len) {
+ switch (**nexthdr) {
+ case NEXTHDR_HOP:
+ break;
+ case NEXTHDR_ROUTING:
+ if (offset + 3 <= packet_len) {
+ struct ipv6_rt_hdr *rt;
+
+ rt = (struct ipv6_rt_hdr *)(nh + offset);
+ if (rt->type != 0)
+ return offset;
+ }
+ found_rhdr = 1;
+ break;
+ case NEXTHDR_DEST:
+ if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0)
+ return offset;
+
+ if (found_rhdr)
+ return offset;
+
+ break;
+ default:
+ return offset;
+ }
+
+ offset += ipv6_optlen(exthdr);
+ *nexthdr = &exthdr->nexthdr;
+ exthdr = (struct ipv6_opt_hdr *)(nh + offset);
+ }
+
+ return offset;
+}
#endif
static int xfrm6_hdr_offset(struct xfrm_state *x, struct sk_buff *skb, u8 **prevhdr)
@@ -131,6 +178,8 @@ static int xfrm6_hdr_offset(struct xfrm_state *x, struct sk_buff *skb, u8 **prev
#if IS_ENABLED(CONFIG_IPV6_MIP6)
case IPPROTO_DSTOPTS:
return mip6_destopt_offset(x, skb, prevhdr);
+ case IPPROTO_ROUTING:
+ return mip6_rthdr_offset(x, skb, prevhdr);
#endif
default:
break;
--
2.31.1
next prev parent reply other threads:[~2021-06-10 12:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 12:06 [PATCH ipsec-next 0/5] xfrm: ipv6: remove hdr_off indirection Florian Westphal
2021-06-10 12:06 ` [PATCH ipsec-next 1/5] xfrm: ipv6: add xfrm6_hdr_offset helper Florian Westphal
2021-06-10 12:06 ` [PATCH ipsec-next 2/5] xfrm: ipv6: move mip6_destopt_offset into xfrm core Florian Westphal
2021-06-10 12:06 ` Florian Westphal [this message]
2021-06-10 12:06 ` [PATCH ipsec-next 4/5] xfrm: remove hdr_offset indirection Florian Westphal
2021-06-10 12:06 ` [PATCH ipsec-next 5/5] xfrm: merge dstopt and routing hdroff functions Florian Westphal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210610120629.23088-4-fw@strlen.de \
--to=fw@strlen.de \
--cc=herbert@gondor.apana.org.au \
--cc=netdev@vger.kernel.org \
--cc=steffen.klassert@secunet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).