From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Russell King <linux@armlinux.org.uk>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mips@vger.kernel.org
Subject: [PATCH net-next v2 5/6] net: dsa: qca: ar9331: add bridge support
Date: Fri, 2 Jul 2021 12:17:50 +0200 [thread overview]
Message-ID: <20210702101751.13168-6-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210702101751.13168-1-o.rempel@pengutronix.de>
This switch is providing forwarding matrix, with it we can configure
individual bridges. Potentially we can configure more than one not VLAN
based bridge on this HW.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/qca/ar9331.c | 53 ++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index 2abec323ef14..66456752a436 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -40,6 +40,7 @@
*/
#include <linux/bitfield.h>
+#include <linux/if_bridge.h>
#include <linux/module.h>
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
@@ -1095,6 +1096,56 @@ static int ar9331_sw_set_ageing_time(struct dsa_switch *ds,
val);
}
+static int ar9331_sw_port_bridge_mod(struct dsa_switch *ds, int port,
+ struct net_device *br, bool join)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int port_mask = BIT(dsa_to_port(ds, port)->cpu_dp->index);
+ int i, ret;
+ u32 val;
+
+ for (i = 0; i < ds->num_ports; i++) {
+ if (dsa_to_port(ds, i)->bridge_dev != br)
+ continue;
+
+ if (!dsa_is_user_port(ds, port))
+ continue;
+
+ val = FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, BIT(port));
+ ret = regmap_set_bits(regmap, AR9331_SW_REG_PORT_VLAN(i), val);
+ if (ret)
+ goto error;
+
+ if (join && i != port)
+ port_mask |= BIT(i);
+ }
+
+ val = FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask);
+ ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_VLAN(port),
+ AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, val);
+ if (ret)
+ goto error;
+
+ return 0;
+error:
+ dev_err(priv->dev, "%s: error: %i\n", __func__, ret);
+
+ return ret;
+}
+
+static int ar9331_sw_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *br)
+{
+ return ar9331_sw_port_bridge_mod(ds, port, br, true);
+}
+
+static void ar9331_sw_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct net_device *br)
+{
+ ar9331_sw_port_bridge_mod(ds, port, br, false);
+}
+
static const struct dsa_switch_ops ar9331_sw_ops = {
.get_tag_protocol = ar9331_sw_get_tag_protocol,
.setup = ar9331_sw_setup,
@@ -1111,6 +1162,8 @@ static const struct dsa_switch_ops ar9331_sw_ops = {
.port_mdb_add = ar9331_sw_port_mdb_add,
.port_mdb_del = ar9331_sw_port_mdb_del,
.set_ageing_time = ar9331_sw_set_ageing_time,
+ .port_bridge_join = ar9331_sw_port_bridge_join,
+ .port_bridge_leave = ar9331_sw_port_bridge_leave,
};
static irqreturn_t ar9331_sw_irq(int irq, void *data)
--
2.30.2
next prev parent reply other threads:[~2021-07-02 10:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-02 10:17 [PATCH net-next v2 0/6] ar9331: mainline some parts of switch functionality Oleksij Rempel
2021-07-02 10:17 ` [PATCH net-next v2 1/6] net: dsa: qca: ar9331: reorder MDIO write sequence Oleksij Rempel
2021-07-02 10:17 ` [PATCH net-next v2 2/6] net: dsa: qca: ar9331: make proper initial port defaults Oleksij Rempel
2021-07-02 15:06 ` Andrew Lunn
2021-07-02 10:17 ` [PATCH net-next v2 3/6] net: dsa: qca: ar9331: add forwarding database support Oleksij Rempel
2021-07-02 15:14 ` [PATCH net-next v2 3/6] net: dsa: qca: ar9331: add forwarding database support' Andrew Lunn
2021-07-03 8:56 ` Oleksij Rempel
2021-07-03 14:33 ` Andrew Lunn
2021-07-02 10:17 ` [PATCH net-next v2 4/6] net: dsa: qca: ar9331: add ageing time support Oleksij Rempel
2021-07-02 10:17 ` Oleksij Rempel [this message]
2021-07-02 10:17 ` [PATCH net-next v2 6/6] net: dsa: qca: ar9331: add vlan support Oleksij Rempel
2021-07-02 20:38 ` [PATCH net-next v2 0/6] ar9331: mainline some parts of switch functionality David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210702101751.13168-6-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).